Commit 44ded7ca authored by Jakub Kicinski's avatar Jakub Kicinski

Merge branch 'net-dsa-b53-clean-up-cpu-imp-ports'

Rafał Miłecki says:

====================
net: dsa: b53: Clean up CPU/IMP ports

This has been tested on:

1. Luxul XBR-4500 with used CPU port 5
[    8.361438] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 0

2. Netgear R8000 with used CPU port 8
[    4.453858] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5

====================

Link: https://lore.kernel.org/r/20210916120354.20338-1-zajec5@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parents 561bed68 7d5af564
......@@ -1222,7 +1222,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
return;
/* Enable flow control on BCM5301x's CPU port */
if (is5301x(dev) && port == dev->cpu_port)
if (is5301x(dev) && dsa_is_cpu_port(ds, port))
tx_pause = rx_pause = true;
if (phydev->pause) {
......@@ -1291,12 +1291,6 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
return;
}
}
} else if (is5301x(dev)) {
if (port != dev->cpu_port) {
b53_force_port_config(dev, dev->cpu_port, 2000,
DUPLEX_FULL, true, true);
b53_force_link(dev, dev->cpu_port, 1);
}
}
/* Re-negotiate EEE if it was enabled already */
......@@ -2302,33 +2296,30 @@ static const struct b53_chip_data b53_switch_chips[] = {
.chip_id = BCM5325_DEVICE_ID,
.dev_name = "BCM5325",
.vlans = 16,
.enabled_ports = 0x1f,
.enabled_ports = 0x3f,
.arl_bins = 2,
.arl_buckets = 1024,
.imp_port = 5,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
{
.chip_id = BCM5365_DEVICE_ID,
.dev_name = "BCM5365",
.vlans = 256,
.enabled_ports = 0x1f,
.enabled_ports = 0x3f,
.arl_bins = 2,
.arl_buckets = 1024,
.imp_port = 5,
.cpu_port = B53_CPU_PORT_25,
.duplex_reg = B53_DUPLEX_STAT_FE,
},
{
.chip_id = BCM5389_DEVICE_ID,
.dev_name = "BCM5389",
.vlans = 4096,
.enabled_ports = 0x1f,
.enabled_ports = 0x11f,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2338,11 +2329,10 @@ static const struct b53_chip_data b53_switch_chips[] = {
.chip_id = BCM5395_DEVICE_ID,
.dev_name = "BCM5395",
.vlans = 4096,
.enabled_ports = 0x1f,
.enabled_ports = 0x11f,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2352,11 +2342,10 @@ static const struct b53_chip_data b53_switch_chips[] = {
.chip_id = BCM5397_DEVICE_ID,
.dev_name = "BCM5397",
.vlans = 4096,
.enabled_ports = 0x1f,
.enabled_ports = 0x11f,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2366,11 +2355,10 @@ static const struct b53_chip_data b53_switch_chips[] = {
.chip_id = BCM5398_DEVICE_ID,
.dev_name = "BCM5398",
.vlans = 4096,
.enabled_ports = 0x7f,
.enabled_ports = 0x17f,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_9798,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2380,12 +2368,11 @@ static const struct b53_chip_data b53_switch_chips[] = {
.chip_id = BCM53115_DEVICE_ID,
.dev_name = "BCM53115",
.vlans = 4096,
.enabled_ports = 0x1f,
.enabled_ports = 0x11f,
.arl_bins = 4,
.arl_buckets = 1024,
.vta_regs = B53_VTA_REGS,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
......@@ -2394,11 +2381,10 @@ static const struct b53_chip_data b53_switch_chips[] = {
.chip_id = BCM53125_DEVICE_ID,
.dev_name = "BCM53125",
.vlans = 4096,
.enabled_ports = 0xff,
.enabled_ports = 0x1ff,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2412,7 +2398,6 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2426,7 +2411,6 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS_63XX,
.duplex_reg = B53_DUPLEX_STAT_63XX,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
......@@ -2436,11 +2420,10 @@ static const struct b53_chip_data b53_switch_chips[] = {
.chip_id = BCM53010_DEVICE_ID,
.dev_name = "BCM53010",
.vlans = 4096,
.enabled_ports = 0x1f,
.enabled_ports = 0x1bf,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2454,7 +2437,6 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2468,7 +2450,6 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2478,11 +2459,10 @@ static const struct b53_chip_data b53_switch_chips[] = {
.chip_id = BCM53018_DEVICE_ID,
.dev_name = "BCM53018",
.vlans = 4096,
.enabled_ports = 0x1f,
.enabled_ports = 0x1bf,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2492,11 +2472,10 @@ static const struct b53_chip_data b53_switch_chips[] = {
.chip_id = BCM53019_DEVICE_ID,
.dev_name = "BCM53019",
.vlans = 4096,
.enabled_ports = 0x1f,
.enabled_ports = 0x1bf,
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2510,7 +2489,6 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2524,7 +2502,6 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2539,7 +2516,6 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 256,
.imp_port = 8,
.cpu_port = 8, /* TODO: ports 4, 5, 8 */
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2553,7 +2529,6 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 1024,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2567,7 +2542,6 @@ static const struct b53_chip_data b53_switch_chips[] = {
.arl_bins = 4,
.arl_buckets = 256,
.imp_port = 8,
.cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
......@@ -2593,7 +2567,6 @@ static int b53_switch_init(struct b53_device *dev)
dev->vta_regs[2] = chip->vta_regs[2];
dev->jumbo_pm_reg = chip->jumbo_pm_reg;
dev->imp_port = chip->imp_port;
dev->cpu_port = chip->cpu_port;
dev->num_vlans = chip->vlans;
dev->num_arl_bins = chip->arl_bins;
dev->num_arl_buckets = chip->arl_buckets;
......@@ -2625,16 +2598,8 @@ static int b53_switch_init(struct b53_device *dev)
break;
#endif
}
} else if (dev->chip_id == BCM53115_DEVICE_ID) {
u64 strap_value;
b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value);
/* use second IMP port if GMII is enabled */
if (strap_value & SV_GMII_CTRL_115)
dev->cpu_port = 5;
}
dev->enabled_ports |= BIT(dev->cpu_port);
dev->num_ports = fls(dev->enabled_ports);
dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
......
......@@ -124,7 +124,6 @@ struct b53_device {
/* used ports mask */
u16 enabled_ports;
unsigned int imp_port;
unsigned int cpu_port;
/* connect specific data */
u8 current_page;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment