clk: vc5: Add support for IDT VersaClock 5P49V5923 and 5P49V5933

Add driver for IDT VersaClock 5 5P49V5923 and 5P49V5933 chips. These
chips have two clock inputs, XTAL or CLK, which are muxed into single
PLL/VCO input. In case of 5P49V5923, the XTAL in built into the chip
while the 5P49V5923 requires external XTAL.

The PLL feeds two fractional dividers. Each fractional divider feeds
output mux, which allows selecting between clock from the fractional
divider itself or from output mux on output N-1. In case of output
mux 0, the output N-1 is instead connected to the output from the mux
feeding the PLL.

The driver thus far supports only the 5P49V5923 and 5P49V5933, while
it should be easily extensible to the whole 5P49V59xx family of chips
as they are all pretty similar.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

MAINTAINERS

@@ -6185,6 +6185,11 @@ S:	Maintained
 F:	drivers/mfd/lpc_ich.c
 F:	drivers/gpio/gpio-ich.c
 
+IDT VersaClock 5 CLOCK DRIVER
+M:	Marek Vasut <marek.vasut@gmail.com>
+S:	Maintained
+F:	drivers/clk/clk-versaclock5.c
+
 IDE SUBSYSTEM
 M:	"David S. Miller" <davem@davemloft.net>
 L:	linux-ide@vger.kernel.org

drivers/clk/Kconfig

@@ -199,6 +199,16 @@ config COMMON_CLK_OXNAS
 	---help---
 	  Support for the OXNAS SoC Family clocks.
 
+config COMMON_CLK_VC5
+	tristate "Clock driver for IDT VersaClock5 devices"
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	help
+	---help---
+	  This driver supports the IDT VersaClock5 programmable clock
+	  generator.
+
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
 source "drivers/clk/mediatek/Kconfig"

drivers/clk/Makefile

@@ -46,6 +46,7 @@ obj-$(CONFIG_ARCH_TANGO)		+= clk-tango4.o
 obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
 obj-$(CONFIG_ARCH_U300)			+= clk-u300.o
 obj-$(CONFIG_ARCH_VT8500)		+= clk-vt8500.o
+obj-$(CONFIG_COMMON_CLK_VC5)		+= clk-versaclock5.o
 obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o
 obj-$(CONFIG_COMMON_CLK_XGENE)		+= clk-xgene.o