Commit 422a2952 authored by Taniya Das's avatar Taniya Das Committed by Bjorn Andersson

arm64: dts: qcom: sc7280: Add clock controller nodes

Add support for the video, gpu, display, lpass clock controller
device nodes for SC7280 SoC.
Signed-off-by: default avatarTaniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1618020280-5470-3-git-send-email-tdas@codeaurora.org
[bjorn: Dropped includes, as they are not present in v5.13-rc1]
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 7dbd121a
......@@ -333,6 +333,31 @@ uart5: serial@994000 {
};
};
lpasscc: lpasscc@3000000 {
compatible = "qcom,sc7280-lpasscc";
reg = <0 0x03000000 0 0x40>,
<0 0x03c04000 0 0x4>,
<0 0x03389000 0 0x24>;
reg-names = "qdsp6ss", "top_cc", "cc";
clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
clock-names = "iface";
#clock-cells = <1>;
};
gpucc: clock-controller@3d90000 {
compatible = "qcom,sc7280-gpucc";
reg = <0 0x03d90000 0 0x9000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
clock-names = "bi_tcxo",
"gcc_gpu_gpll0_clk_src",
"gcc_gpu_gpll0_div_clk_src";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
stm@6002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0 0x06002000 0 0x1000>,
......@@ -829,6 +854,35 @@ system-cache-controller@9200000 {
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
videocc: clock-controller@aaf0000 {
compatible = "qcom,sc7280-videocc";
reg = <0 0xaaf0000 0 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>;
clock-names = "bi_tcxo", "bi_tcxo_ao";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
dispcc: clock-controller@af00000 {
compatible = "qcom,sc7280-dispcc";
reg = <0 0xaf00000 0 0x20000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<0>, <0>, <0>, <0>, <0>, <0>;
clock-names = "bi_tcxo", "gcc_disp_gpll0_clk",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
"dp_phy_pll_link_clk",
"dp_phy_pll_vco_div_clk",
"edp_phy_pll_link_clk",
"edp_phy_pll_vco_div_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc7280-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment