gpio: mvebu: Fix check for pwm support on non-A8K platforms

pwm support incompatible with Armada 80x0/70x0 API is not only in
Armada 370, but also in Armada XP, 38x and 39x. So basically every non-A8K
platform. Fix check for pwm support appropriately.

Fixes: 85b7d8ab ("gpio: mvebu: add pwm support for Armada 8K/7K")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

drivers/gpio/gpio-mvebu.c

@@ -790,8 +790,12 @@ static int mvebu_pwm_probe(struct platform_device *pdev,
 	u32 offset;
 	u32 set;
 
-	if (of_device_is_compatible(mvchip->chip.of_node,
-				    "marvell,armada-370-gpio")) {
+	if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K) {
+		int ret = of_property_read_u32(dev->of_node,
+					       "marvell,pwm-offset", &offset);
+		if (ret < 0)
+			return 0;
+	} else {
 		/*
 		 * There are only two sets of PWM configuration registers for
 		 * all the GPIO lines on those SoCs which this driver reserves
@@ -801,13 +805,6 @@ static int mvebu_pwm_probe(struct platform_device *pdev,
 		if (!platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"))
 			return 0;
 		offset = 0;
-	} else if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K) {
-		int ret = of_property_read_u32(dev->of_node,
-					       "marvell,pwm-offset", &offset);
-		if (ret < 0)
-			return 0;
-	} else {
-		return 0;
 	}
 
 	if (IS_ERR(mvchip->clk))