Skip to content

L
linux
Commit 3f8a9440 authored by Tony Cheng's avatar Tony Cheng Committed by Alex Deucher
Browse files
Options

drm/amd/display: support CP2520 pattern 2 for HBR2 compliance 

- also some clean up
Signed-off-by: default avatarTony Cheng <tony.cheng@amd.com>
Acked-by: default avatarHarry Wentland <Harry.Wentland@amd.com>
Reviewed-by: default avatarCharlene Liu <Charlene.Liu@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent e73c1efc
Hide whitespace changes
Inline Side-by-side
Showing with 66 additions and 95 deletions
drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c
View file @ 3f8a9440
......@@ -169,9 +169,6 @@ static void disable_prbs_symbols(
static void disable_prbs_mode(
struct dce110_link_encoder *enc110)
{
/* This register resides in DP back end block;
* transmitter is used for the offset */
REG_UPDATE(DP_DPHY_PRBS_CNTL, DPHY_PRBS_EN, 0);
}
......@@ -216,9 +213,7 @@ static void set_dp_phy_pattern_d102(
disable_prbs_symbols(enc110, true);
/* Disable PRBS mode,
* make sure DPHY_PRBS_CNTL.DPHY_PRBS_EN=0 */
/* Disable PRBS mode */
disable_prbs_mode(enc110);
/* Program debug symbols to be output */
......@@ -264,43 +259,54 @@ void dce110_link_encoder_set_dp_phy_pattern_training_pattern(
enable_phy_bypass_mode(enc110, false);
/* Disable PRBS mode,
* make sure DPHY_PRBS_CNTL.DPHY_PRBS_EN=0 */
/* Disable PRBS mode */
disable_prbs_mode(enc110);
}
static void setup_panel_mode(
struct dce110_link_encoder *enc110,
enum dp_panel_mode panel_mode)
{
uint32_t value;
ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
value = REG_READ(DP_DPHY_INTERNAL_CTRL);
switch (panel_mode) {
case DP_PANEL_MODE_EDP:
value = 0x1;
break;
case DP_PANEL_MODE_SPECIAL:
value = 0x11;
break;
default:
value = 0x0;
break;
}
REG_WRITE(DP_DPHY_INTERNAL_CTRL, value);
}
static void set_dp_phy_pattern_symbol_error(
struct dce110_link_encoder *enc110)
{
/* Disable PHY Bypass mode to setup the test pattern */
uint32_t value = 0x0;
enable_phy_bypass_mode(enc110, false);
/* program correct panel mode*/
{
ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
/*DCE 120 does not have this reg*/
REG_WRITE(DP_DPHY_INTERNAL_CTRL, value);
}
setup_panel_mode(enc110, DP_PANEL_MODE_DEFAULT);
/* A PRBS23 pattern is used for most DP electrical measurements. */
/* Enable PRBS symbols on the lanes */
disable_prbs_symbols(enc110, false);
/* For PRBS23 Set bit DPHY_PRBS_SEL=1 and Set bit DPHY_PRBS_EN=1 */
{
REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
DPHY_PRBS_SEL, 1,
DPHY_PRBS_EN, 1);
}
REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
DPHY_PRBS_SEL, 1,
DPHY_PRBS_EN, 1);
/* Enable phy bypass mode to enable the test pattern */
enable_phy_bypass_mode(enc110, true);
}
......@@ -308,24 +314,19 @@ static void set_dp_phy_pattern_prbs7(
struct dce110_link_encoder *enc110)
{
/* Disable PHY Bypass mode to setup the test pattern */
enable_phy_bypass_mode(enc110, false);
/* A PRBS7 pattern is used for most DP electrical measurements. */
/* Enable PRBS symbols on the lanes */
disable_prbs_symbols(enc110, false);
/* For PRBS7 Set bit DPHY_PRBS_SEL=0 and Set bit DPHY_PRBS_EN=1 */
{
REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
DPHY_PRBS_SEL, 0,
DPHY_PRBS_EN, 1);
}
REG_UPDATE_2(DP_DPHY_PRBS_CNTL,
DPHY_PRBS_SEL, 0,
DPHY_PRBS_EN, 1);
/* Enable phy bypass mode to enable the test pattern */
enable_phy_bypass_mode(enc110, true);
}
......@@ -374,7 +375,7 @@ static void set_dp_phy_pattern_80bit_custom(
enable_phy_bypass_mode(enc110, true);
}
static void set_dp_phy_pattern_hbr2_compliance(
static void set_dp_phy_pattern_hbr2_compliance_cp2520_2(
struct dce110_link_encoder *enc110)
{
......@@ -391,56 +392,34 @@ static void set_dp_phy_pattern_hbr2_compliance(
enable_phy_bypass_mode(enc110, false);
/* Setup DIG encoder in DP SST mode */
enc110->base.funcs->setup(&enc110->base, SIGNAL_TYPE_DISPLAY_PORT);
/* program correct panel mode*/
{
ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
REG_WRITE(DP_DPHY_INTERNAL_CTRL, 0x0);
}
/* ensure normal panel mode. */
setup_panel_mode(enc110, DP_PANEL_MODE_DEFAULT);
/* no vbid after BS (SR)
* DP_LINK_FRAMING_CNTL changed history Sandra Liu
* 11000260 / 11000104 / 110000FC */
REG_UPDATE_3(DP_LINK_FRAMING_CNTL,
DP_IDLE_BS_INTERVAL, 0xFC,
DP_VBID_DISABLE, 1,
DP_VID_ENHANCED_FRAME_MODE, 1);
/* TODO DP_LINK_FRAMING_CNTL should always use hardware default value
* output except output hbr2_compliance pattern for physical PHY
* measurement. This is not normal usage case. SW should reset this
* register to hardware default value after end use of HBR2 eye
*/
BREAK_TO_DEBUGGER();
/* TODO: do we still need this, find out at compliance test
addr = mmDP_LINK_FRAMING_CNTL + fe_addr_offset;
value = dal_read_reg(ctx, addr);
set_reg_field_value(value, 0xFC,
DP_LINK_FRAMING_CNTL, DP_IDLE_BS_INTERVAL);
set_reg_field_value(value, 1,
DP_LINK_FRAMING_CNTL, DP_VBID_DISABLE);
set_reg_field_value(value, 1,
DP_LINK_FRAMING_CNTL, DP_VID_ENHANCED_FRAME_MODE);
dal_write_reg(ctx, addr, value);
*/
/* swap every BS with SR */
REG_UPDATE(DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_BS_COUNT, 0);
/*TODO add support for this test pattern
* support_dp_hbr2_eye_pattern
*/
/* select cp2520 pattern 2 */
if (REG(DP_DPHY_HBR2_PATTERN_CONTROL))
REG_UPDATE(DP_DPHY_HBR2_PATTERN_CONTROL,
DP_DPHY_HBR2_PATTERN_CONTROL, 0x2);
/* set link training complete */
set_link_training_complete(enc110, true);
/* do not enable video stream */
/* disable video stream */
REG_UPDATE(DP_VID_STREAM_CNTL, DP_VID_STREAM_ENABLE, 0);
/* Disable PHY Bypass mode to setup the test pattern */
enable_phy_bypass_mode(enc110, false);
}
......@@ -448,41 +427,26 @@ static void set_dp_phy_pattern_passthrough_mode(
struct dce110_link_encoder *enc110,
enum dp_panel_mode panel_mode)
{
uint32_t value;
/* program correct panel mode */
{
ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
value = REG_READ(DP_DPHY_INTERNAL_CTRL);
setup_panel_mode(enc110, panel_mode);
switch (panel_mode) {
case DP_PANEL_MODE_EDP:
value = 0x1;
break;
case DP_PANEL_MODE_SPECIAL:
value = 0x11;
break;
default:
value = 0x0;
break;
}
REG_WRITE(DP_DPHY_INTERNAL_CTRL, value);
}
/* restore LINK_FRAMING_CNTL and DPHY_SCRAMBLER_BS_COUNT
* in case we were doing HBR2 compliance pattern before
*/
REG_UPDATE_3(DP_LINK_FRAMING_CNTL,
DP_IDLE_BS_INTERVAL, 0x2000,
DP_VBID_DISABLE, 0,
DP_VID_ENHANCED_FRAME_MODE, 1);
REG_UPDATE(DP_DPHY_SCRAM_CNTL, DPHY_SCRAMBLER_BS_COUNT, 0x1FF);
/* set link training complete */
set_link_training_complete(enc110, true);
/* Disable PHY Bypass mode to setup the test pattern */
enable_phy_bypass_mode(enc110, false);
/* Disable PRBS mode,
* make sure DPHY_PRBS_CNTL.DPHY_PRBS_EN=0 */
/* Disable PRBS mode */
disable_prbs_mode(enc110);
}
......@@ -828,8 +792,7 @@ static void link_encoder_disable(struct dce110_link_encoder *enc110)
REG_UPDATE(DP_LINK_CNTL, DP_LINK_TRAINING_COMPLETE, 0);
/* reset panel mode */
ASSERT(REG(DP_DPHY_INTERNAL_CTRL));
REG_WRITE(DP_DPHY_INTERNAL_CTRL, 0);
setup_panel_mode(enc110, DP_PANEL_MODE_DEFAULT);
}
static void hpd_initialize(
......@@ -1433,7 +1396,7 @@ void dce110_link_encoder_dp_set_phy_pattern(
enc110, param->custom_pattern);
break;
case DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE:
set_dp_phy_pattern_hbr2_compliance(enc110);
set_dp_phy_pattern_hbr2_compliance_cp2520_2(enc110);
break;
case DP_TEST_PATTERN_VIDEO_MODE: {
set_dp_phy_pattern_passthrough_mode(
......
drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.h
View file @ 3f8a9440
......@@ -78,22 +78,29 @@
SRI(DP_DPHY_INTERNAL_CTRL, DP, id), \
SR(DCI_MEM_PWR_STATUS)
#define LE_DCE100_REG_LIST(id)\
LE_COMMON_REG_LIST_BASE(id), \
SRI(DP_DPHY_BS_SR_SWAP_CNTL, DP, id), \
SRI(DP_DPHY_INTERNAL_CTRL, DP, id), \
SR(DCI_MEM_PWR_STATUS)
#define LE_DCE110_REG_LIST(id)\
LE_COMMON_REG_LIST_BASE(id), \
SRI(DP_DPHY_BS_SR_SWAP_CNTL, DP, id), \
SRI(DP_DPHY_INTERNAL_CTRL, DP, id), \
SRI(DP_DPHY_HBR2_PATTERN_CONTROL, DP, id), \
SR(DCI_MEM_PWR_STATUS)
#define LE_DCE120_REG_LIST(id)\
LE_COMMON_REG_LIST_BASE(id), \
SRI(DP_DPHY_BS_SR_SWAP_CNTL, DP, id), \
SRI(DP_DPHY_HBR2_PATTERN_CONTROL, DP, id), \
SR(DCI_MEM_PWR_STATUS)
#define LE_DCE80_REG_LIST(id)\
SRI(DP_DPHY_INTERNAL_CTRL, DP, id), \
LE_COMMON_REG_LIST_BASE(id)
struct dce110_link_enc_aux_registers {
uint32_t AUX_CONTROL;
uint32_t AUX_DPHY_RX_CONTROL0;
......@@ -144,6 +151,7 @@ struct dce110_link_enc_registers {
uint32_t DP_VID_STREAM_CNTL;
uint32_t DP_DPHY_FAST_TRAINING;
uint32_t DP_DPHY_BS_SR_SWAP_CNTL;
uint32_t DP_DPHY_HBR2_PATTERN_CONTROL;
uint32_t DP_SEC_CNTL1;
};
......
drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c
View file @ 3f8a9440
......@@ -265,7 +265,7 @@ static const struct dce110_link_enc_hpd_registers link_enc_hpd_regs[] = {
#define link_regs(id)\
[id] = {\
LE_DCE110_REG_LIST(id)\
LE_DCE100_REG_LIST(id)\
}
static const struct dce110_link_enc_registers link_enc_regs[] = {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7