Commit 433a915f authored by Byungho Min's avatar Byungho Min Committed by Ben Dooks

ARM: S5PC100: UART and Serial

Serial driver of S5PC100 is the same as S3C6400, so S5PC100 shares the serial
driver with S3C6400. Uart driver is copied from plat-s3c64xx to plat-s5pc1xx,
as I do not use plat-s3c64xx directory.
Signed-off-by: default avatarByungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: title fixup]
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent ff54b457
/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* Based on plat-s3c64xx/dev-uart.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <plat/devs.h>
/* Serial port registrations */
/* 64xx uarts are closer together */
static struct resource s5pc1xx_uart0_resource[] = {
[0] = {
.start = S3C_PA_UART0,
.end = S3C_PA_UART0 + 0x100,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX0,
.end = IRQ_S3CUART_RX0,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX0,
.end = IRQ_S3CUART_TX0,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR0,
.end = IRQ_S3CUART_ERR0,
.flags = IORESOURCE_IRQ,
}
};
static struct resource s5pc1xx_uart1_resource[] = {
[0] = {
.start = S3C_PA_UART1,
.end = S3C_PA_UART1 + 0x100,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX1,
.end = IRQ_S3CUART_RX1,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX1,
.end = IRQ_S3CUART_TX1,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR1,
.end = IRQ_S3CUART_ERR1,
.flags = IORESOURCE_IRQ,
},
};
static struct resource s5pc1xx_uart2_resource[] = {
[0] = {
.start = S3C_PA_UART2,
.end = S3C_PA_UART2 + 0x100,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX2,
.end = IRQ_S3CUART_RX2,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX2,
.end = IRQ_S3CUART_TX2,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR2,
.end = IRQ_S3CUART_ERR2,
.flags = IORESOURCE_IRQ,
},
};
static struct resource s5pc1xx_uart3_resource[] = {
[0] = {
.start = S3C_PA_UART3,
.end = S3C_PA_UART3 + 0x100,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_S3CUART_RX3,
.end = IRQ_S3CUART_RX3,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_S3CUART_TX3,
.end = IRQ_S3CUART_TX3,
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = IRQ_S3CUART_ERR3,
.end = IRQ_S3CUART_ERR3,
.flags = IORESOURCE_IRQ,
},
};
struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
[0] = {
.resources = s5pc1xx_uart0_resource,
.nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource),
},
[1] = {
.resources = s5pc1xx_uart1_resource,
.nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource),
},
[2] = {
.resources = s5pc1xx_uart2_resource,
.nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource),
},
[3] = {
.resources = s5pc1xx_uart3_resource,
.nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
},
};
/* uart devices */
static struct platform_device s3c24xx_uart_device0 = {
.id = 0,
};
static struct platform_device s3c24xx_uart_device1 = {
.id = 1,
};
static struct platform_device s3c24xx_uart_device2 = {
.id = 2,
};
static struct platform_device s3c24xx_uart_device3 = {
.id = 3,
};
struct platform_device *s3c24xx_uart_src[4] = {
&s3c24xx_uart_device0,
&s3c24xx_uart_device1,
&s3c24xx_uart_device2,
&s3c24xx_uart_device3,
};
struct platform_device *s3c24xx_uart_devs[4] = {
};
......@@ -459,7 +459,7 @@ config SERIAL_SAMSUNG_UARTS
int
depends on ARM && PLAT_S3C
default 2 if ARCH_S3C2400
default 4 if ARCH_S3C64XX || CPU_S3C2443
default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
default 3
help
Select the number of available UART ports for the Samsung S3C
......@@ -533,6 +533,13 @@ config SERIAL_S3C6400
Serial port support for the Samsung S3C6400 and S3C6410
SoCs
config SERIAL_S5PC100
tristate "Samsung S5PC100 Serial port support"
depends on SERIAL_SAMSUNG && CPU_S5PC100
default y
help
Serial port support for the Samsung S5PC100 SoCs
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
......
......@@ -43,6 +43,7 @@ obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
obj-$(CONFIG_SERIAL_MUX) += mux.o
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment