Commit 3fa395d2 authored by Madalin Bucur's avatar Madalin Bucur Committed by Shawn Guo

arm64: dts: add LS1046A DPAA FMan nodes

Add the DPAA 1.x FMan device tree nodes for LS1046A boards.
Signed-off-by: default avatarMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent bf02f2ff
/*
* QorIQ FMan v3 device tree nodes for ls1046
*
* Copyright 2015-2016 Freescale Semiconductor Inc.
*
* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
*/
&soc {
/* include used FMan blocks */
#include "qoriq-fman3-0.dtsi"
#include "qoriq-fman3-0-1g-0.dtsi"
#include "qoriq-fman3-0-1g-1.dtsi"
#include "qoriq-fman3-0-1g-2.dtsi"
#include "qoriq-fman3-0-1g-3.dtsi"
#include "qoriq-fman3-0-1g-4.dtsi"
#include "qoriq-fman3-0-1g-5.dtsi"
#include "qoriq-fman3-0-10g-0.dtsi"
#include "qoriq-fman3-0-10g-1.dtsi"
};
&fman0 {
/* these aliases provide the FMan ports mapping */
enet0: ethernet@e0000 {
};
enet1: ethernet@e2000 {
};
enet2: ethernet@e4000 {
};
enet3: ethernet@e6000 {
};
enet4: ethernet@e8000 {
};
enet5: ethernet@ea000 {
};
enet6: ethernet@f0000 {
};
enet7: ethernet@f2000 {
};
};
......@@ -210,3 +210,5 @@ qflash0: s25fl128s@0 {
reg = <0>;
};
};
#include "fsl-ls1046-post.dtsi"
......@@ -156,3 +156,63 @@ qflash1: s25fs512s@1 {
reg = <1>;
};
};
#include "fsl-ls1046-post.dtsi"
&fman0 {
ethernet@e4000 {
phy-handle = <&rgmii_phy1>;
phy-connection-type = "rgmii";
};
ethernet@e6000 {
phy-handle = <&rgmii_phy2>;
phy-connection-type = "rgmii";
};
ethernet@e8000 {
phy-handle = <&sgmii_phy1>;
phy-connection-type = "sgmii";
};
ethernet@ea000 {
phy-handle = <&sgmii_phy2>;
phy-connection-type = "sgmii";
};
ethernet@f0000 { /* 10GEC1 */
phy-handle = <&aqr106_phy>;
phy-connection-type = "xgmii";
};
ethernet@f2000 { /* 10GEC2 */
fixed-link = <0 1 1000 0 0>;
phy-connection-type = "xgmii";
};
mdio@fc000 {
rgmii_phy1: ethernet-phy@1 {
reg = <0x1>;
};
rgmii_phy2: ethernet-phy@2 {
reg = <0x2>;
};
sgmii_phy1: ethernet-phy@3 {
reg = <0x3>;
};
sgmii_phy2: ethernet-phy@4 {
reg = <0x4>;
};
};
mdio@fd000 {
aqr106_phy: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c45";
interrupts = <0 131 4>;
reg = <0x0>;
};
};
};
......@@ -55,6 +55,15 @@ / {
aliases {
crypto = &crypto;
fman0 = &fman0;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
ethernet4 = &enet4;
ethernet5 = &enet5;
ethernet6 = &enet6;
ethernet7 = &enet7;
};
cpus {
......@@ -174,7 +183,7 @@ gic: interrupt-controller@1400000 {
IRQ_TYPE_LEVEL_LOW)>;
};
soc {
soc: soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment