Commit 44bc40e1 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 platform changes from Ingo Molnar:
 "This tree includes assorted platform driver updates and a preparatory
  series for a platform with custom DMA remapping semantics (sta2x11 I/O
  hub)."

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vsmp: Fix number of CPUs when vsmp is disabled
  keyboard: Use BIOS Keyboard variable to set Numlock
  x86/olpc/xo1/sci: Report RTC wakeup events
  x86/olpc/xo1/sci: Produce wakeup events for buttons and switches
  x86, platform: Initial support for sta2x11 I/O hub
  x86: Introduce CONFIG_X86_DMA_REMAP
  x86-32: Introduce CONFIG_X86_DEV_DMA_OPS
parents 02171b4a ead91d4b
#ifndef _ASM_PARISC_KBDLEDS_H
#define _ASM_PARISC_KBDLEDS_H
/*
* On HIL keyboards of PARISC machines there is no NumLock key and
* everyone expects the keypad to be used for numbers. That's why
* we can safely turn on the NUMLOCK bit.
*/
static inline int kbd_defleds(void)
{
#if defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD)
return 1 << VC_NUMLOCK;
#else
return 0;
#endif
}
#endif /* _ASM_PARISC_KBDLEDS_H */
......@@ -12,6 +12,7 @@ config X86_32
config X86_64
def_bool 64BIT
select X86_DEV_DMA_OPS
### Arch settings
config X86
......@@ -327,6 +328,7 @@ config X86_EXTENDED_PLATFORM
NUMAQ (IBM/Sequent)
RDC R-321x SoC
SGI 320/540 (Visual Workstation)
STA2X11-based (e.g. Northville)
Summit/EXA (IBM x440)
Unisys ES7000 IA32 series
Moorestown MID devices
......@@ -373,6 +375,7 @@ config X86_VSMP
select PARAVIRT
depends on X86_64 && PCI
depends on X86_EXTENDED_PLATFORM
depends on SMP
---help---
Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
supposed to run on these EM64T-based machines. Only choose this option
......@@ -459,10 +462,10 @@ config X86_32_NON_STANDARD
depends on X86_32 && SMP
depends on X86_EXTENDED_PLATFORM
---help---
This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
subarchitectures. It is intended for a generic binary kernel.
if you select them all, kernel will probe it one by one. and will
fallback to default.
This option compiles in the NUMAQ, Summit, bigsmp, ES7000,
STA2X11, default subarchitectures. It is intended for a generic
binary kernel. If you select them all, kernel will probe it
one by one and will fallback to default.
# Alphabetically sorted list of Non standard 32 bit platforms
......@@ -502,6 +505,22 @@ config X86_VISWS
A kernel compiled for the Visual Workstation will run on general
PCs as well. See <file:Documentation/sgi-visws.txt> for details.
config STA2X11
bool "STA2X11 Companion Chip Support"
depends on X86_32_NON_STANDARD && PCI
select X86_DEV_DMA_OPS
select X86_DMA_REMAP
select SWIOTLB
select MFD_STA2X11
select ARCH_REQUIRE_GPIOLIB
default n
---help---
This adds support for boards based on the STA2X11 IO-Hub,
a.k.a. "ConneXt". The chip is used in place of the standard
PC chipset, so all "standard" peripherals are missing. If this
option is selected the kernel will still be able to boot on
standard PC machines.
config X86_SUMMIT
bool "Summit/EXA (IBM x440)"
depends on X86_32_NON_STANDARD
......@@ -2210,6 +2229,14 @@ config HAVE_TEXT_POKE_SMP
bool
select STOP_MACHINE if SMP
config X86_DEV_DMA_OPS
bool
depends on X86_64 || STA2X11
config X86_DMA_REMAP
bool
depends on STA2X11
source "net/Kconfig"
source "drivers/Kconfig"
......
......@@ -57,14 +57,20 @@ static void copy_boot_params(void)
}
/*
* Set the keyboard repeat rate to maximum. Unclear why this
* Query the keyboard lock status as given by the BIOS, and
* set the keyboard repeat rate to maximum. Unclear why the latter
* is done here; this might be possible to kill off as stale code.
*/
static void keyboard_set_repeat(void)
static void keyboard_init(void)
{
struct biosregs ireg;
struct biosregs ireg, oreg;
initregs(&ireg);
ireg.ax = 0x0305;
ireg.ah = 0x02; /* Get keyboard status */
intcall(0x16, &ireg, &oreg);
boot_params.kbd_status = oreg.al;
ireg.ax = 0x0305; /* Set keyboard repeat rate */
intcall(0x16, &ireg, NULL);
}
......@@ -151,8 +157,8 @@ void main(void)
/* Detect memory layout */
detect_memory();
/* Set keyboard repeat rate (why?) */
keyboard_set_repeat();
/* Set keyboard repeat rate (why?) and query the lock flags */
keyboard_init();
/* Query MCA information */
query_mca();
......
......@@ -112,7 +112,8 @@ struct boot_params {
__u8 e820_entries; /* 0x1e8 */
__u8 eddbuf_entries; /* 0x1e9 */
__u8 edd_mbr_sig_buf_entries; /* 0x1ea */
__u8 _pad6[6]; /* 0x1eb */
__u8 kbd_status; /* 0x1eb */
__u8 _pad6[5]; /* 0x1ec */
struct setup_header hdr; /* setup header */ /* 0x1f1 */
__u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)];
__u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */
......
......@@ -5,8 +5,8 @@ struct dev_archdata {
#ifdef CONFIG_ACPI
void *acpi_handle;
#endif
#ifdef CONFIG_X86_64
struct dma_map_ops *dma_ops;
#ifdef CONFIG_X86_DEV_DMA_OPS
struct dma_map_ops *dma_ops;
#endif
#if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU)
void *iommu; /* hook for IOMMU specific extension */
......
......@@ -30,7 +30,7 @@ extern struct dma_map_ops *dma_ops;
static inline struct dma_map_ops *get_dma_ops(struct device *dev)
{
#ifdef CONFIG_X86_32
#ifndef CONFIG_X86_DEV_DMA_OPS
return dma_ops;
#else
if (unlikely(!dev) || !dev->archdata.dma_ops)
......@@ -62,6 +62,12 @@ extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_addr, gfp_t flag,
struct dma_attrs *attrs);
#ifdef CONFIG_X86_DMA_REMAP /* Platform code defines bridge-specific code */
extern bool dma_capable(struct device *dev, dma_addr_t addr, size_t size);
extern dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
extern phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
#else
static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
{
if (!dev->dma_mask)
......@@ -79,6 +85,7 @@ static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
{
return daddr;
}
#endif /* CONFIG_X86_DMA_REMAP */
static inline void
dma_cache_sync(struct device *dev, void *vaddr, size_t size,
......
#ifndef _ASM_X86_KBDLEDS_H
#define _ASM_X86_KBDLEDS_H
/*
* Some laptops take the 789uiojklm,. keys as number pad when NumLock is on.
* This seems a good reason to start with NumLock off. That's why on X86 we
* ask the bios for the correct state.
*/
#include <asm/setup.h>
static inline int kbd_defleds(void)
{
return boot_params.kbd_status & 0x20 ? (1 << VC_NUMLOCK) : 0;
}
#endif /* _ASM_X86_KBDLEDS_H */
......@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/pci_ids.h>
#include <linux/pci_regs.h>
#include <linux/smp.h>
#include <asm/apic.h>
#include <asm/pci-direct.h>
......@@ -22,6 +23,8 @@
#include <asm/paravirt.h>
#include <asm/setup.h>
#define TOPOLOGY_REGISTER_OFFSET 0x10
#if defined CONFIG_PCI && defined CONFIG_PARAVIRT
/*
* Interrupt control on vSMPowered systems:
......@@ -149,12 +152,49 @@ int is_vsmp_box(void)
return 0;
}
#endif
static void __init vsmp_cap_cpus(void)
{
#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP)
void __iomem *address;
unsigned int cfg, topology, node_shift, maxcpus;
/*
* CONFIG_X86_VSMP is not configured, so limit the number CPUs to the
* ones present in the first board, unless explicitly overridden by
* setup_max_cpus
*/
if (setup_max_cpus != NR_CPUS)
return;
/* Read the vSMP Foundation topology register */
cfg = read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0);
address = early_ioremap(cfg + TOPOLOGY_REGISTER_OFFSET, 4);
if (WARN_ON(!address))
return;
topology = readl(address);
node_shift = (topology >> 16) & 0x7;
if (!node_shift)
/* The value 0 should be decoded as 8 */
node_shift = 8;
maxcpus = (topology & ((1 << node_shift) - 1)) + 1;
pr_info("vSMP CTL: Capping CPUs to %d (CONFIG_X86_VSMP is unset)\n",
maxcpus);
setup_max_cpus = maxcpus;
early_iounmap(address, 4);
#endif
}
void __init vsmp_init(void)
{
detect_vsmp_box();
if (!is_vsmp_box())
return;
vsmp_cap_cpus();
set_vsmp_pv_ops();
return;
}
......@@ -11,6 +11,8 @@ obj-$(CONFIG_X86_INTEL_CE) += ce4100.o
obj-$(CONFIG_ACPI) += acpi.o
obj-y += legacy.o irq.o
obj-$(CONFIG_STA2X11) += sta2x11-fixup.o
obj-$(CONFIG_X86_VISWS) += visws.o
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
......
This diff is collapsed.
......@@ -18,6 +18,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_wakeup.h>
#include <linux/mfd/core.h>
#include <linux/power_supply.h>
#include <linux/suspend.h>
......@@ -83,8 +84,12 @@ static void send_ebook_state(void)
return;
}
if (!!test_bit(SW_TABLET_MODE, ebook_switch_idev->sw) == state)
return; /* Nothing new to report. */
input_report_switch(ebook_switch_idev, SW_TABLET_MODE, state);
input_sync(ebook_switch_idev);
pm_wakeup_event(&ebook_switch_idev->dev, 0);
}
static void flip_lid_inverter(void)
......@@ -123,8 +128,12 @@ static void detect_lid_state(void)
/* Report current lid switch state through input layer */
static void send_lid_state(void)
{
if (!!test_bit(SW_LID, lid_switch_idev->sw) == !lid_open)
return; /* Nothing new to report. */
input_report_switch(lid_switch_idev, SW_LID, !lid_open);
input_sync(lid_switch_idev);
pm_wakeup_event(&lid_switch_idev->dev, 0);
}
static ssize_t lid_wake_mode_show(struct device *dev,
......@@ -213,11 +222,30 @@ static irqreturn_t xo1_sci_intr(int irq, void *dev_id)
dev_dbg(&pdev->dev, "sts %x gpe %x\n", sts, gpe);
if (sts & CS5536_PWRBTN_FLAG && !(sts & CS5536_WAK_FLAG)) {
input_report_key(power_button_idev, KEY_POWER, 1);
input_sync(power_button_idev);
input_report_key(power_button_idev, KEY_POWER, 0);
input_sync(power_button_idev);
if (sts & CS5536_PWRBTN_FLAG) {
if (!(sts & CS5536_WAK_FLAG)) {
/* Only report power button input when it was pressed
* during regular operation (as opposed to when it
* was used to wake the system). */
input_report_key(power_button_idev, KEY_POWER, 1);
input_sync(power_button_idev);
input_report_key(power_button_idev, KEY_POWER, 0);
input_sync(power_button_idev);
}
/* Report the wakeup event in all cases. */
pm_wakeup_event(&power_button_idev->dev, 0);
}
if ((sts & (CS5536_RTC_FLAG | CS5536_WAK_FLAG)) ==
(CS5536_RTC_FLAG | CS5536_WAK_FLAG)) {
/* When the system is woken by the RTC alarm, report the
* event on the rtc device. */
struct device *rtc = bus_find_device_by_name(
&platform_bus_type, NULL, "rtc_cmos");
if (rtc) {
pm_wakeup_event(rtc, 0);
put_device(rtc);
}
}
if (gpe & CS5536_GPIOM7_PME_FLAG) { /* EC GPIO */
......@@ -310,9 +338,10 @@ static int __devinit setup_sci_interrupt(struct platform_device *pdev)
outb(lo, CS5536_PIC_INT_SEL2);
}
/* Enable SCI from power button, and clear pending interrupts */
/* Enable interesting SCI events, and clear pending interrupts */
sts = inl(acpi_base + CS5536_PM1_STS);
outl((CS5536_PM_PWRBTN << 16) | 0xffff, acpi_base + CS5536_PM1_STS);
outl(((CS5536_PM_PWRBTN | CS5536_PM_RTC) << 16) | 0xffff,
acpi_base + CS5536_PM1_STS);
r = request_irq(sci_irq, xo1_sci_intr, 0, DRV_NAME, pdev);
if (r)
......
......@@ -53,17 +53,13 @@ extern void ctrl_alt_del(void);
#define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META))
/*
* Some laptops take the 789uiojklm,. keys as number pad when NumLock is on.
* This seems a good reason to start with NumLock off. On HIL keyboards
* of PARISC machines however there is no NumLock key and everyone expects the
* keypad to be used for numbers.
*/
#if defined(CONFIG_PARISC) && (defined(CONFIG_KEYBOARD_HIL) || defined(CONFIG_KEYBOARD_HIL_OLD))
#define KBD_DEFLEDS (1 << VC_NUMLOCK)
#if defined(CONFIG_X86) || defined(CONFIG_PARISC)
#include <asm/kbdleds.h>
#else
#define KBD_DEFLEDS 0
static inline int kbd_defleds(void)
{
return 0;
}
#endif
#define KBD_DEFLOCK 0
......@@ -1524,8 +1520,8 @@ int __init kbd_init(void)
int error;
for (i = 0; i < MAX_NR_CONSOLES; i++) {
kbd_table[i].ledflagstate = KBD_DEFLEDS;
kbd_table[i].default_ledflagstate = KBD_DEFLEDS;
kbd_table[i].ledflagstate = kbd_defleds();
kbd_table[i].default_ledflagstate = kbd_defleds();
kbd_table[i].ledmode = LED_SHOW_FLAGS;
kbd_table[i].lockstate = KBD_DEFLOCK;
kbd_table[i].slockstate = 0;
......
......@@ -95,6 +95,7 @@ static inline int cs5535_pic_unreqz_select_high(unsigned int group,
/* CS5536_PM1_STS bits */
#define CS5536_WAK_FLAG (1 << 15)
#define CS5536_RTC_FLAG (1 << 10)
#define CS5536_PWRBTN_FLAG (1 << 8)
/* CS5536_PM1_EN bits */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment