Commit 435b4efe authored by Tomoya's avatar Tomoya Committed by David S. Miller

pch_can: Replace netdev_dbg instead of dev_dbg partly

For easy to readable, use netdev_dbg instead of dev_dbg partly
Signed-off-by: default avatarTomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e91530ea
......@@ -222,7 +222,7 @@ static void pch_can_set_run_mode(struct pch_can_priv *priv,
break;
default:
dev_err(&priv->ndev->dev, "%s -> Invalid Mode.\n", __func__);
netdev_err(priv->ndev, "%s -> Invalid Mode.\n", __func__);
break;
}
}
......@@ -275,7 +275,7 @@ static void pch_can_set_int_enables(struct pch_can_priv *priv,
break;
default:
dev_err(&priv->ndev->dev, "Invalid interrupt number.\n");
netdev_err(priv->ndev, "Invalid interrupt number.\n");
break;
}
}
......@@ -528,7 +528,7 @@ static void pch_can_error(struct net_device *ndev, u32 status)
cf->data[1] |= CAN_ERR_CRTL_RX_WARNING;
if ((errc & PCH_TEC) > 96)
cf->data[1] |= CAN_ERR_CRTL_TX_WARNING;
dev_warn(&ndev->dev,
netdev_dbg(ndev,
"%s -> Error Counter is more than 96.\n", __func__);
}
/* Error passive interrupt. */
......@@ -540,7 +540,7 @@ static void pch_can_error(struct net_device *ndev, u32 status)
cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
if ((errc & PCH_TEC) > 127)
cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
dev_err(&ndev->dev,
netdev_dbg(ndev,
"%s -> CAN controller is ERROR PASSIVE .\n", __func__);
}
......@@ -859,10 +859,10 @@ static int pch_can_open(struct net_device *ndev)
retval = pci_enable_msi(priv->dev);
if (retval) {
dev_info(&ndev->dev, "PCH CAN opened without MSI\n");
netdev_err(ndev, "PCH CAN opened without MSI\n");
priv->use_msi = 0;
} else {
dev_info(&ndev->dev, "PCH CAN opened with MSI\n");
netdev_err(ndev, "PCH CAN opened with MSI\n");
priv->use_msi = 1;
}
......@@ -870,14 +870,14 @@ static int pch_can_open(struct net_device *ndev)
retval = request_irq(priv->dev->irq, pch_can_interrupt, IRQF_SHARED,
ndev->name, ndev);
if (retval) {
dev_err(&ndev->dev, "request_irq failed.\n");
netdev_err(ndev, "request_irq failed.\n");
goto req_irq_err;
}
/* Open common can device */
retval = open_candev(ndev);
if (retval) {
dev_err(ndev->dev.parent, "open_candev() failed %d\n", retval);
netdev_err(ndev, "open_candev() failed %d\n", retval);
goto err_open_candev;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment