Merge bk://linux-input.bkbits.net/linux-input

into home.transmeta.com:/home/torvalds/v2.5/linux

Documentation/input/ff.txt

 Force feedback for Linux.
 By Johann Deneux <deneux@ifrance.com> on 2001/04/22.
-You can redistribute this file, provided you include shape.fig and
-interactive.fig.
+You may redistribute this file. Please remember to include shape.fig and
+interactive.fig as well.
 ----------------------------------------------------------------------------
 
 0. Introduction
@@ -90,12 +90,14 @@ following bits:
 - FF_Y		has an Y axis (usually joysticks)
 - FF_WHEEL	has a wheel (usually sterring wheels)
 - FF_CONSTANT	can render constant force effects
-- FF_PERIODIC	can render periodic effects (sine, ramp, square...)
+- FF_PERIODIC	can render periodic effects (sine, triangle, square...)
+- FF_RAMP       can render ramp effects
 - FF_SPRING	can simulate the presence of a spring
 - FF_FRICTION	can simulate friction 
 - FF_DAMPER	can simulate damper effects
 - FF_RUMBLE	rumble effects (normally the only effect supported by rumble
 		pads)
+- FF_INERTIA    can simulate inertia
 
 
 int ioctl(int fd, EVIOCGEFFECTS, int *n);

drivers/char/Makefile

@@ -13,7 +13,7 @@ obj-y	 += mem.o tty_io.o n_tty.o tty_ioctl.o pty.o misc.o random.o
 # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
 
 export-objs     :=	busmouse.o console.o generic_serial.o ip2main.o \
-			ite_gpio.o misc.o nvram.o random.o rtc.o \
+			ite_gpio.o keyboard.o misc.o nvram.o random.o rtc.o \
 			selection.o sonypi.o sysrq.o tty_io.o tty_ioctl.o
 
 obj-$(CONFIG_VT) += vt.o vc_screen.o consolemap.o consolemap_deftbl.o selection.o keyboard.o

drivers/char/keyboard.c

@@ -66,6 +66,7 @@ extern void ctrl_alt_del(void);
 #endif
 
 struct pt_regs *kbd_pt_regs;
+EXPORT_SYMBOL(kbd_pt_regs);
 void compute_shiftstate(void);
 
 /*

drivers/char/tty_io.c

@@ -204,6 +204,8 @@ char *tty_name(struct tty_struct *tty, char *buf)
 	return _tty_make_name(tty, (tty)?tty->driver.name:NULL, buf);
 }
 
+EXPORT_SYMBOL(tty_name);
+
 inline int tty_paranoia_check(struct tty_struct *tty, kdev_t device,
 			      const char *routine)
 {

drivers/input/input.c

@@ -605,7 +605,7 @@ static int input_devices_read(char *buf, char **start, off_t pos, int count, int
 
 		len += sprintf(buf + len, "N: Name=\"%s\"\n", dev->name ? dev->name : "");
 		len += sprintf(buf + len, "P: Phys=%s\n", dev->phys ? dev->phys : "");
-		len += sprintf(buf + len, "D: Drivers=");
+		len += sprintf(buf + len, "H: Handlers=");
 
 		list_for_each(hnode,&dev->h_list) {
 			struct input_handle * handle = to_handle(hnode);

drivers/input/misc/pcspkr.c

@@ -22,8 +22,8 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("PC Speaker beeper driver");
 MODULE_LICENSE("GPL");
 
