cxl: New hcalls to support cxl adapters

The hypervisor calls provide an interface with a coherent platform
facility and function. It matches version 0.16 of the 'PAPR changes'
document.

The following hcalls are supported:
H_ATTACH_CA_PROCESS    Attach a process element to a coherent platform
                       function.
H_DETACH_CA_PROCESS    Detach a process element from a coherent
                       platform function.
H_CONTROL_CA_FUNCTION  Allow the partition to manipulate or query
                       certain coherent platform function behaviors.
H_COLLECT_CA_INT_INFO  Collect interrupt info about a coherent.
                       platform function after an interrupt occurred
H_CONTROL_CA_FAULTS    Control the operation of a coherent platform
                       function after a fault occurs.
H_DOWNLOAD_CA_FACILITY Support for downloading a base adapter image to
                       the coherent platform facility, and for
                       validating the entire image after the download.
H_CONTROL_CA_FACILITY  Allow the partition to manipulate or query
                       certain coherent platform facility behaviors.
Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

drivers/misc/cxl/cxl.h

@@ -688,6 +688,7 @@ void cxl_prefault(struct cxl_context *ctx, u64 wed);
 
 struct cxl *get_cxl_adapter(int num);
 int cxl_alloc_sst(struct cxl_context *ctx);
+void cxl_dump_debug_buffer(void *addr, size_t size);
 
 void init_cxl_native(void);
 
@@ -701,16 +702,34 @@ unsigned int cxl_map_irq(struct cxl *adapter, irq_hw_number_t hwirq,
 void cxl_unmap_irq(unsigned int virq, void *cookie);
 int __detach_context(struct cxl_context *ctx);
 
-/* This matches the layout of the H_COLLECT_CA_INT_INFO retbuf */
+/*
+ * This must match the layout of the H_COLLECT_CA_INT_INFO retbuf defined
+ * in PAPR.
+ * A word about endianness: a pointer to this structure is passed when
+ * calling the hcall. However, it is not a block of memory filled up by
+ * the hypervisor. The return values are found in registers, and copied
+ * one by one when returning from the hcall. See the end of the call to
+ * plpar_hcall9() in hvCall.S
+ * As a consequence:
+ * - we don't need to do any endianness conversion
+ * - the pid and tid are an exception. They are 32-bit values returned in
+ *   the same 64-bit register. So we do need to worry about byte ordering.
+ */
 struct cxl_irq_info {
 	u64 dsisr;
 	u64 dar;
 	u64 dsr;
+#ifndef CONFIG_CPU_LITTLE_ENDIAN
 	u32 pid;
 	u32 tid;
+#else
+	u32 tid;
+	u32 pid;
+#endif
 	u64 afu_err;
 	u64 errstat;
-	u64 padding[3]; /* to match the expected retbuf size for plpar_hcall9 */
+	u64 proc_handle;
+	u64 padding[2]; /* to match the expected retbuf size for plpar_hcall9 */
 };
 
 void cxl_assign_psn_space(struct cxl_context *ctx);

drivers/misc/cxl/hcalls.h

+/*
+ * Copyright 2015 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _HCALLS_H
+#define _HCALLS_H
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include "cxl.h"
+
+#define SG_BUFFER_SIZE 4096
+#define SG_MAX_ENTRIES 256
+
+struct sg_list {
+	u64 phys_addr;
+	u64 len;
+};
+
+/*
+ * This is straight out of PAPR, but replacing some of the compound fields with
+ * a single field, where they were identical to the register layout.
+ *
+ * The 'flags' parameter regroups the various bit-fields
+ */
+#define CXL_PE_CSRP_VALID			(1ULL << 63)
+#define CXL_PE_PROBLEM_STATE			(1ULL << 62)
+#define CXL_PE_SECONDARY_SEGMENT_TBL_SRCH	(1ULL << 61)
+#define CXL_PE_TAGS_ACTIVE			(1ULL << 60)
+#define CXL_PE_USER_STATE			(1ULL << 59)
+#define CXL_PE_TRANSLATION_ENABLED		(1ULL << 58)
+#define CXL_PE_64_BIT				(1ULL << 57)
+#define CXL_PE_PRIVILEGED_PROCESS		(1ULL << 56)
+
+#define CXL_PROCESS_ELEMENT_VERSION 1
+struct cxl_process_element_hcall {
+	__be64 version;
+	__be64 flags;
+	u8     reserved0[12];
+	__be32 pslVirtualIsn;
+	u8     applicationVirtualIsnBitmap[256];
+	u8     reserved1[144];
+	struct cxl_process_element_common common;
+	u8     reserved4[12];
+} __packed;
+
+#define H_STATE_NORMAL              1
+#define H_STATE_DISABLE             2
+#define H_STATE_TEMP_UNAVAILABLE    3
+#define H_STATE_PERM_UNAVAILABLE    4
+
+/* NOTE: element must be a logical real address, and must be pinned */
+long cxl_h_attach_process(u64 unit_address, struct cxl_process_element_hcall *element,
+			u64 *process_token, u64 *mmio_addr, u64 *mmio_size);
+
+/**
+ * cxl_h_detach_process - Detach a process element from a coherent
+ *                        platform function.
+ */
+long cxl_h_detach_process(u64 unit_address, u64 process_token);
+
+/**
+ * cxl_h_reset_afu - Perform a reset to the coherent platform function.
+ */
+long cxl_h_reset_afu(u64 unit_address);
+
+/**
+ * cxl_h_suspend_process - Suspend a process from being executed
+ * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
+ *              process was attached.
+ */
+long cxl_h_suspend_process(u64 unit_address, u64 process_token);
+
+/**
+ * cxl_h_resume_process - Resume a process to be executed
+ * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
+ *              process was attached.
+ */
+long cxl_h_resume_process(u64 unit_address, u64 process_token);
+
+/**
+ * cxl_h_read_error_state - Reads the error state of the coherent
+ *                          platform function.
+ * R4 contains the error state
+ */
+long cxl_h_read_error_state(u64 unit_address, u64 *state);
+
+/**
+ * cxl_h_get_afu_err - collect the AFU error buffer
+ * Parameter1 = byte offset into error buffer to retrieve, valid values
+ *              are between 0 and (ibm,error-buffer-size - 1)
+ * Parameter2 = 4K aligned real address of error buffer, to be filled in
+ * Parameter3 = length of error buffer, valid values are 4K or less
+ */
+long cxl_h_get_afu_err(u64 unit_address, u64 offset, u64 buf_address, u64 len);
+
+/**
+ * cxl_h_get_config - collect configuration record for the
+ *                    coherent platform function
+ * Parameter1 = # of configuration record to retrieve, valid values are
+ *              between 0 and (ibm,#config-records - 1)
+ * Parameter2 = byte offset into configuration record to retrieve,
+ *              valid values are between 0 and (ibm,config-record-size - 1)
+ * Parameter3 = 4K aligned real address of configuration record buffer,
+ *              to be filled in
+ * Parameter4 = length of configuration buffer, valid values are 4K or less
+ */
+long cxl_h_get_config(u64 unit_address, u64 cr_num, u64 offset,
+		u64 buf_address, u64 len);
+
+/**
+ * cxl_h_terminate_process - Terminate the process before completion
+ * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
+ *              process was attached.
+ */
+long cxl_h_terminate_process(u64 unit_address, u64 process_token);
+
+/**
+ * cxl_h_collect_vpd - Collect VPD for the coherent platform function.
+ * Parameter1 = # of VPD record to retrieve, valid values are between 0
+ *              and (ibm,#config-records - 1).
+ * Parameter2 = 4K naturally aligned real buffer containing block
+ *              list entries
+ * Parameter3 = number of block list entries in the block list, valid
+ *              values are between 0 and 256
+ */
+long cxl_h_collect_vpd(u64 unit_address, u64 record, u64 list_address,
+		       u64 num, u64 *out);
+
+/**
+ * cxl_h_get_fn_error_interrupt - Read the function-wide error data based on an interrupt
+ */
+long cxl_h_get_fn_error_interrupt(u64 unit_address, u64 *reg);
+
+/**
+ * cxl_h_ack_fn_error_interrupt - Acknowledge function-wide error data
+ *                                based on an interrupt
+ * Parameter1 = value to write to the function-wide error interrupt register
+ */
+long cxl_h_ack_fn_error_interrupt(u64 unit_address, u64 value);
+
+/**
+ * cxl_h_get_error_log - Retrieve the Platform Log ID (PLID) of
+ *                       an error log
+ */
+long cxl_h_get_error_log(u64 unit_address, u64 value);
+
+/**
+ * cxl_h_collect_int_info - Collect interrupt info about a coherent
+ *                          platform function after an interrupt occurred.
+ */
+long cxl_h_collect_int_info(u64 unit_address, u64 process_token,
+			struct cxl_irq_info *info);
+
+/**
+ * cxl_h_control_faults - Control the operation of a coherent platform
+ *                        function after a fault occurs.
+ *
+ * Parameters
+ *    control-mask: value to control the faults
+ *                  looks like PSL_TFC_An shifted >> 32
+ *    reset-mask: mask to control reset of function faults
+ *                Set reset_mask = 1 to reset PSL errors
+ */
+long cxl_h_control_faults(u64 unit_address, u64 process_token,
+			u64 control_mask, u64 reset_mask);
+
+/**
+ * cxl_h_reset_adapter - Perform a reset to the coherent platform facility.
+ */
+long cxl_h_reset_adapter(u64 unit_address);
+
+/**
+ * cxl_h_collect_vpd - Collect VPD for the coherent platform function.
+ * Parameter1 = 4K naturally aligned real buffer containing block
+ *              list entries
+ * Parameter2 = number of block list entries in the block list, valid
+ *              values are between 0 and 256
+ */
+long cxl_h_collect_vpd_adapter(u64 unit_address, u64 list_address,
+			       u64 num, u64 *out);
+
+/**
+ * cxl_h_download_adapter_image - Download the base image to the coherent
+ *                                platform facility.
+ */
+long cxl_h_download_adapter_image(u64 unit_address,
+				  u64 list_address, u64 num,
+				  u64 *out);
+
+/**
+ * cxl_h_validate_adapter_image - Validate the base image in the coherent
+ *                                platform facility.
+ */
+long cxl_h_validate_adapter_image(u64 unit_address,
+				  u64 list_address, u64 num,
+				  u64 *out);
+#endif /* _HCALLS_H */

drivers/misc/cxl/main.c

@@ -162,6 +162,32 @@ int cxl_alloc_sst(struct cxl_context *ctx)
 	return 0;
 }
 
+/* print buffer content as integers when debugging */
+void cxl_dump_debug_buffer(void *buf, size_t buf_len)
+{
+#ifdef DEBUG
+	int i, *ptr;
+
+	/*
+	 * We want to regroup up to 4 integers per line, which means they
+	 * need to be in the same pr_devel() statement
+	 */
+	ptr = (int *) buf;
+	for (i = 0; i * 4 < buf_len; i += 4) {
+		if ((i + 3) * 4 < buf_len)
+			pr_devel("%.8x %.8x %.8x %.8x\n", ptr[i], ptr[i + 1],
+				ptr[i + 2], ptr[i + 3]);
+		else if ((i + 2) * 4 < buf_len)
+			pr_devel("%.8x %.8x %.8x\n", ptr[i], ptr[i + 1],
+				ptr[i + 2]);
+		else if ((i + 1) * 4 < buf_len)
+			pr_devel("%.8x %.8x\n", ptr[i], ptr[i + 1]);
+		else
+			pr_devel("%.8x\n", ptr[i]);
+	}
+#endif /* DEBUG */
+}
+
 /* Find a CXL adapter by it's number and increase it's refcount */
 struct cxl *get_cxl_adapter(int num)
 {

drivers/misc/cxl/native.c

@@ -726,6 +726,7 @@ static int native_get_irq_info(struct cxl_afu *afu, struct cxl_irq_info *info)
 	info->tid = pidtid & 0xffffffff;
 	info->afu_err = cxl_p2n_read(afu, CXL_AFU_ERR_An);
 	info->errstat = cxl_p2n_read(afu, CXL_PSL_ErrStat_An);
+	info->proc_handle = 0;
 
 	return 0;
 }