drm/i915: Rename variables to be consistent with bspec

Since the code seems insistent on using the variable names from the
bspec formulat, let's be consistent and use those names for all
the things. For some reason 'link_clk' and 'lanes' were left out
in the code until now.

Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429185457.26235-2-ville.syrjala@linux.intel.comReviewed-by: Uma Shankar <uma.shankar@intel.com>

drivers/gpu/drm/i915/display/intel_audio.c

@@ -526,6 +526,7 @@ static unsigned int get_hblank_early_enable_config(struct intel_encoder *encoder
 	unsigned int hblank_rise, hblank_early_prog;
 	unsigned int h_active, h_total, hblank_delta, pixel_clk;
 	unsigned int fec_coeff, cdclk, vdsc_bpp;
+	unsigned int link_clk, lanes;
 
 	h_active = crtc_state->hw.adjusted_mode.crtc_hdisplay;
 	h_total = crtc_state->hw.adjusted_mode.crtc_htotal;
@@ -534,40 +535,40 @@ static unsigned int get_hblank_early_enable_config(struct intel_encoder *encoder
 	cdclk = i915->cdclk.hw.cdclk;
 	/* fec= 0.972261, using rounding multiplier of 1000000 */
 	fec_coeff = 972261;
+	link_clk = crtc_state->port_clock;
+	lanes = crtc_state->lane_count;
 
 	drm_dbg_kms(&i915->drm, "h_active = %u link_clk = %u :"
 		    "lanes = %u vdsc_bpp = %u cdclk = %u\n",
-		    h_active, crtc_state->port_clock, crtc_state->lane_count,
-		    vdsc_bpp, cdclk);
+		    h_active, link_clk, lanes, vdsc_bpp, cdclk);
 
-	if (WARN_ON(!crtc_state->port_clock || !crtc_state->lane_count ||
-		    !crtc_state->dsc.compressed_bpp || !i915->cdclk.hw.cdclk))
+	if (WARN_ON(!link_clk || !lanes || !vdsc_bpp || !cdclk))
 		return 0;
 
 	link_clks_available = ((((h_total - h_active) *
-			       ((crtc_state->port_clock * ROUNDING_FACTOR) /
+			       ((link_clk * ROUNDING_FACTOR) /
 				pixel_clk)) / ROUNDING_FACTOR) - 28);
 	link_clks_required = DIV_ROUND_UP(192000, (1000 * pixel_clk / h_total)) * ((48 /
-					  crtc_state->lane_count) + 2);
+					  lanes) + 2);
 
 	if (link_clks_available > link_clks_required)
 		hblank_delta = 32;
 	else
 		hblank_delta = DIV_ROUND_UP(((((5 * ROUNDING_FACTOR) /
-					    crtc_state->port_clock) + ((5 *
+					    link_clk) + ((5 *
 					    ROUNDING_FACTOR) /
 					    cdclk)) * pixel_clk),
 					    ROUNDING_FACTOR);
 
-	tu_data = (pixel_clk * vdsc_bpp * 8) / ((crtc_state->port_clock *
-		   crtc_state->lane_count * fec_coeff) / 1000000);
-	tu_line = (((h_active * crtc_state->port_clock * fec_coeff) /
+	tu_data = (pixel_clk * vdsc_bpp * 8) / ((link_clk *
+		   lanes * fec_coeff) / 1000000);
+	tu_line = (((h_active * link_clk * fec_coeff) /
 		   1000000) / (64 * pixel_clk));
 	link_clks_active  = (tu_line - 1) * 64 + tu_data;
 
 	hblank_rise = ((link_clks_active + 6 * DIV_ROUND_UP(link_clks_active,
 			250) + 4) * ((pixel_clk * ROUNDING_FACTOR) /
-			crtc_state->port_clock)) / ROUNDING_FACTOR;
+			link_clk)) / ROUNDING_FACTOR;
 
 	hblank_early_prog = h_active - hblank_rise + hblank_delta;
 
@@ -577,16 +578,19 @@ static unsigned int get_hblank_early_enable_config(struct intel_encoder *encoder
 static unsigned int get_sample_room_req_config(const struct intel_crtc_state *crtc_state)
 {
 	unsigned int h_active, h_total, pixel_clk;
+	unsigned int link_clk, lanes;
 	unsigned int samples_room;
 
 	h_active = crtc_state->hw.adjusted_mode.hdisplay;
 	h_total = crtc_state->hw.adjusted_mode.htotal;
 	pixel_clk = crtc_state->hw.adjusted_mode.clock;
+	link_clk = crtc_state->port_clock;
+	lanes = crtc_state->lane_count;
 
-	samples_room = ((((h_total - h_active) * ((crtc_state->port_clock *
+	samples_room = ((((h_total - h_active) * ((link_clk *
 			ROUNDING_FACTOR) / pixel_clk)) /
 			ROUNDING_FACTOR) - 12) / ((48 /
-			crtc_state->lane_count) + 2);
+			lanes) + 2);
 
 	return samples_room;
 }