Commit 4520af41 authored by Shengjiu Wang's avatar Shengjiu Wang Committed by Mark Brown

ASoC: fsl_asrc: Support new property fsl,asrc-format

In order to align with new ESARC, we add new property fsl,asrc-format.
The fsl,asrc-format can replace the fsl,asrc-width, driver
can accept format from devicetree, don't need to convert it to
format through width.
Signed-off-by: default avatarShengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: default avatarNicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/2be9664768f32982ba4f71e49749f7390096ac9f.1587038908.git.shengjiu.wang@nxp.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 859e3643
......@@ -589,7 +589,6 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
unsigned int channels = params_channels(params);
unsigned int rate = params_rate(params);
struct asrc_config config;
snd_pcm_format_t format;
int ret;
ret = fsl_asrc_request_pair(channels, pair);
......@@ -600,11 +599,6 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
pair->config = &config;
if (asrc->asrc_width == 16)
format = SNDRV_PCM_FORMAT_S16_LE;
else
format = SNDRV_PCM_FORMAT_S24_LE;
config.pair = pair->index;
config.channel_num = channels;
config.inclk = INCLK_NONE;
......@@ -612,11 +606,11 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
config.input_format = params_format(params);
config.output_format = format;
config.output_format = asrc->asrc_format;
config.input_sample_rate = rate;
config.output_sample_rate = asrc->asrc_rate;
} else {
config.input_format = format;
config.input_format = asrc->asrc_format;
config.output_format = params_format(params);
config.input_sample_rate = asrc->asrc_rate;
config.output_sample_rate = rate;
......@@ -946,6 +940,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
int irq, ret, i;
u32 map_idx;
char tmp[16];
u32 width;
asrc = devm_kzalloc(&pdev->dev, sizeof(*asrc), GFP_KERNEL);
if (!asrc)
......@@ -1052,16 +1047,32 @@ static int fsl_asrc_probe(struct platform_device *pdev)
return ret;
}
ret = of_property_read_u32(np, "fsl,asrc-width",
&asrc->asrc_width);
ret = of_property_read_u32(np, "fsl,asrc-format", &asrc->asrc_format);
if (ret) {
dev_err(&pdev->dev, "failed to get output width\n");
return ret;
ret = of_property_read_u32(np, "fsl,asrc-width", &width);
if (ret) {
dev_err(&pdev->dev, "failed to decide output format\n");
return ret;
}
switch (width) {
case 16:
asrc->asrc_format = SNDRV_PCM_FORMAT_S16_LE;
break;
case 24:
asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
break;
default:
dev_warn(&pdev->dev,
"unsupported width, use default S24_LE\n");
asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
break;
}
}
if (asrc->asrc_width != 16 && asrc->asrc_width != 24) {
dev_warn(&pdev->dev, "unsupported width, switching to 24bit\n");
asrc->asrc_width = 24;
if (!(FSL_ASRC_FORMATS & (1ULL << asrc->asrc_format))) {
dev_warn(&pdev->dev, "unsupported width, use default S24_LE\n");
asrc->asrc_format = SNDRV_PCM_FORMAT_S24_LE;
}
platform_set_drvdata(pdev, asrc);
......
......@@ -493,7 +493,7 @@ struct fsl_asrc_pair {
* @channel_avail: non-occupied channel numbers
* @clk_map: clock map for input/output clock
* @asrc_rate: default sample rate for ASoC Back-Ends
* @asrc_width: default sample width for ASoC Back-Ends
* @asrc_format: default sample format for ASoC Back-Ends
* @regcache_cfg: store register value of REG_ASRCFG
*/
struct fsl_asrc {
......@@ -514,7 +514,7 @@ struct fsl_asrc {
unsigned char *clk_map[2];
int asrc_rate;
int asrc_width;
snd_pcm_format_t asrc_format;
u32 regcache_cfg;
};
......
......@@ -146,7 +146,7 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
struct device *dev_be;
u8 dir = tx ? OUT : IN;
dma_cap_mask_t mask;
int ret;
int ret, width;
/* Fetch the Back-End dma_data from DPCM */
for_each_dpcm_be(rtd, stream, dpcm) {
......@@ -230,10 +230,19 @@ static int fsl_asrc_dma_hw_params(struct snd_soc_component *component,
return -EINVAL;
}
if (asrc->asrc_width == 16)
width = snd_pcm_format_physical_width(asrc->asrc_format);
if (width < 8 || width > 64)
return -EINVAL;
else if (width == 8)
buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
else if (width == 16)
buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
else
else if (width == 24)
buswidth = DMA_SLAVE_BUSWIDTH_3_BYTES;
else if (width <= 32)
buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
else
buswidth = DMA_SLAVE_BUSWIDTH_8_BYTES;
config_be.direction = DMA_DEV_TO_DEV;
config_be.src_addr_width = buswidth;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment