Commit 43bcb402 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branch 'asoc/topic/wm8994' into asoc-next

parents 7254a221 ed6a2772
......@@ -32,6 +32,10 @@ Optional properties:
The second cell is the flags, encoded as the trigger masks from
Documentation/devicetree/bindings/interrupts.txt
- clocks : A list of up to two phandle and clock specifier pairs
- clock-names : A list of clock names sorted in the same order as clocks.
Valid clock names are "MCLK1" and "MCLK2".
- wlf,gpio-cfg : A list of GPIO configuration register values. If absent,
no configuration of these registers is performed. If any value is
over 0xffff then the register will be left as default. If present 11
......
......@@ -819,8 +819,9 @@ static int clk_sys_event(struct snd_soc_dapm_widget *w,
* don't want false reports.
*/
if (wm8994->jackdet && !wm8994->clk_has_run) {
schedule_delayed_work(&wm8994->jackdet_bootstrap,
msecs_to_jiffies(1000));
queue_delayed_work(system_power_efficient_wq,
&wm8994->jackdet_bootstrap,
msecs_to_jiffies(1000));
wm8994->clk_has_run = true;
}
break;
......@@ -1432,7 +1433,7 @@ SOC_DAPM_SINGLE("AIF1.1 Switch", WM8994_DAC2_RIGHT_MIXER_ROUTING,
#define WM8994_CLASS_W_SWITCH(xname, reg, shift, max, invert) \
SOC_SINGLE_EXT(xname, reg, shift, max, invert, \
snd_soc_get_volsw, wm8994_put_class_w)
snd_soc_dapm_get_volsw, wm8994_put_class_w)
static int wm8994_put_class_w(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
......@@ -3485,7 +3486,8 @@ static irqreturn_t wm8994_mic_irq(int irq, void *data)
pm_wakeup_event(codec->dev, 300);
schedule_delayed_work(&priv->mic_work, msecs_to_jiffies(250));
queue_delayed_work(system_power_efficient_wq,
&priv->mic_work, msecs_to_jiffies(250));
return IRQ_HANDLED;
}
......@@ -3573,8 +3575,9 @@ static void wm8958_mic_id(void *data, u16 status)
/* If nothing present then clear our statuses */
dev_dbg(codec->dev, "Detected open circuit\n");
schedule_delayed_work(&wm8994->open_circuit_work,
msecs_to_jiffies(2500));
queue_delayed_work(system_power_efficient_wq,
&wm8994->open_circuit_work,
msecs_to_jiffies(2500));
return;
}
......@@ -3688,8 +3691,9 @@ static irqreturn_t wm1811_jackdet_irq(int irq, void *data)
WM1811_JACKDET_DB, 0);
delay = control->pdata.micdet_delay;
schedule_delayed_work(&wm8994->mic_work,
msecs_to_jiffies(delay));
queue_delayed_work(system_power_efficient_wq,
&wm8994->mic_work,
msecs_to_jiffies(delay));
} else {
dev_dbg(codec->dev, "Jack not detected\n");
......@@ -3934,8 +3938,9 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data)
id_delay = wm8994->wm8994->pdata.mic_id_delay;
if (wm8994->mic_detecting)
schedule_delayed_work(&wm8994->mic_complete_work,
msecs_to_jiffies(id_delay));
queue_delayed_work(system_power_efficient_wq,
&wm8994->mic_complete_work,
msecs_to_jiffies(id_delay));
else
wm8958_button_det(codec, reg);
......@@ -4008,9 +4013,6 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
wm8994->micdet_irq = control->pdata.micdet_irq;
pm_runtime_enable(codec->dev);
pm_runtime_idle(codec->dev);
/* By default use idle_bias_off, will override for WM8994 */
codec->dapm.idle_bias_off = 1;
......@@ -4383,8 +4385,6 @@ static int wm8994_codec_remove(struct snd_soc_codec *codec)
wm8994_set_bias_level(codec, SND_SOC_BIAS_OFF);
pm_runtime_disable(codec->dev);
for (i = 0; i < ARRAY_SIZE(wm8994->fll_locked); i++)
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_FLL1_LOCK + i,
&wm8994->fll_locked[i]);
......@@ -4443,6 +4443,9 @@ static int wm8994_probe(struct platform_device *pdev)
wm8994->wm8994 = dev_get_drvdata(pdev->dev.parent);
pm_runtime_enable(&pdev->dev);
pm_runtime_idle(&pdev->dev);
return snd_soc_register_codec(&pdev->dev, &soc_codec_dev_wm8994,
wm8994_dai, ARRAY_SIZE(wm8994_dai));
}
......@@ -4450,6 +4453,8 @@ static int wm8994_probe(struct platform_device *pdev)
static int wm8994_remove(struct platform_device *pdev)
{
snd_soc_unregister_codec(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment