drm/panel: Add driver for BOE TH101MB31IG002-28A panel

The BOE TH101MB31IG002-28A panel is a WXGA panel.
It is used in Pine64 PineTab2 and PineTab-V.
Signed-off-by: Alexander Warnecke <awarnecke002@hotmail.com>
Signed-off-by: Manuel Traut <manut@mecka.net>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20240102-pinetab2-v3-2-cb1aa69f8c30@mecka.netSigned-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102-pinetab2-v3-2-cb1aa69f8c30@mecka.net

drivers/gpu/drm/panel/Kconfig

@@ -67,6 +67,17 @@ config DRM_PANEL_BOE_HIMAX8279D
 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
 	  the host and has a built-in LED backlight.
 
+config DRM_PANEL_BOE_TH101MB31UIG002_28A
+	tristate "Boe TH101MB31UIG002-28A panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Boe
+	  TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
+	  resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
+	  interface to the host and has a built-in LED backlight.
+
 config DRM_PANEL_BOE_TV101WUM_NL6
 	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
 	depends on OF

drivers/gpu/drm/panel/Makefile

@@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.
 obj-$(CONFIG_DRM_PANEL_AUO_A030JTN01) += panel-auo-a030jtn01.o
 obj-$(CONFIG_DRM_PANEL_BOE_BF060Y8M_AJ0) += panel-boe-bf060y8m-aj0.o
 obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
+obj-$(CONFIG_DRM_PANEL_BOE_TH101MB31UIG002_28A) += panel-boe-th101mb31ig002-28a.o
 obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
 obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o

drivers/gpu/drm/panel/panel-boe-th101mb31ig002-28a.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023 Alexander Warnecke <awarnecke002@hotmail.com>
+ * Copyright (c) 2023 Manuel Traut <manut@mecka.net>
+ * Copyright (c) 2023 Dang Huynh <danct12@riseup.net>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_connector.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct boe_th101mb31ig002 {
+	struct drm_panel panel;
+
+	struct mipi_dsi_device *dsi;
+
+	struct regulator *power;
+	struct gpio_desc *enable;
+	struct gpio_desc *reset;
+
+	enum drm_panel_orientation orientation;
+};
+
+static void boe_th101mb31ig002_reset(struct boe_th101mb31ig002 *ctx)
+{
+	gpiod_direction_output(ctx->reset, 0);
+	usleep_range(10, 100);
+	gpiod_direction_output(ctx->reset, 1);
+	usleep_range(10, 100);
+	gpiod_direction_output(ctx->reset, 0);
+	usleep_range(5000, 6000);
+}
+
+static int boe_th101mb31ig002_enable(struct drm_panel *panel)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	mipi_dsi_dcs_write_seq(dsi, 0xE0, 0xAB, 0xBA);
+	mipi_dsi_dcs_write_seq(dsi, 0xE1, 0xBA, 0xAB);
+	mipi_dsi_dcs_write_seq(dsi, 0xB1, 0x10, 0x01, 0x47, 0xFF);
+	mipi_dsi_dcs_write_seq(dsi, 0xB2, 0x0C, 0x14, 0x04, 0x50, 0x50, 0x14);
+	mipi_dsi_dcs_write_seq(dsi, 0xB3, 0x56, 0x53, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xB4, 0x33, 0x30, 0x04);
+	mipi_dsi_dcs_write_seq(dsi, 0xB6, 0xB0, 0x00, 0x00, 0x10, 0x00, 0x10,
+				    0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xB8, 0x05, 0x12, 0x29, 0x49, 0x48, 0x00,
+				    0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xB9, 0x7C, 0x65, 0x55, 0x49, 0x46, 0x36,
+				    0x3B, 0x24, 0x3D, 0x3C, 0x3D, 0x5C, 0x4C,
+				    0x55, 0x47, 0x46, 0x39, 0x26, 0x06, 0x7C,
+				    0x65, 0x55, 0x49, 0x46, 0x36, 0x3B, 0x24,
+				    0x3D, 0x3C, 0x3D, 0x5C, 0x4C, 0x55, 0x47,
+				    0x46, 0x39, 0x26, 0x06);
+	mipi_dsi_dcs_write_seq(dsi, 0x00, 0xFF, 0x87, 0x12, 0x34, 0x44, 0x44,
+				    0x44, 0x44, 0x98, 0x04, 0x98, 0x04, 0x0F,
+				    0x00, 0x00, 0xC1);
+	mipi_dsi_dcs_write_seq(dsi, 0xC1, 0x54, 0x94, 0x02, 0x85, 0x9F, 0x00,
+				    0x7F, 0x00, 0x54, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xC2, 0x17, 0x09, 0x08, 0x89, 0x08, 0x11,
+				    0x22, 0x20, 0x44, 0xFF, 0x18, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xC3, 0x86, 0x46, 0x05, 0x05, 0x1C, 0x1C,
+				    0x1D, 0x1D, 0x02, 0x1F, 0x1F, 0x1E, 0x1E,
+				    0x0F, 0x0F, 0x0D, 0x0D, 0x13, 0x13, 0x11,
+				    0x11, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xC4, 0x07, 0x07, 0x04, 0x04, 0x1C, 0x1C,
+				    0x1D, 0x1D, 0x02, 0x1F, 0x1F, 0x1E, 0x1E,
+				    0x0E, 0x0E, 0x0C, 0x0C, 0x12, 0x12, 0x10,
+				    0x10, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xC6, 0x2A, 0x2A);
+	mipi_dsi_dcs_write_seq(dsi, 0xC8, 0x21, 0x00, 0x31, 0x42, 0x34, 0x16);
+	mipi_dsi_dcs_write_seq(dsi, 0xCA, 0xCB, 0x43);
+	mipi_dsi_dcs_write_seq(dsi, 0xCD, 0x0E, 0x4B, 0x4B, 0x20, 0x19, 0x6B,
+				    0x06, 0xB3);
+	mipi_dsi_dcs_write_seq(dsi, 0xD2, 0xE3, 0x2B, 0x38, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xD4, 0x00, 0x01, 0x00, 0x0E, 0x04, 0x44,
+				    0x08, 0x10, 0x00, 0x00, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xE6, 0x80, 0x01, 0xFF, 0xFF, 0xFF, 0xFF,
+				    0xFF, 0xFF);
+	mipi_dsi_dcs_write_seq(dsi, 0xF0, 0x12, 0x03, 0x20, 0x00, 0xFF);
+	mipi_dsi_dcs_write_seq(dsi, 0xF3, 0x00);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+
+	msleep(120);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set panel on: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int boe_th101mb31ig002_disable(struct drm_panel *panel)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0)
+		dev_err(dev, "Failed to set panel off: %d\n", ret);
+
+	msleep(120);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0)
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+
+	return 0;
+}
+
+static int boe_th101mb31ig002_unprepare(struct drm_panel *panel)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+
+	gpiod_set_value_cansleep(ctx->reset, 1);
+	gpiod_set_value_cansleep(ctx->enable, 0);
+	regulator_disable(ctx->power);
+
+	return 0;
+}
+
+static int boe_th101mb31ig002_prepare(struct drm_panel *panel)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	ret = regulator_enable(ctx->power);
+	if (ret) {
+		dev_err(dev, "Failed to enable power supply: %d\n", ret);
+		return ret;
+	}
+
+	gpiod_set_value_cansleep(ctx->enable, 1);
+	msleep(50);
+	boe_th101mb31ig002_reset(ctx);
+	boe_th101mb31ig002_enable(panel);
+
+	return 0;
+}
+
+static const struct drm_display_mode boe_th101mb31ig002_default_mode = {
+	.clock		= 73500,
+	.hdisplay	= 800,
+	.hsync_start	= 800 + 64,
+	.hsync_end	= 800 + 64 + 16,
+	.htotal		= 800 + 64 + 16 + 64,
+	.vdisplay	= 1280,
+	.vsync_start	= 1280 + 2,
+	.vsync_end	= 1280 + 2 + 4,
+	.vtotal		= 1280 + 2 + 4 + 12,
+	.width_mm	= 135,
+	.height_mm	= 216,
+	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static int boe_th101mb31ig002_get_modes(struct drm_panel *panel,
+					struct drm_connector *connector)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev,
+				  &boe_th101mb31ig002_default_mode);
+	if (!mode) {
+		dev_err(panel->dev, "Failed to add mode %ux%u@%u\n",
+			boe_th101mb31ig002_default_mode.hdisplay,
+			boe_th101mb31ig002_default_mode.vdisplay,
+			drm_mode_vrefresh(&boe_th101mb31ig002_default_mode));
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	connector->display_info.bpc = 8;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+
+	/*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
+	drm_connector_set_panel_orientation(connector, ctx->orientation);
+
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static enum drm_panel_orientation
+boe_th101mb31ig002_get_orientation(struct drm_panel *panel)
+{
+	struct boe_th101mb31ig002 *ctx = container_of(panel,
+						      struct boe_th101mb31ig002,
+						      panel);
+
+	return ctx->orientation;
+}
+
+static const struct drm_panel_funcs boe_th101mb31ig002_funcs = {
+	.prepare = boe_th101mb31ig002_prepare,
+	.unprepare = boe_th101mb31ig002_unprepare,
+	.disable = boe_th101mb31ig002_disable,
+	.get_modes = boe_th101mb31ig002_get_modes,
+	.get_orientation = boe_th101mb31ig002_get_orientation,
+};
+
+static int boe_th101mb31ig002_dsi_probe(struct mipi_dsi_device *dsi)
+{
+	struct boe_th101mb31ig002 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+	ctx->dsi = dsi;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_NO_EOT_PACKET |
+			  MIPI_DSI_MODE_LPM;
+
+	ctx->power = devm_regulator_get(&dsi->dev, "power");
+	if (IS_ERR(ctx->power))
+		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->power),
+				     "Failed to get power regulator\n");
+
+	ctx->enable = devm_gpiod_get(&dsi->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->enable))
+		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->enable),
+				     "Failed to get enable GPIO\n");
+
+	ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset))
+		return dev_err_probe(&dsi->dev, PTR_ERR(ctx->reset),
+				     "Failed to get reset GPIO\n");
+
+	ret = of_drm_get_panel_orientation(dsi->dev.of_node,
+					   &ctx->orientation);
+	if (ret)
+		return dev_err_probe(&dsi->dev, ret,
+				     "Failed to get orientation\n");
+
+	drm_panel_init(&ctx->panel, &dsi->dev, &boe_th101mb31ig002_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return ret;
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err_probe(&dsi->dev, ret,
+			      "Failed to attach panel to DSI host\n");
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void boe_th101mb31ig002_dsi_remove(struct mipi_dsi_device *dsi)
+{
+	struct boe_th101mb31ig002 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id boe_th101mb31ig002_of_match[] = {
+	{ .compatible = "boe,th101mb31ig002-28a", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, boe_th101mb31ig002_of_match);
+
+static struct mipi_dsi_driver boe_th101mb31ig002_driver = {
+	.driver = {
+		.name = "boe-th101mb31ig002-28a",
+		.of_match_table = boe_th101mb31ig002_of_match,
+	},
+	.probe = boe_th101mb31ig002_dsi_probe,
+	.remove = boe_th101mb31ig002_dsi_remove,
+};
+module_mipi_dsi_driver(boe_th101mb31ig002_driver);
+
+MODULE_AUTHOR("Alexander Warnecke <awarnecke002@hotmail.com>");
+MODULE_DESCRIPTION("BOE TH101MB31IG002-28A MIPI-DSI LCD panel");
+MODULE_LICENSE("GPL");