ata: libata-scsi: rework ata_dump_status to avoid using pr_cont()

pr_cont() has the problem that individual calls will be disrupted
under high load, causing each call to end up on a single line and
thereby mangling the output.
So rework ata_dump_status() to have just one call to ata_port_warn()
and avoid this problem.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

drivers/ata/libata-scsi.c

@@ -668,7 +668,7 @@ static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
 
 /**
  *	ata_dump_status - user friendly display of error info
- *	@id: id of the port in question
+ *	@ap: the port in question
  *	@tf: ptr to filled out taskfile
  *
  *	Decode and dump the ATA error/status registers for the user so
@@ -678,37 +678,32 @@ static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
  *	LOCKING:
  *	inherited from caller
  */
-static void ata_dump_status(unsigned id, struct ata_taskfile *tf)
+static void ata_dump_status(struct ata_port *ap, struct ata_taskfile *tf)
 {
 	u8 stat = tf->command, err = tf->feature;
 
-	pr_warn("ata%u: status=0x%02x { ", id, stat);
 	if (stat & ATA_BUSY) {
-		pr_cont("Busy }\n");	/* Data is not valid in this case */
+		ata_port_warn(ap, "status=0x%02x {Busy} ", stat);
 	} else {
-		if (stat & ATA_DRDY)	pr_cont("DriveReady ");
-		if (stat & ATA_DF)	pr_cont("DeviceFault ");
-		if (stat & ATA_DSC)	pr_cont("SeekComplete ");
-		if (stat & ATA_DRQ)	pr_cont("DataRequest ");
-		if (stat & ATA_CORR)	pr_cont("CorrectedError ");
-		if (stat & ATA_SENSE)	pr_cont("Sense ");
-		if (stat & ATA_ERR)	pr_cont("Error ");
-		pr_cont("}\n");
-
-		if (err) {
-			pr_warn("ata%u: error=0x%02x { ", id, err);
-			if (err & ATA_ABORTED)	pr_cont("DriveStatusError ");
-			if (err & ATA_ICRC) {
-				if (err & ATA_ABORTED)
-						pr_cont("BadCRC ");
-				else		pr_cont("Sector ");
-			}
-			if (err & ATA_UNC)	pr_cont("UncorrectableError ");
-			if (err & ATA_IDNF)	pr_cont("SectorIdNotFound ");
-			if (err & ATA_TRK0NF)	pr_cont("TrackZeroNotFound ");
-			if (err & ATA_AMNF)	pr_cont("AddrMarkNotFound ");
-			pr_cont("}\n");
-		}
+		ata_port_warn(ap, "status=0x%02x { %s%s%s%s%s%s%s} ", stat,
+			      stat & ATA_DRDY ? "DriveReady " : "",
+			      stat & ATA_DF ? "DeviceFault " : "",
+			      stat & ATA_DSC ? "SeekComplete " : "",
+			      stat & ATA_DRQ ? "DataRequest " : "",
+			      stat & ATA_CORR ? "CorrectedError " : "",
+			      stat & ATA_SENSE ? "Sense " : "",
+			      stat & ATA_ERR ? "Error " : "");
+		if (err)
+			ata_port_warn(ap, "error=0x%02x {%s%s%s%s%s%s", err,
+				      err & ATA_ABORTED ?
+				      "DriveStatusError " : "",
+				      err & ATA_ICRC ?
+				      (err & ATA_ABORTED ?
+				       "BadCRC " : "Sector ") : "",
+				      err & ATA_UNC ? "UncorrectableError " : "",
+				      err & ATA_IDNF ? "SectorIdNotFound " : "",
+				      err & ATA_TRK0NF ? "TrackZeroNotFound " : "",
+				      err & ATA_AMNF ? "AddrMarkNotFound " : "");
 	}
 }
 
@@ -1662,7 +1657,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
 		cmd->result = SAM_STAT_GOOD;
 
 	if (need_sense && !ap->ops->error_handler)
-		ata_dump_status(ap->print_id, &qc->result_tf);
+		ata_dump_status(ap, &qc->result_tf);
 
 	ata_qc_done(qc);
 }