Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2016-09-23

This series contains updates to ixgbe and ixgbevf.

Emil provides several changes, first simplifies the logic for setting VLAN
filtering by checking the VMDQ flag and the old 82598 MAC, instead of
having to maintain a list of MAC types.  Then made two functions static
that are used only within the file, a by-product is sparse is now happy.
Added spinlocks to make sure that the MTU configuration is handled
properly.  Fixed an issue where when SR-IOV is enabled while the
ixgbevf driver is loaded would result in all mailbox requests being
rejected by ixgbe, so call ixgbe_sriov_reinit() before pci_enable_sriov()
to ensure mailbox requests are properly handled.

Mark resolves a NULL pointer issue by simply setting the read and write
*_ref_mdi pointers for x550em_a devices.  Then clearly indicates within
ethtool that all MACs support pause frames and made sure that the
advertising is set to the requested mode.  Fixed an issue where
MDIO_PRTAD_NONE was not being used consistently to indicate no PHY
address.

Alex fixes an issue, where the support for multiple queues when SR-IOV
is enabled was added but the support was not reported.  With that, fix
an issue where the hardware redirection table could support more queues
then the PF currently has when SR-IOV is enabled, so use the RSS mask to
trim off the bits that are not used.  Lastly, instead of limiting the
VFs if we do not use 4 queues for RSS in the PF, we can instead just limit
the RSS queues used to a power of 2.  We can now support use cases where
VFs are using more queues than the PF is currently using and can support
RSS if so desired.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c

@@ -313,6 +313,25 @@ static int ixgbe_get_settings(struct net_device *netdev,
 		break;
 	}
 
+	/* Indicate pause support */
+	ecmd->supported |= SUPPORTED_Pause;
+
+	switch (hw->fc.requested_mode) {
+	case ixgbe_fc_full:
+		ecmd->advertising |= ADVERTISED_Pause;
+		break;
+	case ixgbe_fc_rx_pause:
+		ecmd->advertising |= ADVERTISED_Pause |
+				     ADVERTISED_Asym_Pause;
+		break;
+	case ixgbe_fc_tx_pause:
+		ecmd->advertising |= ADVERTISED_Asym_Pause;
+		break;
+	default:
+		ecmd->advertising &= ~(ADVERTISED_Pause |
+				       ADVERTISED_Asym_Pause);
+	}
+
 	if (netif_carrier_ok(netdev)) {
 		switch (adapter->link_speed) {
 		case IXGBE_LINK_SPEED_10GB_FULL:
@@ -2928,9 +2947,13 @@ static u32 ixgbe_rss_indir_size(struct net_device *netdev)
 static void ixgbe_get_reta(struct ixgbe_adapter *adapter, u32 *indir)
 {
 	int i, reta_size = ixgbe_rss_indir_tbl_entries(adapter);
+	u16 rss_m = adapter->ring_feature[RING_F_RSS].mask;
+
+	if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+		rss_m = adapter->ring_feature[RING_F_RSS].indices - 1;
 
 	for (i = 0; i < reta_size; i++)
-		indir[i] = adapter->rss_indir_tbl[i];
+		indir[i] = adapter->rss_indir_tbl[i] & rss_m;
 }
 
 static int ixgbe_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
@@ -3041,8 +3064,8 @@ static unsigned int ixgbe_max_channels(struct ixgbe_adapter *adapter)
 		/* We only support one q_vector without MSI-X */
 		max_combined = 1;
 	} else if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
-		/* SR-IOV currently only allows one queue on the PF */
-		max_combined = 1;
+		/* Limit value based on the queue mask */
+		max_combined = adapter->ring_feature[RING_F_RSS].mask + 1;
 	} else if (tcs > 1) {
 		/* For DCB report channels per traffic class */
 		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {

drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c

@@ -515,15 +515,16 @@ static bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter)
 	vmdq_i = min_t(u16, IXGBE_MAX_VMDQ_INDICES, vmdq_i);
 
 	/* 64 pool mode with 2 queues per pool */
-	if ((vmdq_i > 32) || (rss_i < 4) || (vmdq_i > 16 && pools)) {
+	if ((vmdq_i > 32) || (vmdq_i > 16 && pools)) {
 		vmdq_m = IXGBE_82599_VMDQ_2Q_MASK;
 		rss_m = IXGBE_RSS_2Q_MASK;
 		rss_i = min_t(u16, rss_i, 2);
-	/* 32 pool mode with 4 queues per pool */
+	/* 32 pool mode with up to 4 queues per pool */
 	} else {
 		vmdq_m = IXGBE_82599_VMDQ_4Q_MASK;
 		rss_m = IXGBE_RSS_4Q_MASK;
-		rss_i = 4;
+		/* We can support 4, 2, or 1 queues */
+		rss_i = (rss_i > 3) ? 4 : (rss_i > 1) ? 2 : 1;
 	}
 
 #ifdef IXGBE_FCOE

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -3248,7 +3248,8 @@ static void ixgbe_setup_mtqc(struct ixgbe_adapter *adapter)
 			mtqc |= IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ;
 		else if (tcs > 1)
 			mtqc |= IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ;
-		else if (adapter->ring_feature[RING_F_RSS].indices == 4)
+		else if (adapter->ring_feature[RING_F_VMDQ].mask ==
+			 IXGBE_82599_VMDQ_4Q_MASK)
 			mtqc |= IXGBE_MTQC_32VF;
 		else
 			mtqc |= IXGBE_MTQC_64VF;
@@ -3475,12 +3476,12 @@ static void ixgbe_setup_reta(struct ixgbe_adapter *adapter)
 	u32 reta_entries = ixgbe_rss_indir_tbl_entries(adapter);
 	u16 rss_i = adapter->ring_feature[RING_F_RSS].indices;
 
-	/* Program table for at least 2 queues w/ SR-IOV so that VFs can
+	/* Program table for at least 4 queues w/ SR-IOV so that VFs can
 	 * make full use of any rings they may have.  We will use the
 	 * PSRTYPE register to control how many rings we use within the PF.
 	 */
-	if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && (rss_i < 2))
-		rss_i = 2;
+	if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && (rss_i < 4))
+		rss_i = 4;
 
 	/* Fill out hash function seeds */
 	for (i = 0; i < 10; i++)
@@ -3544,7 +3545,8 @@ static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
 				mrqc = IXGBE_MRQC_VMDQRT8TCEN;	/* 8 TCs */
 			else if (tcs > 1)
 				mrqc = IXGBE_MRQC_VMDQRT4TCEN;	/* 4 TCs */
-			else if (adapter->ring_feature[RING_F_RSS].indices == 4)
+			else if (adapter->ring_feature[RING_F_VMDQ].mask ==
+				 IXGBE_82599_VMDQ_4Q_MASK)
 				mrqc = IXGBE_MRQC_VMDQRSS32EN;
 			else
 				mrqc = IXGBE_MRQC_VMDQRSS64EN;
@@ -4105,23 +4107,20 @@ static void ixgbe_vlan_promisc_enable(struct ixgbe_adapter *adapter)
 
 	vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
 
-	switch (hw->mac.type) {
-	case ixgbe_mac_82599EB:
-	case ixgbe_mac_X540:
-	case ixgbe_mac_X550:
-	case ixgbe_mac_X550EM_x:
-	case ixgbe_mac_x550em_a:
-	default:
-		if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED)
-			break;
-		/* fall through */
-	case ixgbe_mac_82598EB:
-		/* legacy case, we can just disable VLAN filtering */
+	if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) {
+	/* For VMDq and SR-IOV we must leave VLAN filtering enabled */
+		vlnctrl |= IXGBE_VLNCTRL_VFE;
+		IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
+	} else {
 		vlnctrl &= ~IXGBE_VLNCTRL_VFE;
 		IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 		return;
 	}
 
+	/* Nothing to do for 82598 */
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return;
+
 	/* We are already in VLAN promisc, nothing to do */
 	if (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)
 		return;
@@ -4129,10 +4128,6 @@ static void ixgbe_vlan_promisc_enable(struct ixgbe_adapter *adapter)
 	/* Set flag so we don't redo unnecessary work */
 	adapter->flags2 |= IXGBE_FLAG2_VLAN_PROMISC;
 
-	/* For VMDq and SR-IOV we must leave VLAN filtering enabled */
-	vlnctrl |= IXGBE_VLNCTRL_VFE;
-	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
-
 	/* Add PF to all active pools */
 	for (i = IXGBE_VLVF_ENTRIES; --i;) {
 		u32 reg_offset = IXGBE_VLVFB(i * 2 + VMDQ_P(0) / 32);
@@ -4204,19 +4199,9 @@ static void ixgbe_vlan_promisc_disable(struct ixgbe_adapter *adapter)
 	vlnctrl |= IXGBE_VLNCTRL_VFE;
 	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 
-	switch (hw->mac.type) {
-	case ixgbe_mac_82599EB:
-	case ixgbe_mac_X540:
-	case ixgbe_mac_X550:
-	case ixgbe_mac_X550EM_x:
-	case ixgbe_mac_x550em_a:
-	default:
-		if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED)
-			break;
-		/* fall through */
-	case ixgbe_mac_82598EB:
+	if (!(adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) ||
+	    hw->mac.type == ixgbe_mac_82598EB)
 		return;
-	}
 
 	/* We are not in VLAN promisc, nothing to do */
 	if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC))

drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c

@@ -346,8 +346,8 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 				return 0;
 			}
 		}
-		/* clear value if nothing found */
-		hw->phy.mdio.prtad = 0;
+		/* indicate no PHY found */
+		hw->phy.mdio.prtad = MDIO_PRTAD_NONE;
 		return IXGBE_ERR_PHY_ADDR_INVALID;
 	}
 	return 0;

drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c

@@ -329,13 +329,15 @@ static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs)
 	for (i = 0; i < adapter->num_vfs; i++)
 		ixgbe_vf_configuration(dev, (i | 0x10000000));
 
+	/* reset before enabling SRIOV to avoid mailbox issues */
+	ixgbe_sriov_reinit(adapter);
+
 	err = pci_enable_sriov(dev, num_vfs);
 	if (err) {
 		e_dev_warn("Failed to enable PCI sriov: %d\n", err);
 		return err;
 	}
 	ixgbe_get_vfs(adapter);
-	ixgbe_sriov_reinit(adapter);
 
 	return num_vfs;
 #else

drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c

@@ -1459,7 +1459,7 @@ ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
 	/* Configure internal PHY for KR/KX. */
 	ixgbe_setup_kr_speed_x550em(hw, speed);
 
-	if (!hw->phy.mdio.prtad || hw->phy.mdio.prtad == 0xFFFF)
+	if (hw->phy.mdio.prtad == MDIO_PRTAD_NONE)
 		return IXGBE_ERR_PHY_ADDR_INVALID;
 
 	/* Get external PHY device id */
@@ -2125,7 +2125,7 @@ static s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
  *  @hw: pointer to hardware structure
  *  @led_idx: led number to turn on
  **/
-s32 ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
+static s32 ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
 {
 	u16 phy_data;
 
@@ -2147,7 +2147,7 @@ s32 ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
  *  @hw: pointer to hardware structure
  *  @led_idx: led number to turn off
  **/
-s32 ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
+static s32 ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
 {
 	u16 phy_data;
 
@@ -3049,6 +3049,8 @@ static const struct ixgbe_phy_operations phy_ops_x550em_a = {
 	.identify		= &ixgbe_identify_phy_x550em,
 	.read_reg		= &ixgbe_read_phy_reg_x550a,
 	.write_reg		= &ixgbe_write_phy_reg_x550a,
+	.read_reg_mdi		= &ixgbe_read_phy_reg_mdi,
+	.write_reg_mdi		= &ixgbe_write_phy_reg_mdi,
 };
 
 static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = {

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

@@ -1810,8 +1810,10 @@ static void ixgbevf_configure_rx(struct ixgbevf_adapter *adapter)
 	if (hw->mac.type >= ixgbe_mac_X550_vf)
 		ixgbevf_setup_vfmrqc(adapter);
 
+	spin_lock_bh(&adapter->mbx_lock);
 	/* notify the PF of our intent to use this size of frame */
 	ret = hw->mac.ops.set_rlpml(hw, netdev->mtu + ETH_HLEN + ETH_FCS_LEN);
+	spin_unlock_bh(&adapter->mbx_lock);
 	if (ret)
 		dev_err(&adapter->pdev->dev,
 			"Failed to set MTU at %d\n", netdev->mtu);
@@ -3758,8 +3760,10 @@ static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu)
 	if ((new_mtu < 68) || (max_frame > max_possible_frame))
 		return -EINVAL;
 
+	spin_lock_bh(&adapter->mbx_lock);
 	/* notify the PF of our intent to use this size of frame */
 	ret = hw->mac.ops.set_rlpml(hw, max_frame);
+	spin_unlock_bh(&adapter->mbx_lock);
 	if (ret)
 		return -EINVAL;