-static char *pcspkr_name = "PC Speaker";
-static char *pcspkr_phys = "isa0061/input0";
+static char pcspkr_name[] = "PC Speaker";
+static char pcspkr_phys[] = "isa0061/input0";
 static struct input_dev pcspkr_dev;
 
 spinlock_t i8253_beep_lock = SPIN_LOCK_UNLOCKED;

drivers/input/serio/i8042-io.h

@@ -62,7 +62,7 @@ static inline int i8042_platform_init(void)
  * On ix86 platforms touching the i8042 data register region can do really
  * bad things. Because of this the region is always reserved on ix86 boxes.
  */
-#if !defined(__i386__) && !defined(__sh__) && !defined(__alpha__)
+#if !defined(__i386__) && !defined(__sh__) && !defined(__alpha__) && !defined(__x86_64__)
 	if (!request_region(I8042_DATA_REG, 16, "i8042"))
 		return 0;
 #endif
@@ -71,7 +71,7 @@ static inline int i8042_platform_init(void)
 
 static inline void i8042_platform_exit(void)
 {
-#if !defined(__i386__) && !defined(__sh__) && !defined(__alpha__)
+#if !defined(__i386__) && !defined(__sh__) && !defined(__alpha__) && !defined(__x86_64__)
 	release_region(I8042_DATA_REG, 16);
 #endif
 }

drivers/input/serio/q40kbd.c

@@ -47,12 +47,24 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Q40 PS/2 keyboard controller driver");
 MODULE_LICENSE("GPL");
 
+
+static int q40kbd_open(struct serio *port)
+{
+	return 0;
+}
+static void q40kbd_close(struct serio *port)
+{
+	return 0;
+}
+
 static struct serio q40kbd_port =
 {
 	.type	= SERIO_8042,
+	.name	= "Q40 kbd port",
+	.phys	= "Q40",
 	.write	= NULL,
-	.name	= "Q40 PS/2 kbd port",
-	.phys	= "isa0060/serio0",
+	.open	= q40kbd_open,
+	.close	= q40kbd_close,
 };
 
 static void q40kbd_interrupt(int irq, void *dev_id, struct pt_regs *regs)
@@ -70,13 +82,10 @@ void __init q40kbd_init(void)
 {
 	int maxread = 100;
 
-	/* Get the keyboard controller registers (incomplete decode) */
-	request_region(0x60, 16, "q40kbd");
-
 	/* allocate the IRQ */
 	request_irq(Q40_IRQ_KEYBOARD, q40kbd_interrupt, 0, "q40kbd", NULL);
 
-	/* flush any pending input. */
+	/* flush any pending input */
 	while (maxread-- && (IRQ_KEYB_MASK & master_inb(INTERRUPT_REG)))
 		master_inb(KEYCODE_REG);
 	
@@ -84,15 +93,17 @@ void __init q40kbd_init(void)
 	master_outb(-1,KEYBOARD_UNLOCK_REG);
 	master_outb(1,KEY_IRQ_ENABLE_REG);
 
-	register_serio_port(&q40kbd_port);
-	printk(KERN_INFO "serio: Q40 PS/2 kbd port irq %d\n", Q40_IRQ_KEYBOARD);
+	serio_register_port(&q40kbd_port);
+	printk(KERN_INFO "serio: Q40 kbd registered\n");
 }
 
 void __exit q40kbd_exit(void)
 {
-	unregister_serio_port(&q40kbd_port);
+	master_outb(0,KEY_IRQ_ENABLE_REG);
+	master_outb(-1,KEYBOARD_UNLOCK_REG);
+
+	serio_unregister_port(&q40kbd_port);
 	free_irq(Q40_IRQ_KEYBOARD, NULL);
-	release_region(0x60, 16);	
 }
 
 module_init(q40kbd_init);

drivers/input/serio/serport.c

 /*
- * $Id: serport_old.c,v 1.10 2002/01/24 19:52:57 vojtech Exp $
+ * Input device TTY line discipline
+ *
+ * Copyright (c) 1999-2002 Vojtech Pavlik
  *
- *  Copyright (c) 1999-2001 Vojtech Pavlik
- */
-
-/*
  * This is a module that converts a tty line into a much simpler
  * 'serial io port' abstraction that the input device drivers use.
  */
 
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or 
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- * 
- *  Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
- * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
  */
 
 #include <asm/uaccess.h>
@@ -41,10 +25,13 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Input device TTY line discipline");
 MODULE_LICENSE("GPL");
 
+#define SERPORT_BUSY	1
+
 struct serport {
 	struct tty_struct *tty;
 	wait_queue_head_t wait;
 	struct serio serio;
+	unsigned long flags;
 	char phys[32];
 };
 
@@ -68,20 +55,20 @@ static int serport_serio_open(struct serio *serio)
 static void serport_serio_close(struct serio *serio)
 {
 	struct serport *serport = serio->driver;
+
+	serport->serio.type = 0;
 	wake_up_interruptible(&serport->wait);
 }
 
 /*
  * serport_ldisc_open() is the routine that is called upon setting our line
- * discipline on a tty. It looks for the Mag, and if found, registers
- * it as a joystick device.
+ * discipline on a tty. It prepares the serio struct.
  */
 
 static int serport_ldisc_open(struct tty_struct *tty)
 {
 	struct serport *serport;
-	char ttyname[64];
-	int i;
+	char name[64];
 
 	MOD_INC_USE_COUNT;
 
@@ -96,11 +83,7 @@ static int serport_ldisc_open(struct tty_struct *tty)
 	serport->tty = tty;
 	tty->disc_data = serport;
 
-	strcpy(ttyname, tty->driver.name);
-	for (i = 0; ttyname[i] != 0 && ttyname[i] != '/'; i++);
-	ttyname[i] = 0;
-
-	sprintf(serport->phys, "%s%d/serio0", ttyname, minor(tty->device) - tty->driver.minor_start);
+	snprintf(serport->phys, sizeof(serport->phys), "%s/serio0", tty_name(tty, name));
 
 	serport->serio.name = serport_name;
 	serport->serio.phys = serport->phys;
@@ -161,29 +144,18 @@ static int serport_ldisc_room(struct tty_struct *tty)
 static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, unsigned char * buf, size_t nr)
 {
 	struct serport *serport = (struct serport*) tty->disc_data;
-	DECLARE_WAITQUEUE(wait, current);
-	char name[32];
+	char name[64];
 
-#ifdef CONFIG_DEVFS_FS
-	sprintf(name, tty->driver.name, minor(tty->device) - tty->driver.minor_start);
-#else
-	sprintf(name, "%s%d", tty->driver.name, minor(tty->device) - tty->driver.minor_start);
-#endif
+	if (test_and_set_bit(SERPORT_BUSY, &serport->flags))
+		return -EBUSY;
 
 	serio_register_port(&serport->serio);
-
-	printk(KERN_INFO "serio: Serial port %s\n", name);
-
-	add_wait_queue(&serport->wait, &wait);
-	set_current_state(TASK_INTERRUPTIBLE);
-
-	while(serport->serio.type && !signal_pending(current)) schedule();
-
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&serport->wait, &wait);
-
+	printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty, name));
+	wait_event_interruptible(serport->wait, !serport->serio.type);
 	serio_unregister_port(&serport->serio);
 
+	clear_bit(SERPORT_BUSY, &serport->flags);
+
 	return 0;
 }
 
@@ -195,10 +167,8 @@ static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsi
 {
 	struct serport *serport = (struct serport*) tty->disc_data;
 	
-	switch (cmd) {
-		case SPIOCSTYPE:
-			return get_user(serport->serio.type, (unsigned long *) arg);
-	}
+	if (cmd == SPIOCSTYPE)
+		return get_user(serport->serio.type, (unsigned long *) arg);
 
 	return -EINVAL;
 }
@@ -208,7 +178,6 @@ static void serport_ldisc_write_wakeup(struct tty_struct * tty)
 	struct serport *sp = (struct serport *) tty->disc_data;
 
 	serio_dev_write_wakeup(&sp->serio);
-
 }
 
 /*

drivers/usb/input/hid-lgff.c

@@ -45,9 +45,6 @@
 
 #define RUN_AT(t) (jiffies + (t))
 
-/* Transmition state */
-#define XMIT_RUNNING 0
-
 /* Effect status */
 #define EFFECT_STARTED 0     /* Effect is going to play after some time
 				(ff_replay.delay) */