Commit 442b626e authored by Ben Skeggs's avatar Ben Skeggs

drm/nv04-nv40: import initial pm backend

Currently just hooked up to the already-existing nouveau_hw, which should
handle all relevant chipsets as well as we currently can.

This will likely be eventually split out and improved into chipset specific
code at a later point.
Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
parent 02c30ca0
......@@ -25,7 +25,7 @@ nouveau-y := nouveau_drv.o nouveau_state.o nouveau_channel.o nouveau_mem.o \
nv04_crtc.o nv04_display.o nv04_cursor.o nv04_fbcon.o \
nv10_gpio.o nv50_gpio.o \
nv50_calc.o \
nv50_pm.o
nv04_pm.o nv50_pm.o
nouveau-$(CONFIG_DRM_NOUVEAU_DEBUG) += nouveau_debugfs.o
nouveau-$(CONFIG_COMPAT) += nouveau_ioc32.o
......
......@@ -431,7 +431,8 @@ nouveau_hw_get_pllvals(struct drm_device *dev, enum pll_types plltype,
struct pll_lims pll_lim;
int ret;
BUG_ON(reg1 == 0);
if (reg1 == 0)
return -ENOENT;
pll1 = nvReadMC(dev, reg1);
......@@ -480,6 +481,7 @@ int
nouveau_hw_get_clock(struct drm_device *dev, enum pll_types plltype)
{
struct nouveau_pll_vals pllvals;
int ret;
if (plltype == PLL_MEMORY &&
(dev->pci_device & 0x0ff0) == CHIPSET_NFORCE) {
......@@ -499,7 +501,9 @@ nouveau_hw_get_clock(struct drm_device *dev, enum pll_types plltype)
return clock;
}
nouveau_hw_get_pllvals(dev, plltype, &pllvals);
ret = nouveau_hw_get_pllvals(dev, plltype, &pllvals);
if (ret)
return ret;
return nouveau_hw_pllvals_to_clk(&pllvals);
}
......
......@@ -41,6 +41,11 @@ int nouveau_voltage_gpio_set(struct drm_device *, int voltage);
void nouveau_perf_init(struct drm_device *);
void nouveau_perf_fini(struct drm_device *);
/* nv04_pm.c */
int nv04_pm_clock_get(struct drm_device *, u32 id);
void *nv04_pm_clock_pre(struct drm_device *, u32 id, int khz);
void nv04_pm_clock_set(struct drm_device *, void *);
/* nv50_pm.c */
int nv50_pm_clock_get(struct drm_device *, u32 id);
void *nv50_pm_clock_pre(struct drm_device *, u32 id, int khz);
......
......@@ -96,6 +96,9 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
engine->gpio.get = NULL;
engine->gpio.set = NULL;
engine->gpio.irq_enable = NULL;
engine->pm.clock_get = nv04_pm_clock_get;
engine->pm.clock_pre = nv04_pm_clock_pre;
engine->pm.clock_set = nv04_pm_clock_set;
break;
case 0x10:
engine->instmem.init = nv04_instmem_init;
......@@ -147,6 +150,9 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
engine->gpio.get = nv10_gpio_get;
engine->gpio.set = nv10_gpio_set;
engine->gpio.irq_enable = NULL;
engine->pm.clock_get = nv04_pm_clock_get;
engine->pm.clock_pre = nv04_pm_clock_pre;
engine->pm.clock_set = nv04_pm_clock_set;
break;
case 0x20:
engine->instmem.init = nv04_instmem_init;
......@@ -198,6 +204,9 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
engine->gpio.get = nv10_gpio_get;
engine->gpio.set = nv10_gpio_set;
engine->gpio.irq_enable = NULL;
engine->pm.clock_get = nv04_pm_clock_get;
engine->pm.clock_pre = nv04_pm_clock_pre;
engine->pm.clock_set = nv04_pm_clock_set;
break;
case 0x30:
engine->instmem.init = nv04_instmem_init;
......@@ -249,6 +258,11 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
engine->gpio.get = nv10_gpio_get;
engine->gpio.set = nv10_gpio_set;
engine->gpio.irq_enable = NULL;
engine->pm.clock_get = nv04_pm_clock_get;
engine->pm.clock_pre = nv04_pm_clock_pre;
engine->pm.clock_set = nv04_pm_clock_set;
engine->pm.voltage_get = nouveau_voltage_gpio_get;
engine->pm.voltage_set = nouveau_voltage_gpio_set;
break;
case 0x40:
case 0x60:
......@@ -301,6 +315,11 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
engine->gpio.get = nv10_gpio_get;
engine->gpio.set = nv10_gpio_set;
engine->gpio.irq_enable = NULL;
engine->pm.clock_get = nv04_pm_clock_get;
engine->pm.clock_pre = nv04_pm_clock_pre;
engine->pm.clock_set = nv04_pm_clock_set;
engine->pm.voltage_get = nouveau_voltage_gpio_get;
engine->pm.voltage_set = nouveau_voltage_gpio_set;
break;
case 0x50:
case 0x80: /* gotta love NVIDIA's consistency.. */
......
/*
* Copyright 2010 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Ben Skeggs
*/
#include "drmP.h"
#include "nouveau_drv.h"
#include "nouveau_hw.h"
struct nv04_pm_state {
struct pll_lims pll;
struct nouveau_pll_vals calc;
};
int
nv04_pm_clock_get(struct drm_device *dev, u32 id)
{
return nouveau_hw_get_clock(dev, id);
}
void *
nv04_pm_clock_pre(struct drm_device *dev, u32 id, int khz)
{
struct nv04_pm_state *state;
int ret;
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (!state)
return ERR_PTR(-ENOMEM);
ret = get_pll_limits(dev, id, &state->pll);
if (ret) {
kfree(state);
return ERR_PTR(ret);
}
ret = nouveau_calc_pll_mnp(dev, &state->pll, khz, &state->calc);
if (!ret) {
kfree(state);
return ERR_PTR(-EINVAL);
}
return state;
}
void
nv04_pm_clock_set(struct drm_device *dev, void *pre_state)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nv04_pm_state *state = pre_state;
u32 reg = state->pll.reg;
/* thank the insane nouveau_hw_setpll() interface for this */
if (dev_priv->card_type >= NV_40)
reg += 4;
nouveau_hw_setpll(dev, reg, &state->calc);
kfree(state);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment