Commit 43a90877 authored by Robert Jarzmik's avatar Robert Jarzmik Committed by Arnd Bergmann

mioa701: add newly available DoC G3 chip

As the mioa701 board has a M-Systems DiskOnChip G3 chip, add
it to the platform resources of the board.
Signed-off-by: default avatarRobert Jarzmik <robert.jarzmik@atosorigin.com>
Acked-by: default avatarHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent dc47ce90
......@@ -53,6 +53,7 @@
#include <mach/pxa27x-udc.h>
#include <mach/camera.h>
#include <mach/audio.h>
#include <mach/smemc.h>
#include <media/soc_camera.h>
#include <mach/mioa701.h>
......@@ -390,24 +391,19 @@ static struct pxamci_platform_data mioa701_mci_info = {
};
/* FlashRAM */
static struct resource strataflash_resource = {
static struct resource docg3_resource = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_64M - 1,
.end = PXA_CS0_PHYS + SZ_8K - 1,
.flags = IORESOURCE_MEM,
};
static struct physmap_flash_data strataflash_data = {
.width = 2,
/* .set_vpp = mioa701_set_vpp, */
};
static struct platform_device strataflash = {
.name = "physmap-flash",
static struct platform_device docg3 = {
.name = "docg3",
.id = -1,
.resource = &strataflash_resource,
.resource = &docg3_resource,
.num_resources = 1,
.dev = {
.platform_data = &strataflash_data,
.platform_data = NULL,
},
};
......@@ -685,7 +681,7 @@ static struct platform_device *devices[] __initdata = {
&pxa2xx_pcm,
&mioa701_sound,
&power_dev,
&strataflash,
&docg3,
&gpio_vbus,
&mioa701_camera,
&mioa701_board,
......@@ -720,6 +716,15 @@ static void __init mioa701_machine_init(void)
RTTR = 32768 - 1; /* Reset crazy WinCE value */
UP2OCR = UP2OCR_HXOE;
/*
* Set up the flash memory : DiskOnChip G3 on first static memory bank
*/
__raw_writel(0x7ff02dd8, MSC0);
__raw_writel(0x0001c391, MCMEM0);
__raw_writel(0x0001c391, MCATT0);
__raw_writel(0x0001c391, MCIO0);
pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment