Merge tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
  some reported issues. Included in here are:

   - serial core pm runtime fix for issue reported by many

   - 8250_omap driver fix

   - rs485 spinlock fix for reported problem

   - ams-delta bugfix for previous tty api changes in -rc1 that missed
     this driver that never seems to get built in any test systems

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  ASoC: ti: ams-delta: Fix cx81801_receive() argument types
  serial: core: Fix checks for tx runtime PM state
  serial: 8250_omap: Fix errors with no_console_suspend
  serial: Reduce spinlocked portion of uart_rs485_config()

drivers/tty/serial/8250/8250_omap.c

@@ -1617,7 +1617,7 @@ static int omap8250_suspend(struct device *dev)
 {
 	struct omap8250_priv *priv = dev_get_drvdata(dev);
 	struct uart_8250_port *up = serial8250_get_port(priv->line);
-	int err;
+	int err = 0;
 
 	serial8250_suspend_port(priv->line);
 
@@ -1627,7 +1627,8 @@ static int omap8250_suspend(struct device *dev)
 	if (!device_may_wakeup(dev))
 		priv->wer = 0;
 	serial_out(up, UART_OMAP_WER, priv->wer);
-	err = pm_runtime_force_suspend(dev);
+	if (uart_console(&up->port) && console_suspend_enabled)
+		err = pm_runtime_force_suspend(dev);
 	flush_work(&priv->qos_work);
 
 	return err;
@@ -1636,11 +1637,15 @@ static int omap8250_suspend(struct device *dev)
 static int omap8250_resume(struct device *dev)
 {
 	struct omap8250_priv *priv = dev_get_drvdata(dev);
+	struct uart_8250_port *up = serial8250_get_port(priv->line);
 	int err;
 
-	err = pm_runtime_force_resume(dev);
-	if (err)
-		return err;
+	if (uart_console(&up->port) && console_suspend_enabled) {
+		err = pm_runtime_force_resume(dev);
+		if (err)
+			return err;
+	}
+
 	serial8250_resume_port(priv->line);
 	/* Paired with pm_runtime_resume_and_get() in omap8250_suspend() */
 	pm_runtime_mark_last_busy(dev);
@@ -1717,16 +1722,6 @@ static int omap8250_runtime_suspend(struct device *dev)
 
 	if (priv->line >= 0)
 		up = serial8250_get_port(priv->line);
-	/*
-	 * When using 'no_console_suspend', the console UART must not be
-	 * suspended. Since driver suspend is managed by runtime suspend,
-	 * preventing runtime suspend (by returning error) will keep device
-	 * active during suspend.
-	 */
-	if (priv->is_suspending && !console_suspend_enabled) {
-		if (up && uart_console(&up->port))
-			return -EBUSY;
-	}
 
 	if (priv->habit & UART_ERRATA_CLOCK_DISABLE) {
 		int ret;

drivers/tty/serial/serial_core.c

@@ -156,7 +156,7 @@ static void __uart_start(struct uart_state *state)
 	 * enabled, serial_port_runtime_resume() calls start_tx() again
 	 * after enabling the device.
 	 */
-	if (pm_runtime_active(&port_dev->dev))
+	if (!pm_runtime_enabled(port->dev) || pm_runtime_active(port->dev))
 		port->ops->start_tx(port);
 	pm_runtime_mark_last_busy(&port_dev->dev);
 	pm_runtime_put_autosuspend(&port_dev->dev);
@@ -1404,12 +1404,18 @@ static void uart_set_rs485_termination(struct uart_port *port,
 static int uart_rs485_config(struct uart_port *port)
 {
 	struct serial_rs485 *rs485 = &port->rs485;
+	unsigned long flags;
 	int ret;
 
+	if (!(rs485->flags & SER_RS485_ENABLED))
+		return 0;
+
 	uart_sanitize_serial_rs485(port, rs485);
 	uart_set_rs485_termination(port, rs485);
 
+	spin_lock_irqsave(&port->lock, flags);
 	ret = port->rs485_config(port, NULL, rs485);
+	spin_unlock_irqrestore(&port->lock, flags);
 	if (ret)
 		memset(rs485, 0, sizeof(*rs485));
 
@@ -2474,11 +2480,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 			if (ret == 0) {
 				if (tty)
 					uart_change_line_settings(tty, state, NULL);
+				uart_rs485_config(uport);
 				spin_lock_irq(&uport->lock);
 				if (!(uport->rs485.flags & SER_RS485_ENABLED))
 					ops->set_mctrl(uport, uport->mctrl);
-				else
-					uart_rs485_config(uport);
 				ops->start_tx(uport);
 				spin_unlock_irq(&uport->lock);
 				tty_port_set_initialized(port, true);
@@ -2587,10 +2592,10 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 		port->mctrl &= TIOCM_DTR;
 		if (!(port->rs485.flags & SER_RS485_ENABLED))
 			port->ops->set_mctrl(port, port->mctrl);
-		else
-			uart_rs485_config(port);
 		spin_unlock_irqrestore(&port->lock, flags);
 
+		uart_rs485_config(port);
+
 		/*
 		 * If this driver supports console, and it hasn't been
 		 * successfully registered yet, try to re-register it.

sound/soc/ti/ams-delta.c

@@ -336,8 +336,8 @@ static void cx81801_hangup(struct tty_struct *tty)
 }
 
 /* Line discipline .receive_buf() */
-static void cx81801_receive(struct tty_struct *tty, const u8 *cp,
-		const char *fp, int count)
+static void cx81801_receive(struct tty_struct *tty, const u8 *cp, const u8 *fp,
+			    size_t count)
 {
 	struct snd_soc_component *component = tty->disc_data;
 	const unsigned char *c;