rtw88: add support for random mac scan

When driver uses random mac address to scan, the unicast probe response
will not be received because the addr1 is not matched. Configure port
address by requested mac address to receive probe response from AP.

To support random mac scan, we need to configure the mac address during
scan period to receive unicast prop_resp. After scan is completed,
configure the mac address back to the original one that the port used.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtw88/mac80211.c

@@ -446,20 +446,39 @@ static void rtw_ops_sw_scan_start(struct ieee80211_hw *hw,
 {
 	struct rtw_dev *rtwdev = hw->priv;
 	struct rtw_vif *rtwvif = (struct rtw_vif *)vif->drv_priv;
+	u32 config = 0;
 
 	rtw_leave_lps(rtwdev, rtwvif);
 
+	mutex_lock(&rtwdev->mutex);
+
+	ether_addr_copy(rtwvif->mac_addr, mac_addr);
+	config |= PORT_SET_MAC_ADDR;
+	rtw_vif_port_config(rtwdev, rtwvif, config);
+
 	rtw_flag_set(rtwdev, RTW_FLAG_DIG_DISABLE);
 	rtw_flag_set(rtwdev, RTW_FLAG_SCANNING);
+
+	mutex_unlock(&rtwdev->mutex);
 }
 
 static void rtw_ops_sw_scan_complete(struct ieee80211_hw *hw,
 				     struct ieee80211_vif *vif)
 {
 	struct rtw_dev *rtwdev = hw->priv;
+	struct rtw_vif *rtwvif = (struct rtw_vif *)vif->drv_priv;
+	u32 config = 0;
+
+	mutex_lock(&rtwdev->mutex);
 
 	rtw_flag_clear(rtwdev, RTW_FLAG_SCANNING);
 	rtw_flag_clear(rtwdev, RTW_FLAG_DIG_DISABLE);
+
+	ether_addr_copy(rtwvif->mac_addr, vif->addr);
+	config |= PORT_SET_MAC_ADDR;
+	rtw_vif_port_config(rtwdev, rtwvif, config);
+
+	mutex_unlock(&rtwdev->mutex);
 }
 
 const struct ieee80211_ops rtw_ops = {

drivers/net/wireless/realtek/rtw88/main.c

@@ -1178,6 +1178,8 @@ int rtw_register_hw(struct rtw_dev *rtwdev, struct ieee80211_hw *hw)
 	hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS |
 			    WIPHY_FLAG_TDLS_EXTERNAL_SETUP;
 
+	hw->wiphy->features |= NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
+
 	rtw_set_supported_band(hw, rtwdev->chip);
 	SET_IEEE80211_PERM_ADDR(hw, rtwdev->efuse.addr);