vhost-vdpa: introduce IOTLB_PERSIST backend feature bit

Userspace needs this feature flag to distinguish if vhost-vdpa iotlb in
the kernel can be trusted to persist IOTLB mapping across vDPA reset.
Without it, userspace has no way to tell apart if it's running on an
older kernel, which could silently drop all iotlb mapping across vDPA
reset, especially with broken parent driver implementation for the
.reset driver op. The broken driver may incorrectly drop all mappings of
its own as part of .reset, which inadvertently ends up with corrupted
mapping state between vhost-vdpa userspace and the kernel. As a
workaround, to make the mapping behaviour predictable across reset,
userspace has to pro-actively remove all mappings before vDPA reset, and
then restore all the mappings afterwards. This workaround is done
unconditionally on top of all parent drivers today, due to the parent
driver implementation issue and no means to differentiate.  This
workaround had been utilized in QEMU since day one when the
corresponding vhost-vdpa userspace backend came to the world.

There are 3 cases that backend may claim this feature bit on for:

- parent device that has to work with platform IOMMU
- parent device with on-chip IOMMU that has the expected
  .reset_map support in driver
- parent device with vendor specific IOMMU implementation with
  persistent IOTLB mapping already that has to specifically
  declare this backend feature

The reason why .reset_map is being one of the pre-condition for
persistent iotlb is because without it, vhost-vdpa can't switch back
iotlb to the initial state later on, especially for the on-chip IOMMU
case which starts with identity mapping at device creation. virtio-vdpa
requires on-chip IOMMU to perform 1:1 passthrough translation from PA to
IOVA as-is to begin with, and .reset_map is the only means to turn back
iotlb to the identity mapping mode after vhost-vdpa is gone.

The difference in behavior did not matter as QEMU unmaps all the memory
unregistering the memory listener at vhost_vdpa_dev_start( started =
false), but the backend acknowledging this feature flag allows QEMU to
make sure it is safe to skip this unmap & map in the case of vhost stop
& start cycle.

In that sense, this feature flag is actually a signal for userspace to
know that the driver bug has been solved. Not offering it indicates that
userspace cannot trust the kernel will retain the maps.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1697880319-4937-4-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>

drivers/vhost/vdpa.c

@@ -439,6 +439,15 @@ static u64 vhost_vdpa_get_backend_features(const struct vhost_vdpa *v)
 		return ops->get_backend_features(vdpa);
 }
 
+static bool vhost_vdpa_has_persistent_map(const struct vhost_vdpa *v)
+{
+	struct vdpa_device *vdpa = v->vdpa;
+	const struct vdpa_config_ops *ops = vdpa->config;
+
+	return (!ops->set_map && !ops->dma_map) || ops->reset_map ||
+	       vhost_vdpa_get_backend_features(v) & BIT_ULL(VHOST_BACKEND_F_IOTLB_PERSIST);
+}
+
 static long vhost_vdpa_set_features(struct vhost_vdpa *v, u64 __user *featurep)
 {
 	struct vdpa_device *vdpa = v->vdpa;
@@ -726,6 +735,7 @@ static long vhost_vdpa_unlocked_ioctl(struct file *filep,
 			return -EFAULT;
 		if (features & ~(VHOST_VDPA_BACKEND_FEATURES |
 				 BIT_ULL(VHOST_BACKEND_F_DESC_ASID) |
+				 BIT_ULL(VHOST_BACKEND_F_IOTLB_PERSIST) |
 				 BIT_ULL(VHOST_BACKEND_F_SUSPEND) |
 				 BIT_ULL(VHOST_BACKEND_F_RESUME) |
 				 BIT_ULL(VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK)))
@@ -742,6 +752,9 @@ static long vhost_vdpa_unlocked_ioctl(struct file *filep,
 		if ((features & BIT_ULL(VHOST_BACKEND_F_DESC_ASID)) &&
 		     !vhost_vdpa_has_desc_group(v))
 			return -EOPNOTSUPP;
+		if ((features & BIT_ULL(VHOST_BACKEND_F_IOTLB_PERSIST)) &&
+		     !vhost_vdpa_has_persistent_map(v))
+			return -EOPNOTSUPP;
 		vhost_set_backend_features(&v->vdev, features);
 		return 0;
 	}
@@ -797,6 +810,8 @@ static long vhost_vdpa_unlocked_ioctl(struct file *filep,
 			features |= BIT_ULL(VHOST_BACKEND_F_RESUME);
 		if (vhost_vdpa_has_desc_group(v))
 			features |= BIT_ULL(VHOST_BACKEND_F_DESC_ASID);
+		if (vhost_vdpa_has_persistent_map(v))
+			features |= BIT_ULL(VHOST_BACKEND_F_IOTLB_PERSIST);
 		features |= vhost_vdpa_get_backend_features(v);
 		if (copy_to_user(featurep, &features, sizeof(features)))
 			r = -EFAULT;

include/uapi/linux/vhost_types.h

@@ -190,5 +190,7 @@ struct vhost_vdpa_iova_range {
  * buffers may reside. Requires VHOST_BACKEND_F_IOTLB_ASID.
  */
 #define VHOST_BACKEND_F_DESC_ASID    0x7
+/* IOTLB don't flush memory mapping across device reset */
+#define VHOST_BACKEND_F_IOTLB_PERSIST  0x8
 
 #endif