Commit 4573acbc authored by Guenter Roeck's avatar Guenter Roeck Committed by Guenter Roeck

hwmon: (it87) Make temp3 attribute conditional for IT8782F

On IT8782F, temp3 is only supported if UART6 is disabled.
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Acked-by: default avatarJean Delvare <khali@linux-fr.org>
parent 62a1d05f
......@@ -218,6 +218,7 @@ static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
#define IT87_REG_VIN_ENABLE 0x50
#define IT87_REG_TEMP_ENABLE 0x51
#define IT87_REG_TEMP_EXTRA 0x55
#define IT87_REG_BEEP_ENABLE 0x5c
#define IT87_REG_CHIPID 0x58
......@@ -238,6 +239,7 @@ struct it87_sio_data {
u8 skip_vid;
u8 skip_fan;
u8 skip_pwm;
u8 skip_temp;
};
/*
......@@ -262,6 +264,7 @@ struct it87_data {
u8 has_fan; /* Bitfield, fans enabled */
u16 fan[5]; /* Register values, possibly combined */
u16 fan_min[5]; /* Register values, possibly combined */
u8 has_temp; /* Bitfield, temp sensors enabled */
s8 temp[3]; /* Register value */
s8 temp_high[3]; /* Register value */
s8 temp_low[3]; /* Register value */
......@@ -1438,23 +1441,37 @@ static const struct attribute_group it87_group_in[9] = {
{ .attrs = it87_attributes_in[8] },
};
static struct attribute *it87_attributes[] = {
static struct attribute *it87_attributes_temp[3][6] = {
{
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp3_max.dev_attr.attr,
&sensor_dev_attr_temp1_min.dev_attr.attr,
&sensor_dev_attr_temp2_min.dev_attr.attr,
&sensor_dev_attr_temp3_min.dev_attr.attr,
&sensor_dev_attr_temp1_type.dev_attr.attr,
&sensor_dev_attr_temp2_type.dev_attr.attr,
&sensor_dev_attr_temp3_type.dev_attr.attr,
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
NULL
} , {
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp2_min.dev_attr.attr,
&sensor_dev_attr_temp2_type.dev_attr.attr,
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
NULL
} , {
&sensor_dev_attr_temp3_input.dev_attr.attr,
&sensor_dev_attr_temp3_max.dev_attr.attr,
&sensor_dev_attr_temp3_min.dev_attr.attr,
&sensor_dev_attr_temp3_type.dev_attr.attr,
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
NULL
} };
static const struct attribute_group it87_group_temp[3] = {
{ .attrs = it87_attributes_temp[0] },
{ .attrs = it87_attributes_temp[1] },
{ .attrs = it87_attributes_temp[2] },
};
static struct attribute *it87_attributes[] = {
&dev_attr_alarms.attr,
&sensor_dev_attr_intrusion0_alarm.dev_attr.attr,
&dev_attr_name.attr,
......@@ -1477,15 +1494,10 @@ static struct attribute *it87_attributes_in_beep[] = {
NULL
};
static struct attribute *it87_attributes_beep[] = {
static struct attribute *it87_attributes_temp_beep[] = {
&sensor_dev_attr_temp1_beep.dev_attr.attr,
&sensor_dev_attr_temp2_beep.dev_attr.attr,
&sensor_dev_attr_temp3_beep.dev_attr.attr,
NULL
};
static const struct attribute_group it87_group_beep = {
.attrs = it87_attributes_beep,
};
static struct attribute *it87_attributes_fan16[5][3+1] = { {
......@@ -1870,9 +1882,15 @@ static int __init it87_find(unsigned short *address,
* On IT8782F, UART6 pins overlap with VIN5, VIN6, and VIN7.
* While VIN7 can be routed to the internal voltage divider,
* VIN5 and VIN6 are not available if UART6 is enabled.
*
* Also, temp3 is not available if UART6 is enabled and TEMPIN3
* is the temperature source. Since we can not read the
* temperature source here, skip_temp is preliminary.
*/
if (uart6)
if (uart6) {
sio_data->skip_in |= (1 << 5) | (1 << 6);
sio_data->skip_temp |= (1 << 2);
}
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
}
......@@ -1919,8 +1937,14 @@ static void it87_remove_files(struct device *dev)
sysfs_remove_file(&dev->kobj,
it87_attributes_in_beep[i]);
}
if (sio_data->beep_pin)
sysfs_remove_group(&dev->kobj, &it87_group_beep);
for (i = 0; i < 3; i++) {
if (!(data->has_temp & (1 << i)))
continue;
sysfs_remove_group(&dev->kobj, &it87_group_temp[i]);
if (sio_data->beep_pin)
sysfs_remove_file(&dev->kobj,
it87_attributes_temp_beep[i]);
}
for (i = 0; i < 5; i++) {
if (!(data->has_fan & (1 << i)))
continue;
......@@ -2009,6 +2033,13 @@ static int __devinit it87_probe(struct platform_device *pdev)
data->in_scaled |= (1 << 7); /* in7 is VCCH5V */
}
data->has_temp = 0x07;
if (sio_data->skip_temp & (1 << 2)) {
if (sio_data->type == it8782
&& !(it87_read_value(data, IT87_REG_TEMP_EXTRA) & 0x80))
data->has_temp &= ~(1 << 2);
}
/* Initialize the IT87 chip */
it87_init_device(pdev);
......@@ -2031,10 +2062,18 @@ static int __devinit it87_probe(struct platform_device *pdev)
}
}
if (sio_data->beep_pin) {
err = sysfs_create_group(&dev->kobj, &it87_group_beep);
for (i = 0; i < 3; i++) {
if (!(data->has_temp & (1 << i)))
continue;
err = sysfs_create_group(&dev->kobj, &it87_group_temp[i]);
if (err)
goto error;
if (sio_data->beep_pin) {
err = sysfs_create_file(&dev->kobj,
it87_attributes_temp_beep[i]);
if (err)
goto error;
}
}
/* Do not create fan files for disabled fans */
......@@ -2378,6 +2417,8 @@ static struct it87_data *it87_update_device(struct device *dev)
}
}
for (i = 0; i < 3; i++) {
if (!(data->has_temp & (1 << i)))
continue;
data->temp[i] =
it87_read_value(data, IT87_REG_TEMP(i));
data->temp_high[i] =
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment