Merge tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Subsytem:
   - rtc_class is now const

  Drivers:
   - ds1511: cleanup, set date and time range and alarm offset limit
   - max31335: fix interrupt handler
   - pcf8523: improve suspend support"

* tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits)
  MAINTAINER: Include linux-arm-msm for Qualcomm RTC patches
  dt-bindings: rtc: zynqmp: Add support for Versal/Versal NET SoCs
  rtc: class: make rtc_class constant
  dt-bindings: rtc: abx80x: Improve checks on trickle charger constraints
  MAINTAINERS: adjust file entry in ARM/Mediatek RTC DRIVER
  rtc: nct3018y: fix possible NULL dereference
  rtc: max31335: fix interrupt status reg
  rtc: mt6397: select IRQ_DOMAIN instead of depending on it
  dt-bindings: rtc: abx80x: convert to yaml
  rtc: m41t80: Use the unified property API get the wakeup-source property
  dt-bindings: at91rm9260-rtt: add sam9x7 compatible
  dt-bindings: rtc: convert MT7622 RTC to the json-schema
  dt-bindings: rtc: convert MT2717 RTC to the json-schema
  rtc: pcf8523: add suspend handlers for alarm IRQ
  rtc: ds1511: set alarm offset limit
  rtc: ds1511: set range
  rtc: ds1511: drop inline/noinline hints
  rtc: ds1511: rename pdata
  rtc: ds1511: implement ds1511_rtc_read_alarm properly
  rtc: ds1511: remove partial alarm support
  ...

Documentation/devicetree/bindings/rtc/abracon,abx80x.txt

-Abracon ABX80X I2C ultra low power RTC/Alarm chip
-
-The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
-ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
-is the superset of ab180x.
-
-Required properties:
-
- - "compatible": should one of:
-        "abracon,abx80x"
-        "abracon,ab0801"
-        "abracon,ab0803"
-        "abracon,ab0804"
-        "abracon,ab0805"
-        "abracon,ab1801"
-        "abracon,ab1803"
-        "abracon,ab1804"
-        "abracon,ab1805"
-        "microcrystal,rv1805"
-	Using "abracon,abx80x" will enable chip autodetection.
- - "reg": I2C bus address of the device
-
-Optional properties:
-
-The abx804 and abx805 have a trickle charger that is able to charge the
-connected battery or supercap. Both the following properties have to be defined
-and valid to enable charging:
-
- - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
- - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
-                          resistor, the other values are in kOhm.

Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+maintainers:
+  - linux-rtc@vger.kernel.org
+
+properties:
+  compatible:
+    description:
+      The wildcard 'abracon,abx80x' may be used to support a mix
+      of different abracon rtc`s. In this case the driver
+      must perform auto-detection from ID register.
+    enum:
+      - abracon,abx80x
+      - abracon,ab0801
+      - abracon,ab0803
+      - abracon,ab0804
+      - abracon,ab0805
+      - abracon,ab1801
+      - abracon,ab1803
+      - abracon,ab1804
+      - abracon,ab1805
+      - microcrystal,rv1805
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  abracon,tc-diode:
+    description:
+      Trickle-charge diode type.
+      Required to enable charging backup battery.
+
+      Supported are 'standard' diodes with a 0.6V drop
+      and 'schottky' diodes with a 0.3V drop.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - standard
+      - schottky
+
+  abracon,tc-resistor:
+    description:
+      Trickle-charge resistor value in kOhm.
+      Required to enable charging backup battery.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 3, 6, 11]
+
+dependentRequired:
+  abracon,tc-diode: ["abracon,tc-resistor"]
+  abracon,tc-resistor: ["abracon,tc-diode"]
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - abracon,abx80x
+                - abracon,ab0804
+                - abracon,ab1804
+                - abracon,ab0805
+                - abracon,ab1805
+    then:
+      properties:
+        abracon,tc-diode: false
+        abracon,tc-resistor: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@69 {
+            compatible = "abracon,abx80x";
+            reg = <0x69>;
+            abracon,tc-diode = "schottky";
+            abracon,tc-resistor = <3>;
+            interrupts = <44 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };

Documentation/devicetree/bindings/rtc/atmel,at91sam9260-rtt.yaml

@@ -19,7 +19,9 @@ properties:
       - items:
           - const: atmel,at91sam9260-rtt
       - items:
-          - const: microchip,sam9x60-rtt
+          - enum:
+              - microchip,sam9x60-rtt
+              - microchip,sam9x7-rtt
           - const: atmel,at91sam9260-rtt
       - items:
           - const: microchip,sama7g5-rtt

Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/mediatek,mt2712-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT2712 on-SoC RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Ran Bi <ran.bi@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt2712-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rtc@10011000 {
+        compatible = "mediatek,mt2712-rtc";
+        reg = <0x10011000 0x1000>;
+        interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
+    };

Documentation/devicetree/bindings/rtc/mediatek,mt7622-rtc.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/mediatek,mt7622-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7622 on-SoC RTC
+
+allOf:
+  - $ref: rtc.yaml#
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7622-rtc
+      - const: mediatek,soc-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: rtc
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rtc@10212800 {
+        compatible = "mediatek,mt7622-rtc", "mediatek,soc-rtc";
+        reg = <0x10212800 0x200>;
+        interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_RTC>;
+        clock-names = "rtc";
+    };

Documentation/devicetree/bindings/rtc/rtc-mt2712.txt

-Device-Tree bindings for MediaTek SoC based RTC
-
-Required properties:
-- compatible	    : Should be "mediatek,mt2712-rtc" : for MT2712 SoC
-- reg 		    : Specifies base physical address and size of the registers;
-- interrupts	    : Should contain the interrupt for RTC alarm;
-
-Example:
-
-rtc: rtc@10011000 {
-	compatible = "mediatek,mt2712-rtc";
-	reg = <0 0x10011000 0 0x1000>;
-	interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_LOW>;
-};

Documentation/devicetree/bindings/rtc/rtc-mt7622.txt

-Device-Tree bindings for MediaTek SoC based RTC
-
-Required properties:
-- compatible	    : Should be
-			"mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC
-- reg 		    : Specifies base physical address and size of the registers;
-- interrupts	    : Should contain the interrupt for RTC alarm;
-- clocks	    : Specifies list of clock specifiers, corresponding to
-		      entries in clock-names property;
-- clock-names	    : Should contain "rtc" entries
-
-Example:
-
-rtc: rtc@10212800 {
-	compatible = "mediatek,mt7622-rtc",
-		     "mediatek,soc-rtc";
-	reg = <0 0x10212800 0 0x200>;
-	interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&topckgen CLK_TOP_RTC>;
-	clock-names = "rtc";
-};

Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml

@@ -18,7 +18,13 @@ allOf:
 
 properties:
   compatible:
-    const: xlnx,zynqmp-rtc
+    oneOf:
+      - const: xlnx,zynqmp-rtc
+      - items:
+          - enum:
+              - xlnx,versal-rtc
+              - xlnx,versal-net-rtc
+          - const: xlnx,zynqmp-rtc
 
   reg:
     maxItems: 1
@@ -48,6 +54,9 @@ properties:
     default: 0x198233
     deprecated: true
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg

MAINTAINERS

@@ -2377,8 +2377,8 @@ M:	Sean Wang <sean.wang@mediatek.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/rtc/rtc-mt2712.txt
-F:	Documentation/devicetree/bindings/rtc/rtc-mt7622.txt
+F:	Documentation/devicetree/bindings/rtc/mediatek,mt2712-rtc.yaml
+F:	Documentation/devicetree/bindings/rtc/mediatek,mt7622-rtc.yaml
 F:	drivers/rtc/rtc-mt2712.c
 F:	drivers/rtc/rtc-mt6397.c
 F:	drivers/rtc/rtc-mt7622.c
@@ -2617,6 +2617,7 @@ F:	drivers/pci/controller/dwc/pcie-qcom.c
 F:	drivers/phy/qualcomm/
 F:	drivers/power/*/msm*
 F:	drivers/reset/reset-qcom-*
+F:	drivers/rtc/rtc-pm8xxx.c
 F:	drivers/spi/spi-geni-qcom.c
 F:	drivers/spi/spi-qcom-qspi.c
 F:	drivers/spi/spi-qup.c

drivers/rtc/Kconfig

@@ -1858,7 +1858,8 @@ config RTC_DRV_MT2712
 
 config RTC_DRV_MT6397
 	tristate "MediaTek PMIC based RTC"
-	depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
+	depends on MFD_MT6397 || COMPILE_TEST
+	select IRQ_DOMAIN
 	help
 	  This selects the MediaTek(R) RTC driver. RTC is part of MediaTek
 	  MT6397 PMIC. You should enable MT6397 PMIC MFD before select

drivers/rtc/class.c

@@ -21,7 +21,6 @@
 #include "rtc-core.h"
 
 static DEFINE_IDA(rtc_ida);
-struct class *rtc_class;
 
 static void rtc_device_release(struct device *dev)
 {
@@ -199,6 +198,11 @@ static SIMPLE_DEV_PM_OPS(rtc_class_dev_pm_ops, rtc_suspend, rtc_resume);
 #define RTC_CLASS_DEV_PM_OPS	NULL
 #endif
 
+const struct class rtc_class = {
+	.name = "rtc",
+	.pm = RTC_CLASS_DEV_PM_OPS,
+};
+
 /* Ensure the caller will set the id before releasing the device */
 static struct rtc_device *rtc_allocate_device(void)
 {
@@ -220,7 +224,7 @@ static struct rtc_device *rtc_allocate_device(void)
 
 	rtc->irq_freq = 1;
 	rtc->max_user_freq = 64;
-	rtc->dev.class = rtc_class;
+	rtc->dev.class = &rtc_class;
 	rtc->dev.groups = rtc_get_dev_attribute_groups();
 	rtc->dev.release = rtc_device_release;
 
@@ -475,13 +479,14 @@ EXPORT_SYMBOL_GPL(devm_rtc_device_register);
 
 static int __init rtc_init(void)
 {
-	rtc_class = class_create("rtc");
-	if (IS_ERR(rtc_class)) {
-		pr_err("couldn't create class\n");
-		return PTR_ERR(rtc_class);
-	}
-	rtc_class->pm = RTC_CLASS_DEV_PM_OPS;
+	int err;
+
+	err = class_register(&rtc_class);
+	if (err)
+		return err;
+
 	rtc_dev_init();
+
 	return 0;
 }
 subsys_initcall(rtc_init);

drivers/rtc/interface.c

@@ -696,7 +696,7 @@ struct rtc_device *rtc_class_open(const char *name)
 	struct device *dev;
 	struct rtc_device *rtc = NULL;
 
-	dev = class_find_device_by_name(rtc_class, name);
+	dev = class_find_device_by_name(&rtc_class, name);
 	if (dev)
 		rtc = to_rtc_device(dev);
 

drivers/rtc/rtc-m41t80.c

@@ -909,10 +909,7 @@ static int m41t80_probe(struct i2c_client *client)
 	if (IS_ERR(m41t80_data->rtc))
 		return PTR_ERR(m41t80_data->rtc);
 
-#ifdef CONFIG_OF
-	wakeup_source = of_property_read_bool(client->dev.of_node,
-					      "wakeup-source");
-#endif
+	wakeup_source = device_property_read_bool(&client->dev, "wakeup-source");
 	if (client->irq > 0) {
 		unsigned long irqflags = IRQF_TRIGGER_LOW;
 

drivers/rtc/rtc-max31335.c

@@ -204,7 +204,7 @@ static bool max31335_volatile_reg(struct device *dev, unsigned int reg)
 		return true;
 
 	/* interrupt status register */
-	if (reg == MAX31335_INT_EN1_A1IE)
+	if (reg == MAX31335_STATUS1)
 		return true;
 
 	/* temperature registers */

drivers/rtc/rtc-nct3018y.c

@@ -102,6 +102,8 @@ static int nct3018y_get_alarm_mode(struct i2c_client *client, unsigned char *ala
 		if (flags < 0)
 			return flags;
 		*alarm_enable = flags & NCT3018Y_BIT_AIE;
+		dev_dbg(&client->dev, "%s:alarm_enable:%x\n", __func__, *alarm_enable);
+
 	}
 
 	if (alarm_flag) {
@@ -110,11 +112,9 @@ static int nct3018y_get_alarm_mode(struct i2c_client *client, unsigned char *ala
 		if (flags < 0)
 			return flags;
 		*alarm_flag = flags & NCT3018Y_BIT_AF;
+		dev_dbg(&client->dev, "%s:alarm_flag:%x\n", __func__, *alarm_flag);
 	}
 
-	dev_dbg(&client->dev, "%s:alarm_enable:%x alarm_flag:%x\n",
-		__func__, *alarm_enable, *alarm_flag);
-
 	return 0;
 }
 

drivers/rtc/rtc-pcf8523.c

@@ -370,6 +370,30 @@ static int pcf8523_rtc_set_offset(struct device *dev, long offset)
 	return regmap_write(pcf8523->regmap, PCF8523_REG_OFFSET, value);
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int pcf8523_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq > 0 && device_may_wakeup(dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int pcf8523_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (client->irq > 0 && device_may_wakeup(dev))
+		disable_irq_wake(client->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pcf8523_pm, pcf8523_suspend, pcf8523_resume);
+
 static const struct rtc_class_ops pcf8523_rtc_ops = {
 	.read_time = pcf8523_rtc_read_time,
 	.set_time = pcf8523_rtc_set_time,
@@ -487,6 +511,7 @@ static struct i2c_driver pcf8523_driver = {
 	.driver = {
 		.name = "rtc-pcf8523",
 		.of_match_table = pcf8523_of_match,
+		.pm = &pcf8523_pm,
 	},
 	.probe = pcf8523_probe,
 	.id_table = pcf8523_id,

include/linux/rtc.h

@@ -42,7 +42,7 @@ static inline time64_t rtc_tm_sub(struct rtc_time *lhs, struct rtc_time *rhs)
 #include <linux/timerqueue.h>
 #include <linux/workqueue.h>
 
-extern struct class *rtc_class;
+extern const struct class rtc_class;
 
 /*
  * For these RTC methods the device parameter is the physical device

kernel/power/suspend_test.c

@@ -201,7 +201,7 @@ static int __init test_suspend(void)
 	}
 
 	/* RTCs have initialized by now too ... can we use one? */
-	dev = class_find_device(rtc_class, NULL, NULL, has_wakealarm);
+	dev = class_find_device(&rtc_class, NULL, NULL, has_wakealarm);
 	if (dev) {
 		rtc = rtc_class_open(dev_name(dev));
 		put_device(dev);

kernel/time/alarmtimer.c

@@ -134,7 +134,7 @@ static struct class_interface alarmtimer_rtc_interface = {
 
 static int alarmtimer_rtc_interface_setup(void)
 {
-	alarmtimer_rtc_interface.class = rtc_class;
+	alarmtimer_rtc_interface.class = &rtc_class;
 	return class_interface_register(&alarmtimer_rtc_interface);
 }
 static void alarmtimer_rtc_interface_remove(void)