Commit 3f639ee8 authored by Stephen Rothwell's avatar Stephen Rothwell

[POWERPC] implement BEGIN/END_FW_FTR_SECTION

and use it an all the obvious places in assembler code.
Signed-off-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
parent fc246c38
......@@ -27,10 +27,7 @@
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#ifdef CONFIG_PPC_ISERIES
#define DO_SOFT_DISABLE
#endif
#include <asm/firmware.h>
/*
* System calls.
......@@ -91,6 +88,7 @@ system_call_common:
ld r11,exception_marker@toc(r2)
std r11,-16(r9) /* "regshere" marker */
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
/* Hack for handling interrupts when soft-enabling on iSeries */
cmpdi cr1,r0,0x5555 /* syscall 0x5555 */
andi. r10,r12,MSR_PR /* from kernel */
......@@ -98,6 +96,7 @@ system_call_common:
beq hardware_interrupt_entry
lbz r10,PACAPROCENABLED(r13)
std r10,SOFTE(r1)
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
mfmsr r11
ori r11,r11,MSR_EE
......@@ -462,6 +461,7 @@ _GLOBAL(ret_from_except_lite)
restore:
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
ld r5,SOFTE(r1)
cmpdi 0,r5,0
beq 4f
......@@ -480,6 +480,7 @@ restore:
b .ret_from_except_lite /* loop back and handle more */
4: stb r5,PACAPROCENABLED(r13)
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
ld r3,_MSR(r1)
......@@ -538,18 +539,23 @@ do_work:
lwz r8,TI_PREEMPT(r9)
cmpwi cr1,r8,0
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
ld r0,SOFTE(r1)
cmpdi r0,0
#else
andi. r0,r3,MSR_EE
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
BEGIN_FW_FTR_SECTION
andi. r0,r3,MSR_EE
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
crandc eq,cr1*4+eq,eq
bne restore
/* here we are preempting the current task */
1:
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
li r0,1
stb r0,PACAPROCENABLED(r13)
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
ori r10,r10,MSR_EE
mtmsrd r10,1 /* reenable interrupts */
......
......@@ -33,6 +33,7 @@
#include <asm/hvcall.h>
#include <asm/iseries/lpar_map.h>
#include <asm/thread_info.h>
#include <asm/firmware.h>
#ifdef CONFIG_PPC_ISERIES
#define DO_SOFT_DISABLE
......@@ -365,19 +366,28 @@ label##_iSeries: \
#ifdef DO_SOFT_DISABLE
#define DISABLE_INTS \
BEGIN_FW_FTR_SECTION; \
lbz r10,PACAPROCENABLED(r13); \
li r11,0; \
std r10,SOFTE(r1); \
mfmsr r10; \
stb r11,PACAPROCENABLED(r13); \
ori r10,r10,MSR_EE; \
mtmsrd r10,1
mtmsrd r10,1; \
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#define ENABLE_INTS \
BEGIN_FW_FTR_SECTION; \
lbz r10,PACAPROCENABLED(r13); \
mfmsr r11; \
std r10,SOFTE(r1); \
ori r11,r11,MSR_EE; \
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES); \
BEGIN_FW_FTR_SECTION; \
ld r12,_MSR(r1); \
mfmsr r11; \
rlwimi r11,r12,0,MSR_EE; \
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \
mtmsrd r11,1
#else /* hard enable/disable interrupts */
......@@ -1071,8 +1081,10 @@ _GLOBAL(slb_miss_realmode)
ld r3,PACA_EXSLB+EX_R3(r13)
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
ld r11,PACALPPACAPTR(r13)
ld r11,LPPACASRR0(r11) /* get SRR0 value */
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
mtlr r10
......@@ -1087,8 +1099,10 @@ _GLOBAL(slb_miss_realmode)
.machine pop
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
......@@ -1301,6 +1315,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
cmpdi r3,0 /* see if hash_page succeeded */
#ifdef DO_SOFT_DISABLE
BEGIN_FW_FTR_SECTION
/*
* If we had interrupts soft-enabled at the point where the
* DSI/ISI occurred, and an interrupt came in during hash_page,
......@@ -1321,12 +1336,14 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
ld r3,SOFTE(r1)
bl .local_irq_restore
b 11f
#else
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
BEGIN_FW_FTR_SECTION
beq fast_exception_return /* Return from exception on success */
ble- 12f /* Failure return from hash_page */
/* fall through */
#endif
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
/* Here we have a page fault that hash_page can't handle. */
_GLOBAL(handle_page_fault)
......@@ -1861,7 +1878,9 @@ _GLOBAL(__secondary_start)
LOAD_REG_ADDR(r3, .start_secondary_prolog)
LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
#ifdef DO_SOFT_DISABLE
BEGIN_FW_FTR_SECTION
ori r4,r4,MSR_EE
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
......@@ -1986,6 +2005,7 @@ _STATIC(start_here_common)
*/
li r3,0
bl .do_cpu_ftr_fixups
bl .do_fw_ftr_fixups
/* ptr to current */
LOAD_REG_IMMEDIATE(r4, init_task)
......@@ -2000,11 +2020,13 @@ _STATIC(start_here_common)
/* Load up the kernel context */
5:
#ifdef DO_SOFT_DISABLE
BEGIN_FW_FTR_SECTION
li r5,0
stb r5,PACAPROCENABLED(r13) /* Soft Disabled */
mfmsr r5
ori r5,r5,MSR_EE /* Hard Enabled */
mtmsrd r5
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
bl .start_kernel
......
......@@ -325,6 +325,52 @@ _GLOBAL(do_cpu_ftr_fixups)
isync
b 1b
/*
* do_fw_ftr_fixups - goes through the list of firmware feature fixups
* and writes nop's over sections of code that don't apply for this firmware.
* r3 = data offset (not changed)
*/
_GLOBAL(do_fw_ftr_fixups)
/* Get firmware features */
LOAD_REG_IMMEDIATE(r6,powerpc_firmware_features)
sub r6,r6,r3
ld r4,0(r6)
/* Get the fixup table */
LOAD_REG_IMMEDIATE(r6,__start___fw_ftr_fixup)
sub r6,r6,r3
LOAD_REG_IMMEDIATE(r7,__stop___fw_ftr_fixup)
sub r7,r7,r3
/* Do the fixup */
1: cmpld r6,r7
bgelr
addi r6,r6,32
ld r8,-32(r6) /* mask */
and r8,r8,r4
ld r9,-24(r6) /* value */
cmpld r8,r9
beq 1b
ld r8,-16(r6) /* section begin */
ld r9,-8(r6) /* section end */
subf. r9,r8,r9
beq 1b
/* write nops over the section of code */
/* todo: if large section, add a branch at the start of it */
srwi r9,r9,2
mtctr r9
sub r8,r8,r3
lis r0,0x60000000@h /* nop */
3: stw r0,0(r8)
BEGIN_FTR_SECTION
dcbst 0,r8 /* suboptimal, but simpler */
sync
icbi 0,r8
END_FTR_SECTION_IFSET(CPU_FTR_SPLIT_ID_CACHE)
addi r8,r8,4
bdnz 3b
sync /* additional sync needed on g4 */
isync
b 1b
#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
/*
* Do an IO access in real mode
......
......@@ -132,6 +132,14 @@ SECTIONS
*(__ftr_fixup)
__stop___ftr_fixup = .;
}
#ifdef CONFIG_PPC64
. = ALIGN(8);
__fw_ftr_fixup : {
__start___fw_ftr_fixup = .;
*(__fw_ftr_fixup)
__stop___fw_ftr_fixup = .;
}
#endif
. = ALIGN(PAGE_SIZE);
.init.ramfs : {
......
......@@ -21,6 +21,7 @@
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/firmware.h>
/* void slb_allocate_realmode(unsigned long ea);
*
......@@ -183,6 +184,7 @@ slb_finish_load:
* dont have any LRU information to help us choose a slot.
*/
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
/*
* On iSeries, the "bolted" stack segment can be cast out on
* shared processor switch so we need to check for a miss on
......@@ -194,6 +196,7 @@ slb_finish_load:
li r10,SLB_NUM_BOLTED-1 /* Stack goes in last bolted slot */
cmpld r9,r3
beq 3f
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif /* CONFIG_PPC_ISERIES */
ld r10,PACASTABRR(r13)
......
......@@ -14,34 +14,36 @@
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#include <asm/asm-compat.h>
/* firmware feature bitmask values */
#define FIRMWARE_MAX_FEATURES 63
#define FW_FEATURE_PFT (1UL<<0)
#define FW_FEATURE_TCE (1UL<<1)
#define FW_FEATURE_SPRG0 (1UL<<2)
#define FW_FEATURE_DABR (1UL<<3)
#define FW_FEATURE_COPY (1UL<<4)
#define FW_FEATURE_ASR (1UL<<5)
#define FW_FEATURE_DEBUG (1UL<<6)
#define FW_FEATURE_TERM (1UL<<7)
#define FW_FEATURE_PERF (1UL<<8)
#define FW_FEATURE_DUMP (1UL<<9)
#define FW_FEATURE_INTERRUPT (1UL<<10)
#define FW_FEATURE_MIGRATE (1UL<<11)
#define FW_FEATURE_PERFMON (1UL<<12)
#define FW_FEATURE_CRQ (1UL<<13)
#define FW_FEATURE_VIO (1UL<<14)
#define FW_FEATURE_RDMA (1UL<<15)
#define FW_FEATURE_LLAN (1UL<<16)
#define FW_FEATURE_BULK (1UL<<17)
#define FW_FEATURE_XDABR (1UL<<18)
#define FW_FEATURE_MULTITCE (1UL<<19)
#define FW_FEATURE_SPLPAR (1UL<<20)
#define FW_FEATURE_ISERIES (1UL<<21)
#define FW_FEATURE_LPAR (1UL<<22)
#define FW_FEATURE_PFT ASM_CONST(0x0000000000000001)
#define FW_FEATURE_TCE ASM_CONST(0x0000000000000002)
#define FW_FEATURE_SPRG0 ASM_CONST(0x0000000000000004)
#define FW_FEATURE_DABR ASM_CONST(0x0000000000000008)
#define FW_FEATURE_COPY ASM_CONST(0x0000000000000010)
#define FW_FEATURE_ASR ASM_CONST(0x0000000000000020)
#define FW_FEATURE_DEBUG ASM_CONST(0x0000000000000040)
#define FW_FEATURE_TERM ASM_CONST(0x0000000000000080)
#define FW_FEATURE_PERF ASM_CONST(0x0000000000000100)
#define FW_FEATURE_DUMP ASM_CONST(0x0000000000000200)
#define FW_FEATURE_INTERRUPT ASM_CONST(0x0000000000000400)
#define FW_FEATURE_MIGRATE ASM_CONST(0x0000000000000800)
#define FW_FEATURE_PERFMON ASM_CONST(0x0000000000001000)
#define FW_FEATURE_CRQ ASM_CONST(0x0000000000002000)
#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000)
#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000)
#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000)
#define FW_FEATURE_BULK ASM_CONST(0x0000000000020000)
#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000)
#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000)
#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000)
#define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000)
#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000)
#ifndef __ASSEMBLY__
enum {
#ifdef CONFIG_PPC64
......@@ -94,6 +96,23 @@ extern void machine_check_fwnmi(void);
/* This is true if we are using the firmware NMI handler (typically LPAR) */
extern int fwnmi_active;
#else /* __ASSEMBLY__ */
#define BEGIN_FW_FTR_SECTION 96:
#define END_FW_FTR_SECTION(msk, val) \
97: \
.section __fw_ftr_fixup,"a"; \
.align 3; \
.llong msk; \
.llong val; \
.llong 96b; \
.llong 97b; \
.previous
#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk))
#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0)
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_FIRMWARE_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment