Commit 3fa986fa authored by Martin Michlmayr's avatar Martin Michlmayr Committed by Ralf Baechle

[MIPS] Create consistency in "system type" selection.

    
The "system type" Kconfig options on MIPS are not consistent.  For
some platforms, only the name is listed while other entries are
prepended with "Support for".  Remove this as it doesn't make sense
when describing the "system type".
Signed-off-by: default avatarMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 04b6b3b6
......@@ -13,7 +13,7 @@ choice
default SGI_IP22
config MIPS_MTX1
bool "Support for 4G Systems MTX-1 board"
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select SOC_AU1500
......@@ -120,7 +120,7 @@ config MIPS_MIRAGE
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_COBALT
bool "Support for Cobalt Server"
bool "Cobalt Server"
select DMA_NONCOHERENT
select HW_HAS_PCI
select I8259
......@@ -132,7 +132,7 @@ config MIPS_COBALT
select SYS_SUPPORTS_LITTLE_ENDIAN
config MACH_DECSTATION
bool "Support for DECstations"
bool "DECstations"
select BOOT_ELF32
select DMA_NONCOHERENT
select EARLY_PRINTK
......@@ -158,7 +158,7 @@ config MACH_DECSTATION
otherwise choose R3000.
config MIPS_EV64120
bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
......@@ -175,7 +175,7 @@ config MIPS_EV64120
kernel for this platform.
config MIPS_EV96100
bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
......@@ -195,7 +195,7 @@ config MIPS_EV96100
here if you wish to build a kernel for this platform.
config MIPS_IVR
bool "Support for Globespan IVR board"
bool "Globespan IVR board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
......@@ -211,7 +211,7 @@ config MIPS_IVR
build a kernel for this platform.
config MIPS_ITE8172
bool "Support for ITE 8172G board"
bool "ITE 8172G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ITE_BOARD_GEN
......@@ -228,7 +228,7 @@ config MIPS_ITE8172
a kernel for this platform.
config MACH_JAZZ
bool "Support for the Jazz family of machines"
bool "Jazz family of machines"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
......@@ -246,7 +246,7 @@ config MACH_JAZZ
Olivetti M700-10 workstations.
config LASAT
bool "Support for LASAT Networks platforms"
bool "LASAT Networks platforms"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_GT64120
......@@ -258,7 +258,7 @@ config LASAT
select SYS_SUPPORTS_LITTLE_ENDIAN
config MIPS_ATLAS
bool "Support for MIPS Atlas board"
bool "MIPS Atlas board"
select BOOT_ELF32
select DMA_NONCOHERENT
select IRQ_CPU
......@@ -283,7 +283,7 @@ config MIPS_ATLAS
board.
config MIPS_MALTA
bool "Support for MIPS Malta board"
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select HAVE_STD_PC_SERIAL_PORT
......@@ -311,7 +311,7 @@ config MIPS_MALTA
board.
config MIPS_SEAD
bool "Support for MIPS SEAD board (EXPERIMENTAL)"
bool "MIPS SEAD board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select IRQ_CPU
select DMA_NONCOHERENT
......@@ -328,7 +328,7 @@ config MIPS_SEAD
board.
config MIPS_SIM
bool 'Support for MIPS simulator (MIPSsim)'
bool 'MIPS simulator (MIPSsim)'
select DMA_NONCOHERENT
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
......@@ -341,7 +341,7 @@ config MIPS_SIM
emulator.
config MOMENCO_JAGUAR_ATX
bool "Support for Momentum Jaguar board"
bool "Momentum Jaguar board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
......@@ -361,7 +361,7 @@ config MOMENCO_JAGUAR_ATX
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT
bool "Support for Momentum Ocelot board"
bool "Momentum Ocelot board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -378,7 +378,7 @@ config MOMENCO_OCELOT
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_3
bool "Support for Momentum Ocelot-3 board"
bool "Momentum Ocelot-3 board"
select BOOT_ELF32
select DMA_NONCOHERENT
select HW_HAS_PCI
......@@ -397,7 +397,7 @@ config MOMENCO_OCELOT_3
PMC-Sierra Rm79000 core.
config MOMENCO_OCELOT_C
bool "Support for Momentum Ocelot-C board"
bool "Momentum Ocelot-C board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -414,7 +414,7 @@ config MOMENCO_OCELOT_C
Momentum Computer <http://www.momenco.com/>.
config MOMENCO_OCELOT_G
bool "Support for Momentum Ocelot-G board"
bool "Momentum Ocelot-G board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -431,23 +431,23 @@ config MOMENCO_OCELOT_G
Momentum Computer <http://www.momenco.com/>.
config MIPS_XXS1500
bool "Support for MyCable XXS1500 board"
bool "MyCable XXS1500 board"
select DMA_NONCOHERENT
select SOC_AU1500
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_V2PCI
bool "Support for Philips PNX8550 based Viper2-PCI board"
bool "Philips PNX8550 based Viper2-PCI board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_JBS
bool "Support for Philips PNX8550 based JBS board"
bool "Philips PNX8550 based JBS board"
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config DDB5074
bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DDB5XXX_COMMON
select DMA_NONCOHERENT
......@@ -465,7 +465,7 @@ config DDB5074
evaluation board.
config DDB5476
bool "Support for NEC DDB Vrc-5476"
bool "NEC DDB Vrc-5476"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HAVE_STD_PC_SERIAL_PORT
......@@ -486,7 +486,7 @@ config DDB5476
IDE controller, PS2 keyboard, PS2 mouse, etc.
config DDB5477
bool "Support for NEC DDB Vrc-5477"
bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
select DMA_NONCOHERENT
select HW_HAS_PCI
......@@ -504,13 +504,13 @@ config DDB5477
ether port USB, AC97, PCI, etc.
config MACH_VR41XX
bool "Support for NEC VR4100 series based machines"
bool "NEC VR41XX-based machines"
select SYS_HAS_CPU_VR41XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
config PMC_YOSEMITE
bool "Support for PMC-Sierra Yosemite eval board"
bool "PMC-Sierra Yosemite eval board"
select DMA_COHERENT
select HW_HAS_PCI
select IRQ_CPU
......@@ -527,7 +527,7 @@ config PMC_YOSEMITE
manufactured by PMC-Sierra.
config QEMU
bool "Support for Qemu"
bool "Qemu"
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
......@@ -547,7 +547,7 @@ config QEMU
can be found at http://www.linux-mips.org/wiki/Qemu.
config SGI_IP22
bool "Support for SGI IP22 (Indy/Indigo2)"
bool "SGI IP22 (Indy/Indigo2)"
select ARC
select ARC32
select BOOT_ELF32
......@@ -567,7 +567,7 @@ config SGI_IP22
that runs on these, say Y here.
config SGI_IP27
bool "Support for SGI IP27 (Origin200/2000)"
bool "SGI IP27 (Origin200/2000)"
select ARC
select ARC64
select BOOT_ELF64
......@@ -583,7 +583,7 @@ config SGI_IP27
here.
config SGI_IP32
bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
bool "SGI IP32 (O2) (EXPERIMENTAL)"
depends on EXPERIMENTAL
select ARC
select ARC32
......@@ -604,7 +604,7 @@ config SGI_IP32
If you want this kernel to run on SGI O2 workstation, say Y here.
config SIBYTE_BIGSUR
bool "Support for Sibyte BCM91480B-BigSur"
bool "Sibyte BCM91480B-BigSur"
select BOOT_ELF32
select DMA_COHERENT
select PCI_DOMAINS
......@@ -615,7 +615,7 @@ config SIBYTE_BIGSUR
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SWARM
bool "Support for Sibyte BCM91250A-SWARM"
bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
select SIBYTE_SB1250
......@@ -626,7 +626,7 @@ config SIBYTE_SWARM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_SENTOSA
bool "Support for Sibyte BCM91250E-Sentosa"
bool "Sibyte BCM91250E-Sentosa"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -637,7 +637,7 @@ config SIBYTE_SENTOSA
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_RHONE
bool "Support for Sibyte BCM91125E-Rhone"
bool "Sibyte BCM91125E-Rhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -648,7 +648,7 @@ config SIBYTE_RHONE
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CARMEL
bool "Support for Sibyte BCM91120x-Carmel"
bool "Sibyte BCM91120x-Carmel"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -659,7 +659,7 @@ config SIBYTE_CARMEL
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_PTSWARM
bool "Support for Sibyte BCM91250PT-PTSWARM"
bool "Sibyte BCM91250PT-PTSWARM"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -671,7 +671,7 @@ config SIBYTE_PTSWARM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_LITTLESUR
bool "Support for Sibyte BCM91250C2-LittleSur"
bool "Sibyte BCM91250C2-LittleSur"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -683,7 +683,7 @@ config SIBYTE_LITTLESUR
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHINE
bool "Support for Sibyte BCM91120C-CRhine"
bool "Sibyte BCM91120C-CRhine"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -694,7 +694,7 @@ config SIBYTE_CRHINE
select SYS_SUPPORTS_LITTLE_ENDIAN
config SIBYTE_CRHONE
bool "Support for Sibyte BCM91125C-CRhone"
bool "Sibyte BCM91125C-CRhone"
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
......@@ -706,7 +706,7 @@ config SIBYTE_CRHONE
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM200_PCI
bool "Support for SNI RM200 PCI"
bool "SNI RM200 PCI"
select ARC
select ARC32
select ARCH_MAY_HAVE_PC_FDC
......@@ -732,7 +732,7 @@ config SNI_RM200_PCI
support this machine type.
config TOSHIBA_JMR3927
bool "Support for Toshiba JMR-TX3927 board"
bool "Toshiba JMR-TX3927 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_TX3927
......@@ -743,7 +743,7 @@ config TOSHIBA_JMR3927
select TOSHIBA_BOARDS
config TOSHIBA_RBTX4927
bool "Support for Toshiba TBTX49[23]7 board"
bool "Toshiba TBTX49[23]7 board"
select DMA_NONCOHERENT
select HAS_TXX9_SERIAL
select HW_HAS_PCI
......@@ -760,7 +760,7 @@ config TOSHIBA_RBTX4927
support this machine type
config TOSHIBA_RBTX4938
bool "Support for Toshiba RBTX4938 board"
bool "Toshiba RBTX4938 board"
select HAVE_STD_PC_SERIAL_PORT
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment