[POWERPC] Add DTS file for the Motorola PrPMC2800 platform

Add the device tree source file for the prpmc2800 line of processor PMCs.
Several of the property values are updated by the bootwrapper but sane
defaults have been chosen in case the bootwrapper can't determine the
exact processor board variant.  The defaults should allow the kernel
to boot despite having non-optimal device tree property values.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/boot/dts/prpmc2800.dts

+/* Device Tree Source for Motorola PrPMC2800
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2007 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Property values that are labeled as "Default" will be updated by bootwrapper
+ * if it can determine the exact PrPMC type.
+ *
+ * To build:
+ *   dtc -I dts -O asm -o prpmc2800.S -b 0 prpmc2800.dts
+ *   dtc -I dts -O dtb -o prpmc2800.dtb -b 0 prpmc2800.dts
+ */
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "PrPMC280/PrPMC2800"; /* Default */
+	compatible = "motorola,PrPMC2800";
+	coherency-off;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,7447 {
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <2bb0b140>;	/* Default (733 MHz) */
+			bus-frequency = <7f28155>;	/* 133.333333 MHz */
+			timebase-frequency = <1fca055>;	/* 33.333333 MHz */
+			i-cache-line-size = <20>;
+			d-cache-line-size = <20>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 20000000>;	/* Default (512MB) */
+	};
+
+	mv64x60@f1000000 { /* Marvell Discovery */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <1>;
+		model = "mv64360";			/* Default */
+		compatible = "marvell,mv64x60";
+		clock-frequency = <7f28155>;		/* 133.333333 MHz */
+		reg = <f1000000 00010000>;
+		virtual-reg = <f1000000>;
+		ranges = <88000000 88000000 01000000	/* PCI 0 I/O Space */
+			  80000000 80000000 08000000	/* PCI 0 MEM Space */
+			  a0000000 a0000000 04000000	/* User FLASH */
+			  00000000 f1000000 00010000	/* Bridge's regs */
+			  f2000000 f2000000 00040000>;	/* Integrated SRAM */
+
+		flash@a0000000 {
+			device_type = "rom";
+			compatible = "direct-mapped";
+			reg = <a0000000 4000000>; /* Default (64MB) */
+			probe-type = "CFI";
+			bank-width = <4>;
+			partitions = <00000000 00100000 /* RO */
+				      00100000 00040001 /* RW */
+				      00140000 00400000 /* RO */
+				      00540000 039c0000 /* RO */
+				      03f00000 00100000>; /* RO */
+			partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "marvell,mv64x60-mdio";
+			ethernet-phy@1 {
+				device_type = "ethernet-phy";
+				compatible = "broadcom,bcm5421";
+				interrupts = <4c>;	/* GPP 12 */
+				interrupt-parent = <&/mv64x60/pic>;
+				reg = <1>;
+			};
+			ethernet-phy@3 {
+				device_type = "ethernet-phy";
+				compatible = "broadcom,bcm5421";
+				interrupts = <4c>;	/* GPP 12 */
+				interrupt-parent = <&/mv64x60/pic>;
+				reg = <3>;
+			};
+		};
+
+		ethernet@2000 {
+			reg = <2000 2000>;
+			eth0 {
+				device_type = "network";
+				compatible = "marvell,mv64x60-eth";
+				block-index = <0>;
+				interrupts = <20>;
+				interrupt-parent = <&/mv64x60/pic>;
+				phy = <&/mv64x60/mdio/ethernet-phy@1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+			eth1 {
+				device_type = "network";
+				compatible = "marvell,mv64x60-eth";
+				block-index = <1>;
+				interrupts = <21>;
+				interrupt-parent = <&/mv64x60/pic>;
+				phy = <&/mv64x60/mdio/ethernet-phy@3>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+
+		sdma@4000 {
+			device_type = "dma";
+			compatible = "marvell,mv64x60-sdma";
+			reg = <4000 c18>;
+			virtual-reg = <f1004000>;
+			interrupt-base = <0>;
+			interrupts = <24>;
+			interrupt-parent = <&/mv64x60/pic>;
+		};
+
+		sdma@6000 {
+			device_type = "dma";
+			compatible = "marvell,mv64x60-sdma";
+			reg = <6000 c18>;
+			virtual-reg = <f1006000>;
+			interrupt-base = <0>;
+			interrupts = <26>;
+			interrupt-parent = <&/mv64x60/pic>;
+		};
+
+		brg@b200 {
+			compatible = "marvell,mv64x60-brg";
+			reg = <b200 8>;
+			clock-src = <8>;
+			clock-frequency = <7ed6b40>;
+			current-speed = <2580>;
+			bcr = <0>;
+		};
+
+		brg@b208 {
+			compatible = "marvell,mv64x60-brg";
+			reg = <b208 8>;
+			clock-src = <8>;
+			clock-frequency = <7ed6b40>;
+			current-speed = <2580>;
+			bcr = <0>;
+		};
+
+		cunit@f200 {
+			reg = <f200 200>;
+		};
+
+		mpscrouting@b400 {
+			reg = <b400 c>;
+		};
+
+		mpscintr@b800 {
+			reg = <b800 100>;
+			virtual-reg = <f100b800>;
+		};
+
+		mpsc@8000 {
+			device_type = "serial";
+			compatible = "marvell,mpsc";
+			reg = <8000 38>;
+			virtual-reg = <f1008000>;
+			sdma = <&/mv64x60/sdma@4000>;
+			brg = <&/mv64x60/brg@b200>;
+			cunit = <&/mv64x60/cunit@f200>;
+			mpscrouting = <&/mv64x60/mpscrouting@b400>;
+			mpscintr = <&/mv64x60/mpscintr@b800>;
+			block-index = <0>;
+			max_idle = <28>;
+			chr_1 = <0>;
+			chr_2 = <0>;
+			chr_10 = <3>;
+			mpcr = <0>;
+			interrupts = <28>;
+			interrupt-parent = <&/mv64x60/pic>;
+		};
+
+		mpsc@9000 {
+			device_type = "serial";
+			compatible = "marvell,mpsc";
+			reg = <9000 38>;
+			virtual-reg = <f1009000>;
+			sdma = <&/mv64x60/sdma@6000>;
+			brg = <&/mv64x60/brg@b208>;
+			cunit = <&/mv64x60/cunit@f200>;
+			mpscrouting = <&/mv64x60/mpscrouting@b400>;
+			mpscintr = <&/mv64x60/mpscintr@b800>;
+			block-index = <1>;
+			max_idle = <28>;
+			chr_1 = <0>;
+			chr_2 = <0>;
+			chr_10 = <3>;
+			mpcr = <0>;
+			interrupts = <2a>;
+			interrupt-parent = <&/mv64x60/pic>;
+		};
+
+		i2c@c000 {
+			device_type = "i2c";
+			compatible = "marvell,mv64x60-i2c";
+			reg = <c000 20>;
+			virtual-reg = <f100c000>;
+			freq_m = <8>;
+			freq_n = <3>;
+			timeout = <3e8>;		/* 1000 = 1 second */
+			retries = <1>;
+			interrupts = <25>;
+			interrupt-parent = <&/mv64x60/pic>;
+		};
+
+		pic {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "marvell,mv64x60-pic";
+			reg = <0000 88>;
+			interrupt-controller;
+		};
+
+		mpp@f000 {
+			compatible = "marvell,mv64x60-mpp";
+			reg = <f000 10>;
+		};
+
+		gpp@f100 {
+			compatible = "marvell,mv64x60-gpp";
+			reg = <f100 20>;
+		};
+
+		pci@80000000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "marvell,mv64x60-pci";
+			reg = <0cf8 8>;
+			ranges = <01000000 0        0 88000000 0 01000000
+				  02000000 0 80000000 80000000 0 08000000>;
+			bus-range = <0 ff>;
+			clock-frequency = <3EF1480>;
+			interrupt-pci-iack = <0c34>;
+			interrupt-parent = <&/mv64x60/pic>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x0a */
+				5000 0 0 1 &/mv64x60/pic 50
+				5000 0 0 2 &/mv64x60/pic 51
+				5000 0 0 3 &/mv64x60/pic 5b
+				5000 0 0 4 &/mv64x60/pic 5d
+
+				/* IDSEL 0x0b */
+				5800 0 0 1 &/mv64x60/pic 5b
+				5800 0 0 2 &/mv64x60/pic 5d
+				5800 0 0 3 &/mv64x60/pic 50
+				5800 0 0 4 &/mv64x60/pic 51
+
+				/* IDSEL 0x0c */
+				6000 0 0 1 &/mv64x60/pic 5b
+				6000 0 0 2 &/mv64x60/pic 5d
+				6000 0 0 3 &/mv64x60/pic 50
+				6000 0 0 4 &/mv64x60/pic 51
+
+				/* IDSEL 0x0d */
+				6800 0 0 1 &/mv64x60/pic 5d
+				6800 0 0 2 &/mv64x60/pic 50
+				6800 0 0 3 &/mv64x60/pic 51
+				6800 0 0 4 &/mv64x60/pic 5b
+			>;
+		};
+
+		cpu-error@0070 {
+			compatible = "marvell,mv64x60-cpu-error";
+			reg = <0070 10 0128 28>;
+			interrupts = <03>;
+			interrupt-parent = <&/mv64x60/pic>;
+		};
+
+		sram-ctrl@0380 {
+			compatible = "marvell,mv64x60-sram-ctrl";
+			reg = <0380 80>;
+			interrupts = <0d>;
+			interrupt-parent = <&/mv64x60/pic>;
+		};
+
+		pci-error@1d40 {
+			compatible = "marvell,mv64x60-pci-error";
+			reg = <1d40 40 0c28 4>;
+			interrupts = <0c>;
+			interrupt-parent = <&/mv64x60/pic>;
+		};
+
+		mem-ctrl@1400 {
+			compatible = "marvell,mv64x60-mem-ctrl";
+			reg = <1400 60>;
+			interrupts = <11>;
+			interrupt-parent = <&/mv64x60/pic>;
+		};
+	};
+
+	chosen {
+		bootargs = "ip=on console=ttyMM0";
+		linux,stdout-path = "/mv64x60@f1000000/mpsc@8000";
+	};
+};