Commit 433abcdf authored by Martyn Welch's avatar Martyn Welch Committed by Benjamin Herrenschmidt

powerpc/86xx: Update GE Fanuc sbc310 DTS

Update GE Fanuc DTS to match the alterations suggested during the merge of
the ppc9a DTS in commit 740d36aeSigned-off-by: default avatarMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 8798b9df
...@@ -83,34 +83,34 @@ localbus@fef05000 { ...@@ -83,34 +83,34 @@ localbus@fef05000 {
/* flash@0,0 is a mirror of part of the memory in flash@1,0 /* flash@0,0 is a mirror of part of the memory in flash@1,0
flash@0,0 { flash@0,0 {
compatible = "cfi-flash"; compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
reg = <0 0 0x01000000>; reg = <0x0 0x0 0x01000000>;
bank-width = <2>; bank-width = <2>;
device-width = <2>; device-width = <2>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
partition@0 { partition@0 {
label = "firmware"; label = "firmware";
reg = <0x00000000 0x01000000>; reg = <0x0 0x01000000>;
read-only; read-only;
}; };
}; };
*/ */
flash@1,0 { flash@1,0 {
compatible = "cfi-flash"; compatible = "gef,sbc310-paged-flash", "cfi-flash";
reg = <1 0 0x8000000>; reg = <0x1 0x0 0x8000000>;
bank-width = <2>; bank-width = <2>;
device-width = <2>; device-width = <2>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
partition@0 { partition@0 {
label = "user"; label = "user";
reg = <0x00000000 0x07800000>; reg = <0x0 0x7800000>;
}; };
partition@7800000 { partition@7800000 {
label = "firmware"; label = "firmware";
reg = <0x07800000 0x00800000>; reg = <0x7800000 0x800000>;
read-only; read-only;
}; };
}; };
...@@ -121,18 +121,16 @@ fpga@4,0 { ...@@ -121,18 +121,16 @@ fpga@4,0 {
}; };
wdt@4,2000 { wdt@4,2000 {
#interrupt-cells = <2>; compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
device_type = "watchdog"; "gef,fpga-wdt";
compatible = "gef,fpga-wdt";
reg = <0x4 0x2000 0x8>; reg = <0x4 0x2000 0x8>;
interrupts = <0x1a 0x4>; interrupts = <0x1a 0x4>;
interrupt-parent = <&gef_pic>; interrupt-parent = <&gef_pic>;
}; };
/* /*
wdt@4,2010 { wdt@4,2010 {
#interrupt-cells = <2>; compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
device_type = "watchdog"; "gef,fpga-wdt";
compatible = "gef,fpga-wdt";
reg = <0x4 0x2010 0x8>; reg = <0x4 0x2010 0x8>;
interrupts = <0x1b 0x4>; interrupts = <0x1b 0x4>;
interrupt-parent = <&gef_pic>; interrupt-parent = <&gef_pic>;
...@@ -141,7 +139,7 @@ wdt@4,2010 { ...@@ -141,7 +139,7 @@ wdt@4,2010 {
gef_pic: pic@4,4000 { gef_pic: pic@4,4000 {
#interrupt-cells = <1>; #interrupt-cells = <1>;
interrupt-controller; interrupt-controller;
compatible = "gef,fpga-pic"; compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
reg = <0x4 0x4000 0x20>; reg = <0x4 0x4000 0x20>;
interrupts = <0x8 interrupts = <0x8
0x9>; 0x9>;
...@@ -161,7 +159,7 @@ soc@fef00000 { ...@@ -161,7 +159,7 @@ soc@fef00000 {
#size-cells = <1>; #size-cells = <1>;
#interrupt-cells = <2>; #interrupt-cells = <2>;
device_type = "soc"; device_type = "soc";
compatible = "simple-bus"; compatible = "fsl,mpc8641-soc", "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>; ranges = <0x0 0xfef00000 0x00100000>;
bus-frequency = <33333333>; bus-frequency = <33333333>;
...@@ -412,5 +410,4 @@ pcie@0 { ...@@ -412,5 +410,4 @@ pcie@0 {
0x0 0x00400000>; 0x0 0x00400000>;
}; };
}; };
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment