Merge branch 'for-2.6.38' into for-2.6.39

Documentation/sound/alsa/soc/codec.txt

@@ -27,42 +27,38 @@ ASoC Codec driver breakdown
 
 1 - Codec DAI and PCM configuration
 -----------------------------------
-Each codec driver must have a struct snd_soc_codec_dai to define its DAI and
+Each codec driver must have a struct snd_soc_dai_driver to define its DAI and
 PCM capabilities and operations. This struct is exported so that it can be
 registered with the core by your machine driver.
 
 e.g.
 
-struct snd_soc_codec_dai wm8731_dai = {
-	.name = "WM8731",
-	/* playback capabilities */
+static struct snd_soc_dai_ops wm8731_dai_ops = {
+	.prepare	= wm8731_pcm_prepare,
+	.hw_params	= wm8731_hw_params,
+	.shutdown	= wm8731_shutdown,
+	.digital_mute	= wm8731_mute,
+	.set_sysclk	= wm8731_set_dai_sysclk,
+	.set_fmt	= wm8731_set_dai_fmt,
+};
+
+struct snd_soc_dai_driver wm8731_dai = {
+	.name = "wm8731-hifi",
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM8731_RATES,
 		.formats = WM8731_FORMATS,},
-	/* capture capabilities */
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM8731_RATES,
 		.formats = WM8731_FORMATS,},
-	/* pcm operations - see section 4 below */
-	.ops = {
-		.prepare = wm8731_pcm_prepare,
-		.hw_params = wm8731_hw_params,
-		.shutdown = wm8731_shutdown,
-	},
-	/* DAI operations - see DAI.txt */
-	.dai_ops = {
-		.digital_mute = wm8731_mute,
-		.set_sysclk = wm8731_set_dai_sysclk,
-		.set_fmt = wm8731_set_dai_fmt,
-	}
+	.ops = &wm8731_dai_ops,
+	.symmetric_rates = 1,
 };
-EXPORT_SYMBOL_GPL(wm8731_dai);
 
 
 2 - Codec control IO
@@ -186,13 +182,14 @@ when the mute is applied or freed.
 
 i.e.
 
-static int wm8974_mute(struct snd_soc_codec *codec,
-	struct snd_soc_codec_dai *dai, int mute)
+static int wm8974_mute(struct snd_soc_dai *dai, int mute)
 {
-	u16 mute_reg = wm8974_read_reg_cache(codec, WM8974_DAC) & 0xffbf;
-	if(mute)
-		wm8974_write(codec, WM8974_DAC, mute_reg | 0x40);
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = snd_soc_read(codec, WM8974_DAC) & 0xffbf;
+
+	if (mute)
+		snd_soc_write(codec, WM8974_DAC, mute_reg | 0x40);
 	else
-		wm8974_write(codec, WM8974_DAC, mute_reg);
+		snd_soc_write(codec, WM8974_DAC, mute_reg);
 	return 0;
 }

Documentation/sound/alsa/soc/machine.txt

@@ -12,6 +12,8 @@ the following struct:-
 struct snd_soc_card {
 	char *name;
 
+	...
+
 	int (*probe)(struct platform_device *pdev);
 	int (*remove)(struct platform_device *pdev);
 
@@ -22,12 +24,13 @@ struct snd_soc_card {
 	int (*resume_pre)(struct platform_device *pdev);
 	int (*resume_post)(struct platform_device *pdev);
 
-	/* machine stream operations */
-	struct snd_soc_ops *ops;
+	...
 
 	/* CPU <--> Codec DAI links  */
 	struct snd_soc_dai_link *dai_link;
 	int num_links;
+
+	...
 };
 
 probe()/remove()
@@ -42,11 +45,6 @@ of any machine audio tasks that have to be done before or after the codec, DAIs
 and DMA is suspended and resumed. Optional.
 
 
-Machine operations
-------------------
-The machine specific audio operations can be set here. Again this is optional.
-
-
 Machine DAI Configuration
 -------------------------
 The machine DAI configuration glues all the codec and CPU DAIs together. It can
@@ -61,8 +59,10 @@ struct snd_soc_dai_link is used to set up each DAI in your machine. e.g.
 static struct snd_soc_dai_link corgi_dai = {
 	.name = "WM8731",
 	.stream_name = "WM8731",
-	.cpu_dai = &pxa_i2s_dai,
-	.codec_dai = &wm8731_dai,
+	.cpu_dai_name = "pxa-is2-dai",
+	.codec_dai_name = "wm8731-hifi",
+	.platform_name = "pxa-pcm-audio",
+	.codec_name = "wm8713-codec.0-001a",
 	.init = corgi_wm8731_init,
 	.ops = &corgi_ops,
 };
@@ -77,26 +77,6 @@ static struct snd_soc_card snd_soc_corgi = {
 };
 
 
-Machine Audio Subsystem
------------------------
-
-The machine soc device glues the platform, machine and codec driver together.
-Private data can also be set here. e.g.
-
-/* corgi audio private data */
-static struct wm8731_setup_data corgi_wm8731_setup = {
-	.i2c_address = 0x1b,
-};
-
-/* corgi audio subsystem */
-static struct snd_soc_device corgi_snd_devdata = {
-	.machine = &snd_soc_corgi,
-	.platform = &pxa2xx_soc_platform,
-	.codec_dev = &soc_codec_dev_wm8731,
-	.codec_data = &corgi_wm8731_setup,
-};
-
-
 Machine Power Map
 -----------------
 

Documentation/sound/alsa/soc/platform.txt

@@ -20,9 +20,10 @@ struct snd_soc_ops {
 	int (*trigger)(struct snd_pcm_substream *, int);
 };
 
-The platform driver exports its DMA functionality via struct snd_soc_platform:-
+The platform driver exports its DMA functionality via struct
+snd_soc_platform_driver:-
 
-struct snd_soc_platform {
+struct snd_soc_platform_driver {
 	char *name;
 
 	int (*probe)(struct platform_device *pdev);
@@ -34,6 +35,13 @@ struct snd_soc_platform {
 	int (*pcm_new)(struct snd_card *, struct snd_soc_codec_dai *, struct snd_pcm *);
 	void (*pcm_free)(struct snd_pcm *);
 
+	/*
+	 * For platform caused delay reporting.
+	 * Optional.
+	 */
+	snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+
 	/* platform stream ops */
 	struct snd_pcm_ops *pcm_ops;
 };

sound/soc/codecs/Kconfig

@@ -168,6 +168,9 @@ config SND_SOC_L3
 config SND_SOC_DA7210
         tristate
 
+config SND_SOC_DMIC
+	tristate
+
 config SND_SOC_MAX98088
        tristate
 

sound/soc/codecs/Makefile

@@ -14,6 +14,7 @@ snd-soc-cs42l51-objs := cs42l51.o
 snd-soc-cs4270-objs := cs4270.o
 snd-soc-cx20442-objs := cx20442.o
 snd-soc-da7210-objs := da7210.o
+snd-soc-dmic-objs := dmic.o
 snd-soc-l3-objs := l3.o
 snd-soc-max98088-objs := max98088.o
 snd-soc-pcm3008-objs := pcm3008.o
@@ -93,6 +94,7 @@ obj-$(CONFIG_SND_SOC_CS42L51)	+= snd-soc-cs42l51.o
 obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
 obj-$(CONFIG_SND_SOC_CX20442)	+= snd-soc-cx20442.o
 obj-$(CONFIG_SND_SOC_DA7210)	+= snd-soc-da7210.o
+obj-$(CONFIG_SND_SOC_DMIC)	+= snd-soc-dmic.o
 obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
 obj-$(CONFIG_SND_SOC_JZ4740_CODEC)	+= snd-soc-jz4740-codec.o
 obj-$(CONFIG_SND_SOC_MAX98088)	+= snd-soc-max98088.o

sound/soc/codecs/cs4270.c

@@ -106,6 +106,21 @@
 #define CS4270_MUTE_DAC_A	0x01
 #define CS4270_MUTE_DAC_B	0x02
 
+/* Power-on default values for the registers
+ *
+ * This array contains the power-on default values of the registers, with the
+ * exception of the "CHIPID" register (01h).  The lower four bits of that
+ * register contain the hardware revision, so it is treated as volatile.
+ *
+ * Also note that on the CS4270, the first readable register is 1, but ASoC
+ * assumes the first register is 0.  Therfore, the array must have an entry for
+ * register 0, but we use cs4270_reg_is_readable() to tell ASoC that it can't
+ * be read.
+ */
+static const u8 cs4270_default_reg_cache[CS4270_LASTREG + 1] = {
+	0x00, 0x00, 0x00, 0x30, 0x00, 0x60, 0x20, 0x00, 0x00
+};
+
 static const char *supply_names[] = {
 	"va", "vd", "vlc"
 };
@@ -178,6 +193,20 @@ static struct cs4270_mode_ratios cs4270_mode_ratios[] = {
 /* The number of MCLK/LRCK ratios supported by the CS4270 */
 #define NUM_MCLK_RATIOS		ARRAY_SIZE(cs4270_mode_ratios)
 
+static int cs4270_reg_is_readable(unsigned int reg)
+{
+	return (reg >= CS4270_FIRSTREG) && (reg <= CS4270_LASTREG);
+}
+
+static int cs4270_reg_is_volatile(unsigned int reg)
+{
+	/* Unreadable registers are considered volatile */
+	if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG))
+		return 1;
+
+	return reg == CS4270_CHIPID;
+}
+
 /**
  * cs4270_set_dai_sysclk - determine the CS4270 samples rates.
  * @codec_dai: the codec DAI
@@ -262,97 +291,6 @@ static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	return ret;
 }
 
-/**
- * cs4270_fill_cache - pre-fill the CS4270 register cache.
- * @codec: the codec for this CS4270
- *
- * This function fills in the CS4270 register cache by reading the register
- * values from the hardware.
- *
- * This CS4270 registers are cached to avoid excessive I2C I/O operations.
- * After the initial read to pre-fill the cache, the CS4270 never updates
- * the register values, so we won't have a cache coherency problem.
- *
- * We use the auto-increment feature of the CS4270 to read all registers in
- * one shot.
- */
-static int cs4270_fill_cache(struct snd_soc_codec *codec)
-{
-	u8 *cache = codec->reg_cache;
-	struct i2c_client *i2c_client = codec->control_data;
-	s32 length;
-
-	length = i2c_smbus_read_i2c_block_data(i2c_client,
-		CS4270_FIRSTREG | CS4270_I2C_INCR, CS4270_NUMREGS, cache);
-
-	if (length != CS4270_NUMREGS) {
-		dev_err(codec->dev, "i2c read failure, addr=0x%x\n",
-		       i2c_client->addr);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-/**
- * cs4270_read_reg_cache - read from the CS4270 register cache.
- * @codec: the codec for this CS4270
- * @reg: the register to read
- *
- * This function returns the value for a given register.  It reads only from
- * the register cache, not the hardware itself.
- *
- * This CS4270 registers are cached to avoid excessive I2C I/O operations.
- * After the initial read to pre-fill the cache, the CS4270 never updates
- * the register values, so we won't have a cache coherency problem.
- */
-static unsigned int cs4270_read_reg_cache(struct snd_soc_codec *codec,
-	unsigned int reg)
-{
-	u8 *cache = codec->reg_cache;
-
-	if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG))
-		return -EIO;
-
-	return cache[reg - CS4270_FIRSTREG];
-}
-
-/**
- * cs4270_i2c_write - write to a CS4270 register via the I2C bus.
- * @codec: the codec for this CS4270
- * @reg: the register to write
- * @value: the value to write to the register
- *
- * This function writes the given value to the given CS4270 register, and
- * also updates the register cache.
- *
- * Note that we don't use the hw_write function pointer of snd_soc_codec.
- * That's because it's too clunky: the hw_write_t prototype does not match
- * i2c_smbus_write_byte_data(), and it's just another layer of overhead.
- */
-static int cs4270_i2c_write(struct snd_soc_codec *codec, unsigned int reg,
-			    unsigned int value)
-{
-	u8 *cache = codec->reg_cache;
-
-	if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG))
-		return -EIO;
-
-	/* Only perform an I2C operation if the new value is different */
-	if (cache[reg - CS4270_FIRSTREG] != value) {
-		struct i2c_client *client = codec->control_data;
-		if (i2c_smbus_write_byte_data(client, reg, value)) {
-			dev_err(codec->dev, "i2c write failed\n");
-			return -EIO;
-		}
-
-		/* We've written to the hardware, so update the cache */
-		cache[reg - CS4270_FIRSTREG] = value;
-	}
-
-	return 0;
-}
-
 /**
  * cs4270_hw_params - program the CS4270 with the given hardware parameters.
  * @substream: the audio stream
@@ -550,15 +488,16 @@ static struct snd_soc_dai_driver cs4270_dai = {
 static int cs4270_probe(struct snd_soc_codec *codec)
 {
 	struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
-	int i, ret, reg;
+	int i, ret;
 
 	codec->control_data = cs4270->control_data;
 
-	/* The I2C interface is set up, so pre-fill our register cache */
-
-	ret = cs4270_fill_cache(codec);
+	/* Tell ASoC what kind of I/O to use to read the registers.  ASoC will
+	 * then do the I2C transactions itself.
+	 */
+	ret = snd_soc_codec_set_cache_io(codec, 8, 8, cs4270->control_type);
 	if (ret < 0) {
-		dev_err(codec->dev, "failed to fill register cache\n");
+		dev_err(codec->dev, "failed to set cache I/O (ret=%i)\n", ret);
 		return ret;
 	}
 
@@ -567,10 +506,7 @@ static int cs4270_probe(struct snd_soc_codec *codec)
 	 * this feature disabled by default.  An application (e.g. alsactl) can
 	 * re-enabled it by using the controls.
 	 */
-
-	reg = cs4270_read_reg_cache(codec, CS4270_MUTE);
-	reg &= ~CS4270_MUTE_AUTO;
-	ret = cs4270_i2c_write(codec, CS4270_MUTE, reg);
+	ret = snd_soc_update_bits(codec, CS4270_MUTE, CS4270_MUTE_AUTO, 0);
 	if (ret < 0) {
 		dev_err(codec->dev, "i2c write failed\n");
 		return ret;
@@ -581,10 +517,8 @@ static int cs4270_probe(struct snd_soc_codec *codec)
 	 * playback has started.  An application (e.g. alsactl) can
 	 * re-enabled it by using the controls.
 	 */
-
-	reg = cs4270_read_reg_cache(codec, CS4270_TRANS);
-	reg &= ~(CS4270_TRANS_SOFT | CS4270_TRANS_ZERO);
-	ret = cs4270_i2c_write(codec, CS4270_TRANS, reg);
+	ret = snd_soc_update_bits(codec, CS4270_TRANS,
+		CS4270_TRANS_SOFT | CS4270_TRANS_ZERO, 0);
 	if (ret < 0) {
 		dev_err(codec->dev, "i2c write failed\n");
 		return ret;
@@ -707,15 +641,16 @@ static int cs4270_soc_resume(struct snd_soc_codec *codec)
  * Assign this variable to the codec_dev field of the machine driver's
  * snd_soc_device structure.
  */
-static struct snd_soc_codec_driver soc_codec_device_cs4270 = {
-	.probe =	cs4270_probe,
-	.remove =	cs4270_remove,
-	.suspend =	cs4270_soc_suspend,
-	.resume =	cs4270_soc_resume,
-	.read = cs4270_read_reg_cache,
-	.write = cs4270_i2c_write,
-	.reg_cache_size = CS4270_NUMREGS,
-	.reg_word_size = sizeof(u8),
+static const struct snd_soc_codec_driver soc_codec_device_cs4270 = {
+	.probe =		cs4270_probe,
+	.remove =		cs4270_remove,
+	.suspend =		cs4270_soc_suspend,
+	.resume =		cs4270_soc_resume,
+	.volatile_register =	cs4270_reg_is_volatile,
+	.readable_register =	cs4270_reg_is_readable,
+	.reg_cache_size =	CS4270_LASTREG + 1,
+	.reg_word_size =	sizeof(u8),
+	.reg_cache_default =	cs4270_default_reg_cache,
 };
 
 /**

sound/soc/codecs/dmic.c

+/*
+ * dmic.c  --  SoC audio for Generic Digital MICs
+ *
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+static struct snd_soc_dai_driver dmic_dai = {
+	.name = "dmic-hifi",
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 8,
+		.rates = SNDRV_PCM_RATE_CONTINUOUS,
+		.formats = SNDRV_PCM_FMTBIT_S32_LE
+			| SNDRV_PCM_FMTBIT_S24_LE
+			| SNDRV_PCM_FMTBIT_S16_LE,
+	},
+};
+
+static struct snd_soc_codec_driver soc_dmic = {};
+
+static int __devinit dmic_dev_probe(struct platform_device *pdev)
+{
+	return snd_soc_register_codec(&pdev->dev,
+			&soc_dmic, &dmic_dai, 1);
+}
+
+static int __devexit dmic_dev_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_codec(&pdev->dev);
+	return 0;
+}
+
+MODULE_ALIAS("platform:dmic-codec");
+
+static struct platform_driver dmic_driver = {
+	.driver = {
+		.name = "dmic-codec",
+		.owner = THIS_MODULE,
+	},
+	.probe = dmic_dev_probe,
+	.remove = __devexit_p(dmic_dev_remove),
+};
+
+static int __init dmic_init(void)
+{
+	return platform_driver_register(&dmic_driver);
+}
+module_init(dmic_init);
+
+static void __exit dmic_exit(void)
+{
+	platform_driver_unregister(&dmic_driver);
+}
+module_exit(dmic_exit);
+
+MODULE_DESCRIPTION("Generic DMIC driver");
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
+MODULE_LICENSE("GPL");

sound/soc/codecs/tpa6130a2.c

@@ -339,7 +339,6 @@ EXPORT_SYMBOL_GPL(tpa6130a2_stereo_enable);
 int tpa6130a2_add_controls(struct snd_soc_codec *codec)
 {
 	struct	tpa6130a2_data *data;
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
 
 	if (tpa6130a2_client == NULL)
 		return -ENODEV;

sound/soc/codecs/twl6040.c

@@ -1138,19 +1138,19 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 			SND_SOC_NOPM, 0, 0, &hsr_mux_controls),
 
 	/* Analog playback drivers */
-	SND_SOC_DAPM_PGA_E("Handsfree Left Driver",
+	SND_SOC_DAPM_OUT_DRV_E("Handsfree Left Driver",
 			TWL6040_REG_HFLCTL, 4, 0, NULL, 0,
 			pga_event,
 			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
-	SND_SOC_DAPM_PGA_E("Handsfree Right Driver",
+	SND_SOC_DAPM_OUT_DRV_E("Handsfree Right Driver",
 			TWL6040_REG_HFRCTL, 4, 0, NULL, 0,
 			pga_event,
 			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
-	SND_SOC_DAPM_PGA_E("Headset Left Driver",
+	SND_SOC_DAPM_OUT_DRV_E("Headset Left Driver",
 			TWL6040_REG_HSLCTL, 2, 0, NULL, 0,
 			pga_event,
 			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
-	SND_SOC_DAPM_PGA_E("Headset Right Driver",
+	SND_SOC_DAPM_OUT_DRV_E("Headset Right Driver",
 			TWL6040_REG_HSRCTL, 2, 0, NULL, 0,
 			pga_event,
 			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),

sound/soc/codecs/wm8995.c

@@ -30,7 +30,7 @@
 
 #include "wm8995.h"
 
-static const u16 wm8995_reg_defs[WM8995_MAX_REGISTER + 1] __devinitconst = {
+static const u16 wm8995_reg_defs[WM8995_MAX_REGISTER + 1] = {
 	[0]     = 0x8995, [5]     = 0x0100, [16]    = 0x000b, [17]    = 0x000b,
 	[24]    = 0x02c0, [25]    = 0x02c0, [26]    = 0x02c0, [27]    = 0x02c0,
 	[28]    = 0x000f, [32]    = 0x0005, [33]    = 0x0005, [40]    = 0x0003,

sound/soc/omap/omap-mcbsp.c

@@ -102,6 +102,17 @@ static const int omap24xx_dma_reqs[][2] = {
 static const int omap24xx_dma_reqs[][2] = {};
 #endif
 
+#if defined(CONFIG_ARCH_OMAP4)
+static const int omap44xx_dma_reqs[][2] = {
+	{ OMAP44XX_DMA_MCBSP1_TX, OMAP44XX_DMA_MCBSP1_RX },
+	{ OMAP44XX_DMA_MCBSP2_TX, OMAP44XX_DMA_MCBSP2_RX },
+	{ OMAP44XX_DMA_MCBSP3_TX, OMAP44XX_DMA_MCBSP3_RX },
+	{ OMAP44XX_DMA_MCBSP4_TX, OMAP44XX_DMA_MCBSP4_RX },
+};
+#else
+static const int omap44xx_dma_reqs[][2] = {};
+#endif
+
 #if defined(CONFIG_ARCH_OMAP2420)
 static const unsigned long omap2420_mcbsp_port[][2] = {
 	{ OMAP24XX_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1,
@@ -147,6 +158,21 @@ static const unsigned long omap34xx_mcbsp_port[][2] = {
 static const unsigned long omap34xx_mcbsp_port[][2] = {};
 #endif
 
+#if defined(CONFIG_ARCH_OMAP4)
+static const unsigned long omap44xx_mcbsp_port[][2] = {
+	{ OMAP44XX_MCBSP1_BASE + OMAP_MCBSP_REG_DXR,
+	  OMAP44XX_MCBSP1_BASE + OMAP_MCBSP_REG_DRR },
+	{ OMAP44XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR,
+	  OMAP44XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR },
+	{ OMAP44XX_MCBSP3_BASE + OMAP_MCBSP_REG_DXR,
+	  OMAP44XX_MCBSP3_BASE + OMAP_MCBSP_REG_DRR },
+	{ OMAP44XX_MCBSP4_BASE + OMAP_MCBSP_REG_DXR,
+	  OMAP44XX_MCBSP4_BASE + OMAP_MCBSP_REG_DRR },
+};
+#else
+static const unsigned long omap44xx_mcbsp_port[][2] = {};
+#endif
+
 static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
@@ -224,7 +250,7 @@ static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
 	 * 2 channels (stereo): size is 128 / 2 = 64 frames (2 * 64 words)
 	 * 4 channels: size is 128 / 4 = 32 frames (4 * 32 words)
 	 */
-	if (cpu_is_omap343x()) {
+	if (cpu_is_omap343x() || cpu_is_omap44xx()) {
 		/*
 		* Rule for the buffer size. We should not allow
 		* smaller buffer than the FIFO size to avoid underruns
@@ -332,6 +358,9 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
 	} else if (cpu_is_omap343x()) {
 		dma = omap24xx_dma_reqs[bus_id][substream->stream];
 		port = omap34xx_mcbsp_port[bus_id][substream->stream];
+	 } else if (cpu_is_omap44xx()) {
+		dma = omap44xx_dma_reqs[bus_id][substream->stream];
+		port = omap44xx_mcbsp_port[bus_id][substream->stream];
 	} else {
 		return -ENODEV;
 	}
@@ -498,11 +527,11 @@ static int omap_mcbsp_dai_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 	regs->spcr2	|= XINTM(3) | FREE;
 	regs->spcr1	|= RINTM(3);
 	/* RFIG and XFIG are not defined in 34xx */
-	if (!cpu_is_omap34xx()) {
+	if (!cpu_is_omap34xx() && !cpu_is_omap44xx()) {
 		regs->rcr2	|= RFIG;
 		regs->xcr2	|= XFIG;
 	}
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		regs->xccr = DXENDLY(1) | XDMAEN | XDISABLE;
 		regs->rccr = RFULL_CYCLE | RDMAEN | RDISABLE;
 	}

sound/soc/omap/omap-mcbsp.h

@@ -50,6 +50,10 @@ enum omap_mcbsp_div {
 #undef  NUM_LINKS
 #define NUM_LINKS	3
 #endif
+#if defined(CONFIG_ARCH_OMAP4)
+#undef  NUM_LINKS
+#define NUM_LINKS	4
+#endif
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
 #undef  NUM_LINKS
 #define NUM_LINKS	5

sound/soc/samsung/rx1950_uda1380.c

@@ -235,6 +235,7 @@ static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd)
 
 	snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
 	snd_soc_dapm_enable_pin(dapm, "Speaker");
+	snd_soc_dapm_enable_pin(dapm, "Mic Jack");
 
 	snd_soc_dapm_sync(dapm);
 

sound/soc/sh/migor.c

@@ -8,11 +8,11 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/clkdev.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
 #include <linux/module.h>
 
-#include <asm/clkdev.h>
 #include <asm/clock.h>
 
 #include <cpu/sh7722.h>

sound/soc/soc-cache.c

@@ -1339,7 +1339,7 @@ static int snd_soc_lzo_cache_init(struct snd_soc_codec *codec)
 			goto err;
 		}
 		lzo_blocks[i]->sync_bmp = sync_bmp;
-		lzo_blocks[i]->sync_bmp_nbits = reg_size;
+		lzo_blocks[i]->sync_bmp_nbits = bmp_size;
 		/* alloc the working space for the compressed block */
 		ret = snd_soc_lzo_prepare(lzo_blocks[i]);
 		if (ret < 0)