habanalabs: add a lock to protect multiple reset variables

Atomic operations during reset are replaced by a spinlock in order
to have the ability to protect more than a single variable.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

drivers/misc/habanalabs/common/command_buffer.c

@@ -250,8 +250,7 @@ int hl_cb_create(struct hl_device *hdev, struct hl_cb_mgr *mgr,
 	 * Can't use generic function to check this because of special case
 	 * where we create a CB as part of the reset process
 	 */
-	if ((hdev->disabled) || ((atomic_read(&hdev->reset_info.in_reset)) &&
-					(ctx_id != HL_KERNEL_ASID_ID))) {
+	if ((hdev->disabled) || (hdev->reset_info.in_reset && (ctx_id != HL_KERNEL_ASID_ID))) {
 		dev_warn_ratelimited(hdev->dev,
 			"Device is disabled or in reset. Can't create new CBs\n");
 		rc = -EBUSY;

drivers/misc/habanalabs/common/debugfs.c

@@ -527,7 +527,7 @@ static int engines_show(struct seq_file *s, void *data)
 	struct hl_dbg_device_entry *dev_entry = entry->dev_entry;
 	struct hl_device *hdev = dev_entry->hdev;
 
-	if (atomic_read(&hdev->reset_info.in_reset)) {
+	if (hdev->reset_info.in_reset) {
 		dev_warn_ratelimited(hdev->dev,
 				"Can't check device idle during reset\n");
 		return 0;
@@ -658,7 +658,7 @@ static ssize_t hl_data_read32(struct file *f, char __user *buf,
 	ssize_t rc;
 	u32 val;
 
-	if (atomic_read(&hdev->reset_info.in_reset)) {
+	if (hdev->reset_info.in_reset) {
 		dev_warn_ratelimited(hdev->dev, "Can't read during reset\n");
 		return 0;
 	}
@@ -694,7 +694,7 @@ static ssize_t hl_data_write32(struct file *f, const char __user *buf,
 	u32 value;
 	ssize_t rc;
 
-	if (atomic_read(&hdev->reset_info.in_reset)) {
+	if (hdev->reset_info.in_reset) {
 		dev_warn_ratelimited(hdev->dev, "Can't write during reset\n");
 		return 0;
 	}
@@ -731,7 +731,7 @@ static ssize_t hl_data_read64(struct file *f, char __user *buf,
 	ssize_t rc;
 	u64 val;
 
-	if (atomic_read(&hdev->reset_info.in_reset)) {
+	if (hdev->reset_info.in_reset) {
 		dev_warn_ratelimited(hdev->dev, "Can't read during reset\n");
 		return 0;
 	}
@@ -767,7 +767,7 @@ static ssize_t hl_data_write64(struct file *f, const char __user *buf,
 	u64 value;
 	ssize_t rc;
 
-	if (atomic_read(&hdev->reset_info.in_reset)) {
+	if (hdev->reset_info.in_reset) {
 		dev_warn_ratelimited(hdev->dev, "Can't write during reset\n");
 		return 0;
 	}
@@ -802,7 +802,7 @@ static ssize_t hl_dma_size_write(struct file *f, const char __user *buf,
 	ssize_t rc;
 	u32 size;
 
-	if (atomic_read(&hdev->reset_info.in_reset)) {
+	if (hdev->reset_info.in_reset) {
 		dev_warn_ratelimited(hdev->dev, "Can't DMA during reset\n");
 		return 0;
 	}
@@ -1077,7 +1077,7 @@ static ssize_t hl_clk_gate_write(struct file *f, const char __user *buf,
 	u64 value;
 	ssize_t rc;
 
-	if (atomic_read(&hdev->reset_info.in_reset)) {
+	if (hdev->reset_info.in_reset) {
 		dev_warn_ratelimited(hdev->dev,
 				"Can't change clock gating during reset\n");
 		return 0;
@@ -1119,7 +1119,7 @@ static ssize_t hl_stop_on_err_write(struct file *f, const char __user *buf,
 	u32 value;
 	ssize_t rc;
 
-	if (atomic_read(&hdev->reset_info.in_reset)) {
+	if (hdev->reset_info.in_reset) {
 		dev_warn_ratelimited(hdev->dev,
 				"Can't change stop on error during reset\n");
 		return 0;

drivers/misc/habanalabs/common/device.c

@@ -17,7 +17,7 @@ enum hl_device_status hl_device_status(struct hl_device *hdev)
 {
 	enum hl_device_status status;
 
-	if (atomic_read(&hdev->reset_info.in_reset))
+	if (hdev->reset_info.in_reset)
 		status = HL_DEVICE_STATUS_IN_RESET;
 	else if (hdev->reset_info.needs_reset)
 		status = HL_DEVICE_STATUS_NEEDS_RESET;
@@ -448,11 +448,11 @@ static int device_early_init(struct hl_device *hdev)
 	mutex_init(&hdev->debug_lock);
 	INIT_LIST_HEAD(&hdev->cs_mirror_list);
 	spin_lock_init(&hdev->cs_mirror_lock);
+	spin_lock_init(&hdev->reset_info.lock);
 	INIT_LIST_HEAD(&hdev->fpriv_list);
 	INIT_LIST_HEAD(&hdev->fpriv_ctrl_list);
 	mutex_init(&hdev->fpriv_list_lock);
 	mutex_init(&hdev->fpriv_ctrl_list_lock);
-	atomic_set(&hdev->reset_info.in_reset, 0);
 	mutex_init(&hdev->clk_throttling.lock);
 
 	return 0;
@@ -544,7 +544,7 @@ static void hl_device_heartbeat(struct work_struct *work)
 	 * status for at least one heartbeat. From this point driver restarts
 	 * tracking future consecutive fatal errors.
 	 */
-	if (!(atomic_read(&hdev->reset_info.in_reset)))
+	if (!hdev->reset_info.in_reset)
 		hdev->reset_info.prev_reset_trigger = HL_RESET_TRIGGER_DEFAULT;
 
 	schedule_delayed_work(&hdev->work_heartbeat,
@@ -722,11 +722,14 @@ int hl_device_suspend(struct hl_device *hdev)
 	pci_save_state(hdev->pdev);
 
 	/* Block future CS/VM/JOB completion operations */
-	rc = atomic_cmpxchg(&hdev->reset_info.in_reset, 0, 1);
-	if (rc) {
+	spin_lock(&hdev->reset_info.lock);
+	if (hdev->reset_info.in_reset) {
+		spin_unlock(&hdev->reset_info.lock);
 		dev_err(hdev->dev, "Can't suspend while in reset\n");
 		return -EIO;
 	}
+	hdev->reset_info.in_reset = 1;
+	spin_unlock(&hdev->reset_info.lock);
 
 	/* This blocks all other stuff that is not blocked by in_reset */
 	hdev->disabled = true;
@@ -776,8 +779,10 @@ int hl_device_resume(struct hl_device *hdev)
 	}
 
 
-	hdev->disabled = false;
-	atomic_set(&hdev->reset_info.in_reset, 0);
+	/* 'in_reset' was set to true during suspend, now we must clear it in order
+	 * for hard reset to be performed
+	 */
+	hdev->reset_info.in_reset = 0;
 
 	rc = hl_device_reset(hdev, HL_DRV_RESET_HARD);
 	if (rc) {
@@ -1024,9 +1029,13 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
 	 */
 	if (!from_hard_reset_thread) {
 		/* Block future CS/VM/JOB completion operations */
-		rc = atomic_cmpxchg(&hdev->reset_info.in_reset, 0, 1);
-		if (rc)
+		spin_lock(&hdev->reset_info.lock);
+		if (hdev->reset_info.in_reset) {
+			spin_unlock(&hdev->reset_info.lock);
 			return 0;
+		}
+		hdev->reset_info.in_reset = 1;
+		spin_unlock(&hdev->reset_info.lock);
 
 		handle_reset_trigger(hdev, flags);
 
@@ -1234,7 +1243,7 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
 		}
 	}
 
-	atomic_set(&hdev->reset_info.in_reset, 0);
+	hdev->reset_info.in_reset = 0;
 	hdev->reset_info.needs_reset = false;
 
 	dev_notice(hdev->dev, "Successfully finished resetting the device\n");
@@ -1272,7 +1281,7 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
 		goto again;
 	}
 
-	atomic_set(&hdev->reset_info.in_reset, 0);
+	hdev->reset_info.in_reset = 0;
 
 	return rc;
 }
@@ -1583,6 +1592,7 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
  */
 void hl_device_fini(struct hl_device *hdev)
 {
+	bool device_in_reset;
 	ktime_t timeout;
 	u64 reset_sec;
 	int i, rc;
@@ -1606,10 +1616,22 @@ void hl_device_fini(struct hl_device *hdev)
 	 */
 
 	timeout = ktime_add_us(ktime_get(), reset_sec * 1000 * 1000);
-	rc = atomic_cmpxchg(&hdev->reset_info.in_reset, 0, 1);
-	while (rc) {
+
+	spin_lock(&hdev->reset_info.lock);
+	device_in_reset = !!hdev->reset_info.in_reset;
+	if (!device_in_reset)
+		hdev->reset_info.in_reset = 1;
+	spin_unlock(&hdev->reset_info.lock);
+
+	while (device_in_reset) {
 		usleep_range(50, 200);
-		rc = atomic_cmpxchg(&hdev->reset_info.in_reset, 0, 1);
+
+		spin_lock(&hdev->reset_info.lock);
+		device_in_reset = !!hdev->reset_info.in_reset;
+		if (!device_in_reset)
+			hdev->reset_info.in_reset = 1;
+		spin_unlock(&hdev->reset_info.lock);
+
 		if (ktime_compare(ktime_get(), timeout) > 0) {
 			dev_crit(hdev->dev,
 				"Failed to remove device because reset function did not finish\n");

drivers/misc/habanalabs/common/habanalabs.h

@@ -2457,9 +2457,10 @@ struct last_error_session_info {
 
 /**
  * struct hl_reset_info - holds current device reset information.
- * @in_reset: is device in reset flow.
+ * @lock: lock to protect critical reset flows.
  * @soft_reset_cnt: number of soft reset since the driver was loaded.
  * @hard_reset_cnt: number of hard reset since the driver was loaded.
+ * @in_reset: is device in reset flow.
  * @is_in_soft_reset: Device is currently in soft reset process.
  * @needs_reset: true if reset_on_lockup is false and device should be reset
  *               due to lockup.
@@ -2474,9 +2475,10 @@ struct last_error_session_info {
  *                         complete instead.
  */
 struct hl_reset_info {
-	atomic_t	in_reset;
+	spinlock_t	lock;
 	u32		soft_reset_cnt;
 	u32		hard_reset_cnt;
+	u8		in_reset;
 	u8		is_in_soft_reset;
 	u8		needs_reset;
 	u8		hard_reset_pending;