Commit 444d18a7 authored by Andrey Smirnov's avatar Andrey Smirnov Committed by Shawn Guo

ARM: dts: vf610-zii-scu4-aib: Use generic names for DT nodes

The devicetree specification recommends using generic node names.

Some ZII dts files already follow such recommendation, but some don't,
so use generic node names for consistency among the ZII dts files.
Signed-off-by: default avatarAndrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent e5380cd8
...@@ -407,7 +407,7 @@ &dspi1 { ...@@ -407,7 +407,7 @@ &dspi1 {
pinctrl-0 = <&pinctrl_dspi1>; pinctrl-0 = <&pinctrl_dspi1>;
status = "okay"; status = "okay";
spi-flash@0 { flash@0 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
compatible = "jedec,spi-nor"; compatible = "jedec,spi-nor";
...@@ -420,7 +420,7 @@ partition@0 { ...@@ -420,7 +420,7 @@ partition@0 {
}; };
}; };
spi-flash@1 { flash@1 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
compatible = "jedec,spi-nor"; compatible = "jedec,spi-nor";
...@@ -509,7 +509,7 @@ gpio6: io-expander@22 { ...@@ -509,7 +509,7 @@ gpio6: io-expander@22 {
#gpio-cells = <2>; #gpio-cells = <2>;
}; };
lm75@48 { temp-sensor@48 {
compatible = "national,lm75"; compatible = "national,lm75";
reg = <0x48>; reg = <0x48>;
}; };
...@@ -524,7 +524,7 @@ eeprom@52 { ...@@ -524,7 +524,7 @@ eeprom@52 {
reg = <0x52>; reg = <0x52>;
}; };
ds1682@6b { elapsed-time-recorder@6b {
compatible = "dallas,ds1682"; compatible = "dallas,ds1682";
reg = <0x6b>; reg = <0x6b>;
}; };
...@@ -536,7 +536,7 @@ &i2c1 { ...@@ -536,7 +536,7 @@ &i2c1 {
pinctrl-0 = <&pinctrl_i2c1>; pinctrl-0 = <&pinctrl_i2c1>;
status = "okay"; status = "okay";
adt7411@4a { adc@4a {
compatible = "adi,adt7411"; compatible = "adi,adt7411";
reg = <0x4a>; reg = <0x4a>;
}; };
...@@ -548,7 +548,7 @@ &i2c2 { ...@@ -548,7 +548,7 @@ &i2c2 {
pinctrl-0 = <&pinctrl_i2c2>; pinctrl-0 = <&pinctrl_i2c2>;
status = "okay"; status = "okay";
gpio9: sx1503q@20 { gpio9: io-expander@20 {
compatible = "semtech,sx1503q"; compatible = "semtech,sx1503q";
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sx1503_20>; pinctrl-0 = <&pinctrl_sx1503_20>;
...@@ -559,12 +559,12 @@ gpio9: sx1503q@20 { ...@@ -559,12 +559,12 @@ gpio9: sx1503q@20 {
interrupts = <31 IRQ_TYPE_EDGE_FALLING>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
}; };
lm75@4e { temp-sensor@4e {
compatible = "national,lm75"; compatible = "national,lm75";
reg = <0x4e>; reg = <0x4e>;
}; };
lm75@4f { temp-sensor@4f {
compatible = "national,lm75"; compatible = "national,lm75";
reg = <0x4f>; reg = <0x4f>;
}; };
...@@ -576,17 +576,17 @@ gpio7: io-expander@23 { ...@@ -576,17 +576,17 @@ gpio7: io-expander@23 {
reg = <0x23>; reg = <0x23>;
}; };
adt7411@4a { adc@4a {
compatible = "adi,adt7411"; compatible = "adi,adt7411";
reg = <0x4a>; reg = <0x4a>;
}; };
at24c08@54 { eeprom@54 {
compatible = "atmel,24c08"; compatible = "atmel,24c08";
reg = <0x54>; reg = <0x54>;
}; };
tca9548@70 { i2c-mux@70 {
compatible = "nxp,pca9548"; compatible = "nxp,pca9548";
pinctrl-names = "default"; pinctrl-names = "default";
#address-cells = <1>; #address-cells = <1>;
...@@ -625,7 +625,7 @@ sff4_i2c: i2c@5 { ...@@ -625,7 +625,7 @@ sff4_i2c: i2c@5 {
}; };
}; };
tca9548@71 { i2c-mux@71 {
compatible = "nxp,pca9548"; compatible = "nxp,pca9548";
pinctrl-names = "default"; pinctrl-names = "default";
reg = <0x71>; reg = <0x71>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment