Commit 41dac73e authored by Varadarajan Narayanan's avatar Varadarajan Narayanan Committed by Andy Gross

arm64: dts: Add ipq8074 SoC and HK01 board support

Add initial device tree support for the Qualcomm IPQ8074 SoC and
HK01 evaluation board.
Acked-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarManoharan Vijaya Raghavan <mraghava@codeaurora.org>
Signed-off-by: default avatarAbhishek Sahu <absahu@codeaurora.org>
Signed-off-by: default avatarVaradarajan Narayanan <varada@codeaurora.org>
Signed-off-by: default avatarAndy Gross <andy.gross@linaro.org>
parent 6a6729f3
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
......
/dts-v1/;
/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "ipq8074.dtsi"
/ {
#address-cells = <0x2>;
#size-cells = <0x2>;
model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
interrupt-parent = <&intc>;
aliases {
serial0 = &blsp1_uart5;
};
chosen {
stdout-path = "serial0";
};
memory {
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
soc {
pinctrl@1000000 {
serial_4_pins: serial4_pinmux {
mux {
pins = "gpio23", "gpio24";
function = "blsp4_uart1";
bias-disable;
};
};
};
serial@78b3000 {
pinctrl-0 = <&serial_4_pins>;
pinctrl-names = "default";
status = "ok";
};
};
};
/*
* Copyright (c) 2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
/ {
model = "Qualcomm Technologies, Inc. IPQ8074";
compatible = "qcom,ipq8074";
soc: soc {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
pinctrl@1000000 {
compatible = "qcom,ipq8074-pinctrl";
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <0x2>;
interrupt-controller;
#interrupt-cells = <0x2>;
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <0x3>;
reg = <0xb000000 0x1000>, <0xb002000 0x1000>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
timer@b120000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0xb120000 0x1000>;
clock-frequency = <19200000>;
frame@b120000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb121000 0x1000>,
<0xb122000 0x1000>;
};
frame@b123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb123000 0x1000>;
status = "disabled";
};
frame@b124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb124000 0x1000>;
status = "disabled";
};
frame@b125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb125000 0x1000>;
status = "disabled";
};
frame@b126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb126000 0x1000>;
status = "disabled";
};
frame@b127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb127000 0x1000>;
status = "disabled";
};
frame@b128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb128000 0x1000>;
status = "disabled";
};
};
gcc: gcc@1800000 {
compatible = "qcom,gcc-ipq8074";
reg = <0x1800000 0x80000>;
#clock-cells = <0x1>;
#reset-cells = <0x1>;
};
blsp1_uart5: serial@78b3000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78b3000 0x200>;
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
};
cpus {
#address-cells = <0x1>;
#size-cells = <0x0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0>;
next-level-cache = <&L2_0>;
enable-method = "psci";
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
enable-method = "psci";
reg = <0x1>;
next-level-cache = <&L2_0>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
enable-method = "psci";
reg = <0x2>;
next-level-cache = <&L2_0>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
enable-method = "psci";
reg = <0x3>;
next-level-cache = <&L2_0>;
};
L2_0: l2-cache {
compatible = "cache";
cache-level = <0x2>;
};
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>;
};
clocks {
sleep_clk: sleep_clk {
compatible = "fixed-clock";
clock-frequency = <32000>;
#clock-cells = <0>;
};
xo: xo {
compatible = "fixed-clock";
clock-frequency = <19200000>;
#clock-cells = <0>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment