irqchip: Add RZ/G2L IA55 Interrupt Controller driver

Add a driver for the Renesas RZ/G2L Interrupt Controller.

This supports external pins being used as interrupts. It supports
one line for NMI, 8 external pins and 32 GPIO pins (out of 123)
to be used as IRQ lines.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220707182314.66610-4-prabhakar.mahadev-lad.rj@bp.renesas.com

drivers/irqchip/Kconfig

@@ -242,6 +242,14 @@ config RENESAS_RZA1_IRQC
 	  Enable support for the Renesas RZ/A1 Interrupt Controller, to use up
 	  to 8 external interrupts with configurable sense select.
 
+config RENESAS_RZG2L_IRQC
+	bool "Renesas RZ/G2L (and alike SoC) IRQC support" if COMPILE_TEST
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN_HIERARCHY
+	help
+	  Enable support for the Renesas RZ/G2L (and alike SoC) Interrupt Controller
+	  for external devices.
+
 config SL28CPLD_INTC
 	bool "Kontron sl28cpld IRQ controller"
 	depends on MFD_SL28CPLD=y || COMPILE_TEST

drivers/irqchip/Makefile

@@ -51,6 +51,7 @@ obj-$(CONFIG_RDA_INTC)			+= irq-rda-intc.o
 obj-$(CONFIG_RENESAS_INTC_IRQPIN)	+= irq-renesas-intc-irqpin.o
 obj-$(CONFIG_RENESAS_IRQC)		+= irq-renesas-irqc.o
 obj-$(CONFIG_RENESAS_RZA1_IRQC)		+= irq-renesas-rza1.o
+obj-$(CONFIG_RENESAS_RZG2L_IRQC)	+= irq-renesas-rzg2l.o
 obj-$(CONFIG_VERSATILE_FPGA_IRQ)	+= irq-versatile-fpga.o
 obj-$(CONFIG_ARCH_NSPIRE)		+= irq-zevio.o
 obj-$(CONFIG_ARCH_VT8500)		+= irq-vt8500.o