Commit 428ab280 authored by Ralf Baechle's avatar Ralf Baechle

[MIPS] SMP: Scatter __cpuinit over the code as needed.

MIPS doesn't do CPU hotplugging yet but since many of the functions don't
even have an __init let's fix this right.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent d98cc84d
......@@ -287,7 +287,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
* (unsigned long)idle->thread_info the gp
* assumes a 1:1 mapping of TC => VPE
*/
void prom_boot_secondary(int cpu, struct task_struct *idle)
void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
{
struct thread_info *gp = task_thread_info(idle);
dvpe();
......@@ -321,7 +321,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
evpe(EVPE_ENABLE);
}
void prom_init_secondary(void)
void __cpuinit prom_init_secondary(void)
{
/* Enable per-cpu interrupts */
......@@ -330,7 +330,7 @@ void prom_init_secondary(void)
(STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
}
void prom_smp_finish(void)
void __cpuinit prom_smp_finish(void)
{
write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
......
......@@ -24,7 +24,7 @@ void core_send_ipi(int cpu, unsigned int action)
* Platform "CPU" startup hook
*/
void prom_boot_secondary(int cpu, struct task_struct *idle)
void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
{
smtc_boot_secondary(cpu, idle);
}
......@@ -33,7 +33,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
* Post-config but pre-boot cleanup entry point
*/
void prom_init_secondary(void)
void __cpuinit prom_init_secondary(void)
{
void smtc_init_secondary(void);
int myvpe;
......@@ -75,7 +75,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
* SMP initialization finalization entry point
*/
void prom_smp_finish(void)
void __cpuinit prom_smp_finish(void)
{
smtc_smp_finish();
}
......
......@@ -53,7 +53,7 @@ void core_send_ipi(int cpu, unsigned int action)
* Platform "CPU" startup hook
*/
void prom_boot_secondary(int cpu, struct task_struct *idle)
void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
{
#ifdef CONFIG_MIPS_MT_SMTC
smtc_boot_secondary(cpu, idle);
......@@ -64,7 +64,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
* Post-config but pre-boot cleanup entry point
*/
void prom_init_secondary(void)
void __cpuinit prom_init_secondary(void)
{
#ifdef CONFIG_MIPS_MT_SMTC
void smtc_init_secondary(void);
......@@ -103,7 +103,7 @@ void plat_prepare_cpus(unsigned int max_cpus)
* SMP initialization finalization entry point
*/
void prom_smp_finish(void)
void __cpuinit prom_smp_finish(void)
{
#ifdef CONFIG_MIPS_MT_SMTC
smtc_smp_finish();
......
......@@ -77,7 +77,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
* stack so the first thing we do is throw away that stuff and load useful
* values into the registers ...
*/
void __init prom_boot_secondary(int cpu, struct task_struct *idle)
void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
{
unsigned long gp = (unsigned long) task_thread_info(idle);
unsigned long sp = __KSTK_TOS(idle);
......@@ -97,12 +97,12 @@ void prom_cpus_done(void)
* After we've done initial boot, this function is called to allow the
* board code to clean up state, if needed
*/
void prom_init_secondary(void)
void __cpuinit prom_init_secondary(void)
{
set_c0_status(ST0_CO | ST0_IE | ST0_IM);
}
void prom_smp_finish(void)
void __cpuinit prom_smp_finish(void)
{
}
......
......@@ -22,11 +22,11 @@ void core_send_ipi(int cpu, unsigned int action)
* After we've done initial boot, this function is called to allow the
* board code to clean up state, if needed
*/
void prom_init_secondary(void)
void __cpuinit prom_init_secondary(void)
{
}
void prom_smp_finish(void)
void __cpuinit prom_smp_finish(void)
{
}
......@@ -43,7 +43,7 @@ void __init prom_prepare_cpus(unsigned int max_cpus)
/*
* Firmware CPU startup hook
*/
void prom_boot_secondary(int cpu, struct task_struct *idle)
void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
{
}
......
......@@ -171,7 +171,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
* set sp to the kernel stack of the newly created idle process, gp to the proc
* struct so that current_thread_info() will work.
*/
void __init prom_boot_secondary(int cpu, struct task_struct *idle)
void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
{
unsigned long gp = (unsigned long)task_thread_info(idle);
unsigned long sp = __KSTK_TOS(idle);
......@@ -191,7 +191,7 @@ void __init prom_cpus_done(void)
{
}
void prom_smp_finish(void)
void __cpuinit prom_smp_finish(void)
{
}
......
......@@ -58,7 +58,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
* Setup the PC, SP, and GP of a secondary processor and start it
* running!
*/
void prom_boot_secondary(int cpu, struct task_struct *idle)
void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
{
int retval;
......@@ -72,7 +72,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
/*
* Code to run on secondary just after probing the CPU
*/
void prom_init_secondary(void)
void __cpuinit prom_init_secondary(void)
{
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
extern void bcm1480_smp_init(void);
......@@ -89,7 +89,7 @@ void prom_init_secondary(void)
* Do any tidying up before marking online and running the idle
* loop
*/
void prom_smp_finish(void)
void __cpuinit prom_smp_finish(void)
{
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
extern void bcm1480_smp_finish(void);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment