UBUNTU: Import OpenNSL v3.1.0.17

BugLink: https://launchpad.net/bugs/1665783Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com>
Acked-by: Brad Figg <brad.figg@canonical.com>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>

ubuntu/opennsl/OpenNSL/LEGAL_TERMS

+The software content under this Broadcom Switch / OpenNSL is divided into two
+parts, and each part has its respective license.
+
+One portion of the software is Broadcom Switch APIs is governed by the
+Apache 2.0 license. It is located at
+https://github.com/Broadcom-Switch/OpenNSL/Legal/LICENSE-Apache2.
+Such open source software will also expressly reference the Apache 2.0
+license at the beginning of the software file.
+
+The other portion of the software is called Broadcom Advanced Switch APIs.
+This software is governed by the Broadcom Advanced Switch APIs license.
+This license is set out in the
+https://github.com/Broadcom-Switch/OpenNSL/Legal/LICENSE-Adv file. 
+
+Copyright 2015-2016 Broadcom Corporation. All rights reserved.
+

ubuntu/opennsl/OpenNSL/README.md

+OpenNSL
+======
+OpenNSL 3.1.0.x Switch Specification and Software
+
+Overview
+========
+
+Open Network Switch Layer (OpenNSL) is a library of network switch APIs that
+is openly available for programming Broadcom network switch silicon based
+platforms. These open APIs enable development of networking application
+software based on Broadcom network switch architecture based platforms.
+
+Documentation
+=============
+
+Detailed documentation can be found at http://Broadcom-Switch.github.io/OpenNSL/doc/html/index.html.
+
+Legal
+=====
+
+Please see LEGAL_TERMS for the use of and access of the Broadcom-Switch Page
+
+License
+=======
+
+Licenses for the software are available at the applicable level of the
+software repository under the "LICENSE" file

ubuntu/opennsl/OpenNSL/RELEASE

+opennsl-3.1.0.17

ubuntu/opennsl/OpenNSL/include/sal/commdefs.h

+/*********************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ********************************************************************
+ * File:        commdefs.h
+ * Details:     OpenNSL specific defines and options
+ *******************************************************************/
+
+#ifndef _SAL_COMMDEFS_H
+#define _SAL_COMMDEFS_H
+
+#define LIB_DLL_EXPORTED __attribute__((__visibility__("default")))
+
+#endif    /* !_SAL_COMMDEFS_H */

ubuntu/opennsl/OpenNSL/include/sal/driver.h

+/*********************************************************************
+*
+* (C) Copyright Broadcom Corporation 2013-2016
+*
+*  Licensed under the Apache License, Version 2.0 (the "License");
+*  you may not use this file except in compliance with the License.
+*  You may obtain a copy of the License at
+*
+*      http://www.apache.org/licenses/LICENSE-2.0
+*
+*  Unless required by applicable law or agreed to in writing, software
+*  distributed under the License is distributed on an "AS IS" BASIS,
+*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+*  See the License for the specific language governing permissions and
+*  limitations under the License.
+*
+**********************************************************************
+*
+* \file         driver.h
+*
+* \brief        This file contains utility functions called externally
+*
+**********************************************************************/
+#ifndef DRIVER_H
+#define DRIVER_H
+
+typedef struct opennsl_config_s
+{
+  char         *cfg_fname;  /* Configuration file name along with the path */
+  unsigned int flags;       /* OpenNSL boot up flags */
+  char         *wb_fname;   /* File to store warmboot configuration *
+                            * along with the path */
+  char         *rmcfg_fname; /* RM config file name along with the path */
+} opennsl_init_t;
+
+/*****************************************************************//**
+* \brief Function to initialize the switch.
+*
+* \param init       [IN]   pointer to structure that contains path to
+*                          platform customization config file, boot flags.
+*
+* \return OPENNSL_E_XXX     OpenNSL API return code
+********************************************************************/
+extern int opennsl_driver_init(opennsl_init_t *init);
+
+/**************************************************************************//**
+ * \brief To get platform boot flags
+ *
+ * \return      unsigned int    Boot flags
+ *****************************************************************************/
+extern unsigned int opennsl_driver_boot_flags_get(void);
+
+/*****************************************************************//**
+* \brief Bringup diagnostic shell prompt and process the input commands.
+*
+* \return OPENNSL_E_XXX     OpenNSL API return code
+********************************************************************/
+extern int opennsl_driver_shell();
+
+/*****************************************************************//**
+* \brief Process diagnostic shell command.
+*
+* \param commandBuf    [IN]    pointer to hold the diagnostic shell command
+*
+* \return OPENNSL_E_XXX     OpenNSL API return code
+********************************************************************/
+extern int opennsl_driver_process_command(char *commandBuf);
+
+extern char *readline(const char *prompt);
+#endif  /* DRIVER_H */

ubuntu/opennsl/OpenNSL/include/sal/types.h

+/*********************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *********************************************************************
+ * File:        types.h
+ * Details:     Type definitions
+ ********************************************************************/
+
+#ifndef _SAL_TYPES_H
+#define _SAL_TYPES_H
+
+#include <sal/compiler.h>
+
+/*
+ * Define platform-independent types
+ */
+
+#ifndef TRUE
+#define TRUE            1
+#endif
+
+#ifndef FALSE
+#define FALSE            0
+#endif
+
+#ifndef NULL
+#define NULL            0
+#endif
+
+#ifndef DONT_CARE
+#define DONT_CARE        0
+#endif
+
+#define VOL            volatile
+
+/*
+ * Define unsigned and signed integers with guaranteed sizes.
+ * Adjust if your compiler uses different sizes for short or int.
+ */
+
+typedef unsigned char        uint8;        /* 8-bit quantity  */
+typedef unsigned short        uint16;        /* 16-bit quantity */
+typedef unsigned int        uint32;        /* 32-bit quantity */
+typedef COMPILER_UINT64        uint64;        /* 64-bit quantity */
+
+typedef signed char        int8;        /* 8-bit quantity  */
+typedef signed short        int16;        /* 16-bit quantity */
+typedef signed int        int32;        /* 32-bit quantity */
+typedef COMPILER_INT64          int64;          /* 64-bit quantity */
+
+#define BITS2BYTES(x)        (((x) + 7) / 8)
+#define BITS2WORDS(x)        (((x) + 31) / 32)
+
+#define BYTES2BITS(x)        ((x) * 8)
+#define BYTES2WORDS(x)        (((x) + 3) / 4)
+
+#define WORDS2BITS(x)        ((x) * 32)
+#define WORDS2BYTES(x)        ((x) * 4)
+
+#define COUNTOF(ary)        ((int) (sizeof (ary) / sizeof ((ary)[0])))
+
+typedef uint32    sal_paddr_t;        /* Physical address (PCI address) */
+
+#ifdef PTRS_ARE_64BITS
+typedef uint64    sal_vaddr_t;        /* Virtual address (Host address) */
+#define PTR_TO_INT(x)        ((uint32)(((sal_vaddr_t)(x))&0xFFFFFFFF))
+#define PTR_HI_TO_INT(x)        ((uint32)((((sal_vaddr_t)(x))>>32)&0xFFFFFFFF))
+
+#else
+typedef uint32    sal_vaddr_t;        /* Virtual address (Host address) */
+#define PTR_TO_INT(x)        ((uint32)(x))
+#define PTR_HI_TO_INT(x)        (0)
+#endif
+
+#define INT_TO_PTR(x)        ((void *)((sal_vaddr_t)(x)))
+
+#define PTR_TO_UINTPTR(x)       ((sal_vaddr_t)(x))
+#define UINTPTR_TO_PTR(x)       ((void *)(x))
+
+typedef union
+{
+    uint8            u8;
+    uint16            u16;
+    uint32            u32;
+    uint64            u64;
+    sal_paddr_t        paddr;
+    sal_vaddr_t        vaddr;
+    void            *ptr;
+}                any_t;
+
+typedef uint8   sal_mac_addr_t[6];      /* MAC address */
+typedef uint32  sal_ip_addr_t;          /* IP Address */
+
+/* sal_mac_addr_t mac;  Just generate a list of the macs for display */
+#define SAL_MAC_ADDR_LIST(mac) \
+    mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]
+
+#define SAL_MACADDR_STR_LEN     18              /* Formatted MAC address */
+#define SAL_IPADDR_STR_LEN      16              /* Formatted IP address */
+
+
+/* Adjust justification for uint32 writes to fields */
+/* dst is an array name of type uint32 [] */
+#define SAL_MAC_ADDR_TO_UINT32(mac, dst) do {\
+        (dst)[0] = (((uint32)(mac)[2]) << 24 | \
+                  ((uint32)(mac)[3]) << 16 | \
+                  ((uint32)(mac)[4]) << 8 | \
+                  ((uint32)(mac)[5])); \
+        (dst)[1] = (((uint32)(mac)[0]) << 8 | \
+                  ((uint32)(mac)[1])); \
+    } while (0)
+
+/* Adjust justification for uint32 writes to fields */
+/* src is an array name of type uint32 [] */
+#define SAL_MAC_ADDR_FROM_UINT32(mac, src) do {\
+        (mac)[0] = (uint8) ((src)[1] >> 8 & 0xff); \
+        (mac)[1] = (uint8) ((src)[1] & 0xff); \
+        (mac)[2] = (uint8) ((src)[0] >> 24); \
+        (mac)[3] = (uint8) ((src)[0] >> 16 & 0xff); \
+        (mac)[4] = (uint8) ((src)[0] >> 8 & 0xff); \
+        (mac)[5] = (uint8) ((src)[0] & 0xff); \
+    } while (0)
+
+
+/* dst is a uint64 */
+#define SAL_MAC_ADDR_TO_UINT64(mac, dst) do {        \
+        uint32 _val[2];                              \
+        SAL_MAC_ADDR_TO_UINT32(mac, _val);           \
+        COMPILER_64_SET(dst, _val[1], _val[0]);      \
+    } while (0)
+
+/* src is a uint64 */
+#define SAL_MAC_ADDR_FROM_UINT64(mac, src) do {      \
+        uint32 _val[2];                              \
+        COMPILER_64_TO_32_LO(_val[0], src);          \
+        COMPILER_64_TO_32_HI(_val[1], src);          \
+        SAL_MAC_ADDR_FROM_UINT32(mac, _val);         \
+    } while (0)
+
+
+/* Adjust IP6 justification for uint32 field accesses */
+/* 
+ * These macros are used on IP6 "half addresses", being
+ * either the "upper" 64 bits or the "lower" 64 bits of
+ * an IPv6 address.
+ */
+
+/* dst is an array name of type uint32 [] */
+#define SAL_IP6_ADDR_HALF_TO_UINT32(ip6, dst) do {\
+        (dst)[1] = (((uint32)(ip6)[0]) << 24 | \
+                   ((uint32)(ip6)[1]) << 16 | \
+                   ((uint32)(ip6)[2]) << 8 | \
+                   ((uint32)(ip6)[3])); \
+        (dst)[0] = (((uint32)(ip6)[4]) << 24 | \
+                   ((uint32)(ip6)[5]) << 16 | \
+                   ((uint32)(ip6)[6]) << 8 | \
+                   ((uint32)(ip6)[7])); \
+    } while (0)
+
+/* src is an array name of type uint32 [] */
+#define SAL_IP6_ADDR_HALF_FROM_UINT32(ip6, src) do {\
+        (ip6)[0] = (uint8) ((src)[1] >> 24); \
+        (ip6)[1] = (uint8) ((src)[1] >> 16 & 0xff); \
+        (ip6)[2] = (uint8) ((src)[1] >> 8 & 0xff); \
+        (ip6)[3] = (uint8) ((src)[1] & 0xff); \
+        (ip6)[4] = (uint8) ((src)[0] >> 24); \
+        (ip6)[5] = (uint8) ((src)[0] >> 16 & 0xff); \
+        (ip6)[6] = (uint8) ((src)[0] >> 8 & 0xff); \
+        (ip6)[7] = (uint8) ((src)[0] & 0xff); \
+    } while (0)
+
+/* 
+ * These macros are used on full 128-bit IP6 addresses.
+ */
+
+/* dst is an array name of type uint32 [] */
+#define SAL_IP6_ADDR_TO_UINT32(ip6, dst) do {\
+        SAL_IP6_ADDR_HALF_TO_UINT32(&((ip6)[8]), (dst)); \
+        SAL_IP6_ADDR_HALF_TO_UINT32((ip6), &((dst)[2])); \
+    } while (0)
+
+/* src is an array name of type uint32 [] */
+#define SAL_IP6_ADDR_FROM_UINT32(ip6, src) do {\
+        SAL_IP6_ADDR_HALF_FROM_UINT32(&((ip6)[8]), (src)); \
+        SAL_IP6_ADDR_HALF_FROM_UINT32((ip6), &((src)[2])); \
+    } while (0)
+
+
+/* Device bus types */
+#define SAL_PCI_DEV_TYPE        0x00001 /* PCI device */
+#define SAL_SPI_DEV_TYPE        0x00002 /* SPI device */
+#define SAL_EB_DEV_TYPE         0x00004 /* EB device */
+#define SAL_ICS_DEV_TYPE        0x00008 /* ICS device */
+#define SAL_MII_DEV_TYPE        0x00010 /* MII device */
+#define SAL_RCPU_DEV_TYPE       0x00020 /* RCPU device */
+#define SAL_I2C_DEV_TYPE        0x00040 /* I2C device */
+#define SAL_AXI_DEV_TYPE        0x00080 /* AXI device */
+#define SAL_EMMI_DEV_TYPE       0x10000 /* EMMI device */
+#define SAL_DEV_BUS_TYPE_MASK   0xf00ff /* Odd for historical reasons */
+
+/* Device types */
+#define SAL_SWITCH_DEV_TYPE     0x00100 /* Switch device */
+#define SAL_ETHER_DEV_TYPE      0x00200 /* Ethernet device */
+#define SAL_CPU_DEV_TYPE        0x00400 /* CPU device */
+#define SAL_DEV_TYPE_MASK       0x00f00
+
+/* Access types */
+#define SAL_DEV_BUS_RD_16BIT    0x01000 /* 16 bit reads on bus */
+#define SAL_DEV_BUS_WR_16BIT    0x02000 /* 16 bit writes on bus */
+#define SAL_DEV_BUS_ALT         0x04000 /* Alternate access */
+#define SAL_DEV_BUS_MSI         0x08000 /* Message-signaled interrupts */
+#define SAL_DEV_FLAG_MASK       0x0f000
+
+/* BDE reserved mask (cannot be used by SAL) */
+#define SAL_DEV_BDE_MASK        0xff000000
+
+/* Backward compatibility */
+#define SAL_ET_DEV_TYPE         SAL_MII_DEV_TYPE
+
+/* Special access addresses */
+#define SAL_DEV_OP_EMMI_INIT    0x0fff1000
+
+#endif    /* !_SAL_TYPES_H */

ubuntu/opennsl/OpenNSL/include/sal/version.h

+/**************************************************************************
+*
+* (C) Copyright Broadcom Corporation 2013-2016
+*
+*  Licensed under the Apache License, Version 2.0 (the "License");
+*  you may not use this file except in compliance with the License.
+*  You may obtain a copy of the License at
+*
+*      http://www.apache.org/licenses/LICENSE-2.0
+*
+*  Unless required by applicable law or agreed to in writing, software
+*  distributed under the License is distributed on an "AS IS" BASIS,
+*  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+*  See the License for the specific language governing permissions and
+*  limitations under the License.
+*
+**************************************************************************/
+
+/*****************************************************************//**
+ *
+ *\file         version.h
+ *
+ *\brief        This file contains functions to get the build details
+ *
+ ********************************************************************/
+#ifndef _OPENNSL_VERSION_H
+#define _OPENNSL_VERSION_H
+
+#include "sal/commdefs.h"
+
+/*****************************************************************//**
+ *\brief   To get the OpenNSL version.
+ *
+ *\retval  char*  OpenNSL version
+ ********************************************************************/
+extern char* opennsl_version_get() LIB_DLL_EXPORTED;
+#endif  /* _OPENNSL_VERSION_H */
+

ubuntu/opennsl/OpenNSL/include/shared/bitop.h

+/*********************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ **********************************************************************
+ * File:        bitop.h
+ * Details:		Bit Array Operations
+ *********************************************************************/
+
+#ifndef _SHR_BITOP_H
+#define _SHR_BITOP_H
+
+#include <sal/types.h>
+
+/* Base type for declarations */
+#define    SHR_BITDCL        uint32
+#define    SHR_BITWID        32
+
+/* (internal) Number of SHR_BITDCLs needed to contain _max bits */
+#define    _SHR_BITDCLSIZE(_max)    (((_max) + SHR_BITWID - 1) / SHR_BITWID)
+
+/* Size for giving to malloc and memset to handle _max bits */
+#define    SHR_BITALLOCSIZE(_max) (_SHR_BITDCLSIZE(_max) * sizeof (SHR_BITDCL))
+
+/* Declare bit array _n of size _max bits */
+#define    SHR_BITDCLNAME(_n, _max) SHR_BITDCL    _n[_SHR_BITDCLSIZE(_max)]
+
+/* (internal) Generic operation macro on bit array _a, with bit _b */
+#define    _SHR_BITOP(_a, _b, _op)    \
+        (((_a)[(_b) / SHR_BITWID]) _op (1U << ((_b) % SHR_BITWID)))
+
+/* Specific operations */
+#define    SHR_BITGET(_a, _b)    _SHR_BITOP(_a, _b, &)
+#define    SHR_BITSET(_a, _b)    _SHR_BITOP(_a, _b, |=)
+#define    SHR_BITCLR(_a, _b)    _SHR_BITOP(_a, _b, &= ~)
+#define    SHR_BIT_ITER(_a, _max, _b)            \
+           for ((_b) = 0; (_b) < (_max); (_b)++) \
+               if ((_a)[(_b) / SHR_BITWID] == 0) \
+                   (_b) += (SHR_BITWID - 1);     \
+               else if (SHR_BITGET((_a), (_b)))
+
+
+/* clear _c bits starting from _b in bit array _a */
+extern void shr_bitop_range_clear(SHR_BITDCL *a, CONST int b, CONST int c);
+#define SHR_BITCLR_RANGE(_a, _b, _c)            \
+    (shr_bitop_range_clear(_a, _b, _c))
+
+/* set _c bits starting from _b in bit array _a */
+extern void shr_bitop_range_set(SHR_BITDCL *a, CONST int b, CONST int c);
+#define SHR_BITSET_RANGE(_a, _b, _c)            \
+    (shr_bitop_range_set(_a, _b, _c))
+
+/*
+ * Copy _e bits from bit array _c offset _d to bit array _a offset _b
+ * There should be no overlap between source _c and desstination _a
+ * _a[_b:_b + _e] = _c[_d:_d + _e]
+ */
+extern void shr_bitop_range_copy(SHR_BITDCL *a,
+                                 CONST int b,
+                                 CONST SHR_BITDCL *c,
+                                 CONST int d,
+                                 CONST int e);
+#define SHR_BITCOPY_RANGE(_a, _b, _c, _d, _e)   \
+    (shr_bitop_range_copy(_a, _b, _c, _d, _e))
+
+/* Result is 0 only if all bits in the range are 0 */
+#define SHR_BITTEST_RANGE(_bits, _first, _bit_count, _result) \
+    (_result) = !(shr_bitop_range_null(_bits, _first, _bit_count))
+
+extern void shr_bitop_range_and(CONST SHR_BITDCL *bits1,
+                                CONST SHR_BITDCL *bits2,
+                                CONST int first,
+                                CONST int bit_count,
+                                SHR_BITDCL *dest);
+extern void shr_bitop_range_or(CONST SHR_BITDCL *bits1,
+                               CONST SHR_BITDCL *bits2,
+                               CONST int first,
+                               CONST int bit_count,
+                               SHR_BITDCL *dest);
+extern void shr_bitop_range_xor(CONST SHR_BITDCL *bits1,
+                                CONST SHR_BITDCL *bits2,
+                                CONST int first,
+                                CONST int bit_count,
+                                SHR_BITDCL *dest);
+extern void shr_bitop_range_remove(CONST SHR_BITDCL *bits1,
+                                   CONST SHR_BITDCL *bits2,
+                                   CONST int first,
+                                   CONST int bit_count,
+                                   SHR_BITDCL *dest);
+
+#define SHR_BITAND_RANGE(_bits1, _bits2, _first, _bit_count, _dest) \
+    (shr_bitop_range_and(_bits1, _bits2, _first, _bit_count, _dest))
+
+#define SHR_BITOR_RANGE(_bits1, _bits2, _first, _bit_count, _dest) \
+    (shr_bitop_range_or(_bits1, _bits2, _first, _bit_count, _dest))
+
+#define SHR_BITXOR_RANGE(_bits1, _bits2, _first, _bit_count, _dest) \
+    (shr_bitop_range_xor(_bits1, _bits2, _first, _bit_count, _dest))
+
+#define SHR_BITREMOVE_RANGE(_bits1, _bits2, _first, _bit_count, _dest) \
+    (shr_bitop_range_remove(_bits1, _bits2, _first, _bit_count, _dest))
+
+extern void shr_bitop_range_negate(CONST SHR_BITDCL *bits1,
+                                   CONST int first,
+                                   CONST int bit_count,
+                                   SHR_BITDCL *dest);
+
+#define SHR_BITNEGATE_RANGE(_bits1, _first, _bit_count, _dest) \
+    (shr_bitop_range_negate(_bits1, _first, _bit_count, _dest))
+
+extern int shr_bitop_range_null(CONST SHR_BITDCL *a, CONST int first, CONST int bit_count);
+extern int shr_bitop_range_eq(CONST SHR_BITDCL *bits1, CONST SHR_BITDCL *bits2,
+                         CONST int first, CONST int range);
+extern void shr_bitop_range_count(CONST SHR_BITDCL *bits, CONST int first,
+                                 CONST int range, int *count);
+#define SHR_BITNULL_RANGE(_bits, _first, _range) \
+    (shr_bitop_range_null(_bits, _first, _range))
+#define SHR_BITEQ_RANGE(_bits1, _bits2, _first, _range) \
+    (shr_bitop_range_eq(_bits1, _bits2, _first, _range))
+#define SHR_BITCOUNT_RANGE(_bits, _count, _first, _range) \
+    shr_bitop_range_count(_bits, _first, _range, &(_count))
+
+#endif    /* !_SHR_BITOP_H */

ubuntu/opennsl/OpenNSL/include/shared/error.h

+/*********************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ **********************************************************************
+ * File:        error.h
+ * Details:     This file defines common error codes to be shared 
+ * 				between API layers.
+ *
+ * 				Its contents are not used directly by applications; 
+ * 				it is used only by header files of parent APIs which 
+ * 				need to define error codes.
+ *********************************************************************/
+
+#ifndef _SHR_ERROR_H
+#define _SHR_ERROR_H
+
+typedef enum {
+    _SHR_E_NONE                 = 0,
+    _SHR_E_INTERNAL             = -1,
+    _SHR_E_MEMORY               = -2,
+    _SHR_E_UNIT                 = -3,
+    _SHR_E_PARAM                = -4,
+    _SHR_E_EMPTY                = -5,
+    _SHR_E_FULL                 = -6,
+    _SHR_E_NOT_FOUND            = -7,
+    _SHR_E_EXISTS               = -8,
+    _SHR_E_TIMEOUT              = -9,
+    _SHR_E_BUSY                 = -10,
+    _SHR_E_FAIL                 = -11,
+    _SHR_E_DISABLED             = -12,
+    _SHR_E_BADID                = -13,
+    _SHR_E_RESOURCE             = -14,
+    _SHR_E_CONFIG               = -15,
+    _SHR_E_UNAVAIL              = -16,
+    _SHR_E_INIT                 = -17,
+    _SHR_E_PORT                 = -18,
+
+    _SHR_E_LIMIT                = -19           /* Must come last */
+} _shr_error_t;
+
+#define _SHR_ERRMSG_INIT        { \
+        "Ok",                           /* E_NONE */ \
+        "Internal error",               /* E_INTERNAL */ \
+        "Out of memory",                /* E_MEMORY */ \
+        "Invalid unit",                 /* E_UNIT */ \
+        "Invalid parameter",            /* E_PARAM */ \
+        "Table empty",                  /* E_EMPTY */ \
+        "Table full",                   /* E_FULL */ \
+        "Entry not found",              /* E_NOT_FOUND */ \
+        "Entry exists",                 /* E_EXISTS */ \
+        "Operation timed out",          /* E_TIMEOUT */ \
+        "Operation still running",      /* E_BUSY */ \
+        "Operation failed",             /* E_FAIL */ \
+        "Operation disabled",           /* E_DISABLED */ \
+        "Invalid identifier",           /* E_BADID */ \
+        "No resources for operation",   /* E_RESOURCE */ \
+        "Invalid configuration",        /* E_CONFIG */ \
+        "Feature unavailable",          /* E_UNAVAIL */ \
+        "Feature not initialized",      /* E_INIT */ \
+        "Invalid port",                 /* E_PORT */ \
+        "Unknown error"                 /* E_LIMIT */ \
+        }
+
+extern char *_shr_errmsg[];
+
+#define _SHR_ERRMSG(r)          \
+        _shr_errmsg[(((int)r) <= 0 && ((int)r) > _SHR_E_LIMIT) ? -(r) : -_SHR_E_LIMIT]
+
+#define _SHR_E_SUCCESS(rv)              ((rv) >= 0)
+#define _SHR_E_FAILURE(rv)              ((rv) < 0)
+
+#define _SHR_ERROR_TRACE(__errcode__)
+#define _SHR_RETURN(__expr__)  return (__expr__)
+
+#define _SHR_E_IF_ERROR_RETURN(op) \
+    do { int __rv__; if ((__rv__ = (op)) < 0) { _SHR_ERROR_TRACE(__rv__);  return(__rv__); } } while(0)
+#define _SHR_E_IF_ERROR_NOT_UNAVAIL_RETURN(op)                       \
+    do {                                                                \
+        int __rv__;                                                     \
+        if (((__rv__ = (op)) < 0) && (__rv__ != _SHR_E_UNAVAIL)) {      \
+            return(__rv__);                                             \
+        }                                                               \
+    } while(0)
+typedef enum {
+    _SHR_SWITCH_EVENT_IO_ERROR      = 1,
+    _SHR_SWITCH_EVENT_PARITY_ERROR  = 2,
+    _SHR_SWITCH_EVENT_THREAD_ERROR  = 3,
+    _SHR_SWITCH_EVENT_ACCESS_ERROR  = 4,
+    _SHR_SWITCH_EVENT_ASSERT_ERROR  = 5,
+    _SHR_SWITCH_EVENT_MODID_CHANGE  = 6,
+    _SHR_SWITCH_EVENT_DOS_ATTACK    = 7,
+    _SHR_SWITCH_EVENT_STABLE_FULL   = 8,
+    _SHR_SWITCH_EVENT_STABLE_ERROR   = 9,
+    _SHR_SWITCH_EVENT_UNCONTROLLED_SHUTDOWN = 10,
+    _SHR_SWITCH_EVENT_WARM_BOOT_DOWNGRADE = 11,
+    _SHR_SWITCH_EVENT_TUNE_ERROR = 12,
+    _SHR_SWITCH_EVENT_DEVICE_INTERRUPT  = 13,
+    _SHR_SWITCH_EVENT_ALARM = 14,
+    _SHR_SWITCH_EVENT_MMU_BST_TRIGGER = 15,
+    _SHR_SWITCH_EVENT_EPON_ALARM = 16,
+    _SHR_SWITCH_EVENT_RUNT_DETECT = 17,
+    _SHR_SWITCH_EVENT_COUNT             /* last, as always */
+} _shr_switch_event_t;
+
+#endif  /* !_SHR_ERROR_H */

ubuntu/opennsl/OpenNSL/include/shared/gport.h

+/*********************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ **********************************************************************
+ * File:        gport.h
+ * Details:     This file defines common error codes to be shared
+ *                              between API layers.
+ *
+ *             Its contents are not used directly by applications;
+ *             it is used only by header files of parent APIs which
+ *             need to define error codes.
+ *********************************************************************/
+
+#ifndef _SHR_GPORT_H
+#define _SHR_GPORT_H
+
+/*
+ * Defines:
+ *     _SHR_GPORT_*
+ * Purpose:
+ *     GPORT (Generic port) definitions. GPORT can be used to specify
+ *     a {module, port} pair, trunk, and other port types.
+ */
+
+#define _SHR_GPORT_NONE             (0)
+#define _SHR_GPORT_INVALID         (-1)
+#define _SHR_GPORT_TYPE_LOCAL               1  /* Port on local unit     */
+#define _SHR_GPORT_TYPE_MODPORT             2  /* Module ID and port     */
+#define _SHR_GPORT_TYPE_TRUNK               3  /* Trunk ID               */
+#define _SHR_GPORT_TYPE_LOCAL_CPU           5  /* CPU destination        */
+#define _SHR_GPORT_TYPE_UCAST_QUEUE_GROUP   9  /* Queue Group            */
+#define _SHR_GPORT_TYPE_MCAST              11  /* Multicast Set          */
+#define _SHR_GPORT_TYPE_MCAST_QUEUE_GROUP  12  /* Multicast Queue Group  */
+#define _SHR_GPORT_TYPE_SCHEDULER          13  /* Scheduler              */
+#define _SHR_GPORT_TYPE_CHILD              20  /* Child port             */
+#define _SHR_GPORT_TYPE_EGRESS_GROUP       21  /* Egress group port      */
+#define _SHR_GPORT_TYPE_EGRESS_CHILD       22  /* Egress child port      */
+#define _SHR_GPORT_TYPE_EGRESS_MODPORT     23  /* Egress Mod and port    */
+#define _SHR_GPORT_TYPE_UCAST_SUBSCRIBER_QUEUE_GROUP  24  /* Local Queue Group */
+#define _SHR_GPORT_TYPE_MCAST_SUBSCRIBER_QUEUE_GROUP  25  /* Local Multicast Queue Group  */
+#define _SHR_GPORT_TYPE_COSQ               30  /* cosq gport */
+#define _SHR_GPORT_TYPE_PROFILE            40
+#define _SHR_GPORT_TYPE_DESTMOD_QUEUE_GROUP      41 /* DMVOQ gport */
+
+#define _SHR_COSQ_GPORT_COMMON_CORE_BITS 3
+#define _SHR_COSQ_GPORT_COMMON_CORE_MASK ((1 << _SHR_COSQ_GPORT_COMMON_CORE_BITS) - 1)
+#define _SHR_COSQ_GPORT_COMMON_ALL_CORES_VALUE _SHR_COSQ_GPORT_COMMON_CORE_MASK
+
+#define _SHR_CORE_ALL -17
+#define _SHR_CORE_FIELD2ID(field) ((field) != _SHR_COSQ_GPORT_COMMON_ALL_CORES_VALUE ? field : _SHR_CORE_ALL)
+#define _SHR_CORE_ID2FIELD(id) ((id) != _SHR_CORE_ALL ? id : _SHR_COSQ_GPORT_COMMON_ALL_CORES_VALUE)
+
+#define _SHR_GPORT_TYPE_SHIFT                           26
+#define _SHR_GPORT_TYPE_MASK                            0x3f
+
+#define _SHR_GPORT_MODID_SHIFT                          11
+#define _SHR_GPORT_MODID_MASK                           0x7fff
+#define _SHR_GPORT_PORT_SHIFT                           0
+#define _SHR_GPORT_PORT_MASK                            0x7ff
+#define _SHR_GPORT_TRUNK_SHIFT                          0
+#define _SHR_GPORT_TRUNK_MASK                           0x3ffffff
+#define _SHR_GPORT_UCAST_QUEUE_GROUP_SHIFT              0
+#define _SHR_GPORT_UCAST_QUEUE_GROUP_MASK               0x3ffffff
+#define _SHR_GPORT_UCAST_QUEUE_GROUP_QID_SHIFT          0
+#define _SHR_GPORT_UCAST_QUEUE_GROUP_QID_MASK           0x3fff
+#define _SHR_GPORT_UCAST_QUEUE_GROUP_SYSPORTID_SHIFT    14
+#define _SHR_GPORT_UCAST_QUEUE_GROUP_SYSPORTID_MASK     0xfff
+#define _SHR_GPORT_SCHEDULER_SHIFT                      0
+#define _SHR_GPORT_SCHEDULER_MASK                       0x7fffff
+#define _SHR_GPORT_SCHEDULER_CORE_SHIFT                 23
+#define _SHR_GPORT_SCHEDULER_CORE_MASK                  _SHR_COSQ_GPORT_COMMON_CORE_MASK
+#define _SHR_GPORT_SCHEDULER_NODE_SHIFT                 0
+#define _SHR_GPORT_SCHEDULER_NODE_MASK                  0xfffff
+
+#define _SHR_GPORT_IS_MODPORT(_gport)    \
+        (((_gport) >> _SHR_GPORT_TYPE_SHIFT) == _SHR_GPORT_TYPE_MODPORT)
+
+#define _SHR_GPORT_MODPORT_SET(_gport, _module, _port)                       \
+        ((_gport) = (_SHR_GPORT_TYPE_MODPORT   << _SHR_GPORT_TYPE_SHIFT)   | \
+         (((_module) & _SHR_GPORT_MODID_MASK)  << _SHR_GPORT_MODID_SHIFT)  | \
+         (((_port) & _SHR_GPORT_PORT_MASK)     << _SHR_GPORT_PORT_SHIFT))
+
+#define _SHR_GPORT_MODPORT_MODID_GET(_gport)    \
+        (((_gport) >> _SHR_GPORT_MODID_SHIFT) & _SHR_GPORT_MODID_MASK)
+
+#define _SHR_GPORT_MODPORT_PORT_GET(_gport)     \
+        (((_gport) >> _SHR_GPORT_PORT_SHIFT) & _SHR_GPORT_PORT_MASK)
+
+#define _SHR_GPORT_IS_TRUNK(_gport)    \
+        (((_gport) >> _SHR_GPORT_TYPE_SHIFT) == _SHR_GPORT_TYPE_TRUNK)
+
+#define _SHR_GPORT_TRUNK_SET(_gport, _trunk_id)                              \
+        ((_gport) = (_SHR_GPORT_TYPE_TRUNK      << _SHR_GPORT_TYPE_SHIFT)  | \
+         (((_trunk_id) & _SHR_GPORT_TRUNK_MASK) << _SHR_GPORT_TRUNK_SHIFT))
+
+#define _SHR_GPORT_TRUNK_GET(_gport)   \
+        (((_gport) >> _SHR_GPORT_TRUNK_SHIFT) & _SHR_GPORT_TRUNK_MASK)
+
+#define _SHR_GPORT_IS_SCHEDULER(_gport)    \
+        (((_gport) >> _SHR_GPORT_TYPE_SHIFT) == _SHR_GPORT_TYPE_SCHEDULER)
+
+#define _SHR_GPORT_SCHEDULER_SET(_gport, _id)                            \
+         _SHR_GPORT_SCHEDULER_CORE_SET(_gport, _id, _SHR_CORE_ALL)
+
+#define _SHR_GPORT_SCHEDULER_GET(_gport)   \
+         (((_gport) >> _SHR_GPORT_SCHEDULER_SHIFT) & _SHR_GPORT_SCHEDULER_MASK)
+
+#define _SHR_GPORT_LOCAL_CPU        \
+        (_SHR_GPORT_TYPE_LOCAL_CPU << _SHR_GPORT_TYPE_SHIFT)
+
+#define _SHR_GPORT_IS_UCAST_QUEUE_GROUP(_gport)    \
+        (((_gport) >> _SHR_GPORT_TYPE_SHIFT) == _SHR_GPORT_TYPE_UCAST_QUEUE_GROUP)
+
+#define _SHR_GPORT_UCAST_QUEUE_GROUP_SET(_gport, _qid)                           \
+             _SHR_GPORT_UCAST_QUEUE_GROUP_SYSQID_SET(_gport,                      \
+             _SHR_GPORT_UCAST_QUEUE_GROUP_SYSPORTID_MASK, \
+              _qid)
+
+#define _SHR_GPORT_UCAST_QUEUE_GROUP_SYSQID_SET(_gport, _sysport_id, _qid)                       \
+        ((_gport) = (_SHR_GPORT_TYPE_UCAST_QUEUE_GROUP << _SHR_GPORT_TYPE_SHIFT)   | \
+         (((_sysport_id) & _SHR_GPORT_UCAST_QUEUE_GROUP_SYSPORTID_MASK)  << _SHR_GPORT_UCAST_QUEUE_GROUP_SYSPORTID_SHIFT)  | \
+         (((_qid) & _SHR_GPORT_UCAST_QUEUE_GROUP_QID_MASK)     << _SHR_GPORT_UCAST_QUEUE_GROUP_QID_SHIFT))
+
+#define _SHR_GPORT_IS_MCAST_QUEUE_GROUP(_gport) \
+        (((_gport) >> _SHR_GPORT_TYPE_SHIFT) == _SHR_GPORT_TYPE_MCAST_QUEUE_GROUP)
+
+#define _SHR_GPORT_IS_COSQ(_gport) \
+        (((_gport) >> _SHR_GPORT_TYPE_SHIFT) == _SHR_GPORT_TYPE_COSQ)
+
+#define  _SHR_GPORT_SCHEDULER_CORE_GET(_gport) \
+        _SHR_CORE_FIELD2ID((((_gport) >> _SHR_GPORT_SCHEDULER_CORE_SHIFT) & _SHR_GPORT_SCHEDULER_CORE_MASK))
+
+#define _SHR_GPORT_SCHEDULER_CORE_SET(_gport, _scheduler_id, _core_id)       \
+        ((_gport) = (_SHR_GPORT_TYPE_SCHEDULER << _SHR_GPORT_TYPE_SHIFT)  | \
+        (((_scheduler_id) & _SHR_GPORT_SCHEDULER_MASK) << _SHR_GPORT_SCHEDULER_SHIFT) | \
+        (((_SHR_CORE_ID2FIELD(_core_id)) & _SHR_GPORT_SCHEDULER_CORE_MASK) << _SHR_GPORT_SCHEDULER_CORE_SHIFT))
+
+#define _SHR_GPORT_SCHEDULER_NODE_SET(_gport, _level, _node)    \
+         ((_gport) = (_SHR_GPORT_TYPE_SCHEDULER << _SHR_GPORT_TYPE_SHIFT)  | \
+          (((_level) & _SHR_GPORT_SCHEDULER_LEVEL_MASK) << _SHR_GPORT_SCHEDULER_LEVEL_SHIFT) | \
+          (((_node) & _SHR_GPORT_SCHEDULER_NODE_MASK) << _SHR_GPORT_SCHEDULER_NODE_SHIFT))
+
+#define _SHR_GPORT_SCHEDULER_NODE_GET(_gport)   \
+         (((_gport) >> _SHR_GPORT_SCHEDULER_NODE_SHIFT) & _SHR_GPORT_SCHEDULER_NODE_MASK)
+
+#endif  /* !_SHR_GPORT_H */

ubuntu/opennsl/OpenNSL/include/shared/phyconfig.h

+/*********************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ **********************************************************************
+ * File:        phyconfig.h
+ * Details:     This file defines PHY configuration modes.
+ *
+ * 				Its contents are not used directly by applications; 
+ * 				it is used only by header files of parent APIs which
+ * 				need to define port modes.
+ *********************************************************************/
+
+#ifndef _SHR_PHYCONFIG_H
+#define _SHR_PHYCONFIG_H
+
+#include <shared/port.h>
+#include <shared/portmode.h>
+#include <shared/port_ability.h>
+
+/*
+ * Structure:
+ *	_shr_phy_config_t
+ * Purpose:
+ *	Defines the operating mode of a PHY.
+ */
+
+typedef struct _shr_phy_config_s {
+    int			enable;
+    int			preferred;
+    int			autoneg_enable;
+    _shr_port_mode_t	autoneg_advert;
+    _shr_port_ability_t advert_ability;
+    int			force_speed;
+    int			force_duplex;
+    int			master;
+    _shr_port_mdix_t    mdix;
+} _shr_phy_config_t;
+
+typedef int (*_shr_port_phy_reset_cb_t)(int unit, _shr_port_t port, 
+                                        void *user_data);
+
+typedef void (*_shr_port_medium_status_cb_t)(int unit, int port, 
+                                             _shr_port_medium_t medium,
+                                             void *user_arg);
+
+#endif	/* !_SHR_PHYCONFIG_H */

ubuntu/opennsl/OpenNSL/include/shared/phyreg.h

+/******************************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************
+ * File:        phyreg.h
+ * Details:     This file defines common PHY register definition.
+ *
+ *             Its contents are not used directly by applications;
+ *             it is used only by header files of parent APIs which
+ *             need to define PHY register definition.
+ ******************************************************************************/
+
+#ifndef _SHR_PHYREG_H
+#define _SHR_PHYREG_H
+
+#define _SHR_PORT_PHY_INTERNAL        0x00000001
+#define _SHR_PORT_PHY_NOMAP           0x00000002
+#define _SHR_PORT_PHY_CLAUSE45        0x00000004
+#define _SHR_PORT_PHY_I2C_DATA8       0x00000008
+#define _SHR_PORT_PHY_I2C_DATA16      0x00000010
+
+#define _SHR_PORT_PHY_CLAUSE45_ADDR(_devad, _regad)     \
+            ((((_devad) & 0x3F) << 16) |                \
+             ((_regad) & 0xFFFF))
+
+#endif  /* !_SHR_PHYREG_H */

ubuntu/opennsl/OpenNSL/include/shared/port.h

+/*********************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ********************************************************************
+ * File:        port.h
+ * Details:     This file defines common network port parameters.
+ *
+ * 				Its contents are not used directly by applications;
+ * 				it is used only by header files of parent APIs 
+ * 				which need to define port parameters.
+ * *******************************************************************/
+
+#ifndef _SHR_PORT_H
+#define _SHR_PORT_H
+
+/*
+ * Typedef:
+ *    _shr_port_t
+ * Purpose:
+ *    Port number type for shared definitions
+ */
+#include <sal/types.h>
+
+typedef int _shr_port_t;
+
+/*
+ * Defines:
+ *	_SHR_PORT_DUPLEX_*
+ * Purpose:
+ *	Defines duplexity of a port
+ */
+
+typedef enum _shr_port_duplex_e {
+    _SHR_PORT_DUPLEX_HALF,
+    _SHR_PORT_DUPLEX_FULL,
+    _SHR_PORT_DUPLEX_COUNT	/* last, please */
+} _shr_port_duplex_t;
+
+/*
+ * Defines:
+ *  _SHR_PORT_IF_*
+ * Purpose:
+ *  Defines interface type between MAC and PHY.
+ */
+
+typedef enum _shr_port_if_e {
+    _SHR_PORT_IF_NOCXN, /* No physical connection */
+    _SHR_PORT_IF_NULL,  /* Pass-through connection without PHY */
+    _SHR_PORT_IF_MII,
+    _SHR_PORT_IF_GMII,
+    _SHR_PORT_IF_SGMII,
+    _SHR_PORT_IF_TBI,
+    _SHR_PORT_IF_XGMII,
+    _SHR_PORT_IF_RGMII,
+    _SHR_PORT_IF_RvMII,
+    _SHR_PORT_IF_SFI,
+    _SHR_PORT_IF_XFI,
+    _SHR_PORT_IF_KR,
+    _SHR_PORT_IF_KR4,
+    _SHR_PORT_IF_CR,
+    _SHR_PORT_IF_CR4,
+    _SHR_PORT_IF_XLAUI,
+    _SHR_PORT_IF_SR,
+    _SHR_PORT_IF_RXAUI,
+    _SHR_PORT_IF_XAUI,
+    _SHR_PORT_IF_SPAUI,
+    _SHR_PORT_IF_QSGMII,
+    _SHR_PORT_IF_ILKN,
+    _SHR_PORT_IF_RCY,
+    _SHR_PORT_IF_FAT_PIPE,
+    _SHR_PORT_IF_CGMII,
+    _SHR_PORT_IF_CAUI,
+    _SHR_PORT_IF_LR,
+    _SHR_PORT_IF_LR4,
+    _SHR_PORT_IF_SR4,
+    _SHR_PORT_IF_KX,
+    _SHR_PORT_IF_ZR,
+    _SHR_PORT_IF_SR10,
+    _SHR_PORT_IF_OTL,
+    _SHR_PORT_IF_CPU,
+    _SHR_PORT_IF_OLP,
+    _SHR_PORT_IF_OAMP,
+    _SHR_PORT_IF_ERP,
+    _SHR_PORT_IF_TM_INTERNAL_PKT,   
+    _SHR_PORT_IF_SR2,
+    _SHR_PORT_IF_KR2,
+    _SHR_PORT_IF_CR2,
+    _SHR_PORT_IF_XFI2,
+    _SHR_PORT_IF_XLAUI2,
+    _SHR_PORT_IF_CR10,
+    _SHR_PORT_IF_KR10,
+    _SHR_PORT_IF_LR10,
+    _SHR_PORT_IF_ER,
+    _SHR_PORT_IF_ER2,
+    _SHR_PORT_IF_ER4,
+    _SHR_PORT_IF_CX,
+    _SHR_PORT_IF_CX2,
+    _SHR_PORT_IF_CX4,
+    _SHR_PORT_IF_CAUI_C2C,
+    _SHR_PORT_IF_CAUI_C2M,
+    _SHR_PORT_IF_VSR,
+    _SHR_PORT_IF_LR2,
+    _SHR_PORT_IF_LRM,
+    _SHR_PORT_IF_XLPPI,
+    _SHR_PORT_IF_COUNT /* last, please */
+} _shr_port_if_t;
+
+/*
+ * Defines:
+ *  _SHR_PORT_STP_*
+ * Purpose:
+ *  Defines the spanning tree states of a port.
+ */
+
+typedef enum _shr_port_stp_e {
+    _SHR_PORT_STP_DISABLE   = 0,
+    _SHR_PORT_STP_BLOCK     = 1,
+    _SHR_PORT_STP_LISTEN    = 2,
+    _SHR_PORT_STP_LEARN     = 3,
+    _SHR_PORT_STP_FORWARD   = 4,
+    _SHR_PORT_STP_COUNT = 5   /* last, please */
+} _shr_port_stp_t;
+
+/*
+ * Defines:
+ *      _SHR_PORT_MDIX_*
+ * Purpose:
+ *      Defines the MDI crossover (MDIX) modes for the port
+ */
+typedef enum _shr_port_mdix_e {
+    _SHR_PORT_MDIX_AUTO,
+    _SHR_PORT_MDIX_FORCE_AUTO,
+    _SHR_PORT_MDIX_NORMAL,
+    _SHR_PORT_MDIX_XOVER,
+    _SHR_PORT_MDIX_COUNT    /* last, please */
+} _shr_port_mdix_t;
+
+/*
+ * Defines:
+ *      _SHR_PORT_MDIX_STATUS_*
+ * Purpose:
+ *      Defines the MDI crossover state
+ */
+typedef enum _shr_port_mdix_status_e {
+    _SHR_PORT_MDIX_STATUS_NORMAL,
+    _SHR_PORT_MDIX_STATUS_XOVER,
+    _SHR_PORT_MDIX_STATUS_COUNT       /* last, please */
+} _shr_port_mdix_status_t;
+
+/*
+ * Defines:
+ *      _SHR_PORT_MEDIUM_*
+ * Purpose:
+ *      Supported physical mediums
+ */
+typedef enum _shr_port_medium_e {
+    _SHR_PORT_MEDIUM_NONE              = 0,
+    _SHR_PORT_MEDIUM_COPPER            = 1,
+    _SHR_PORT_MEDIUM_FIBER             = 2,
+    _SHR_PORT_MEDIUM_COUNT             /* last, please */
+} _shr_port_medium_t;
+
+#endif	/* !_SHR_PORT_H */

ubuntu/opennsl/OpenNSL/include/shared/portmode.h

+/*********************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *********************************************************************
+ * File:        portmode.h
+ * Details:     This file defines common network port modes.
+ *
+ * 				Its contents are not used directly by applications;
+ * 				it is used only by header files of parent APIs which
+ * 				need to define port modes.
+ ********************************************************************/
+
+#ifndef _SHR_PORTMODE_H
+#define _SHR_PORTMODE_H
+
+typedef unsigned int _shr_port_mode_t;
+
+/*
+ * Defines:
+ *      _SHR_PM_*
+ * Purpose:
+ *      Defines for port modes.
+ */
+
+#define _SHR_PM_10MB_HD         (1 << 0)
+#define _SHR_PM_10MB_FD         (1 << 1)
+#define _SHR_PM_100MB_HD        (1 << 2)
+#define _SHR_PM_100MB_FD        (1 << 3)
+#define _SHR_PM_1000MB_HD       (1 << 4)
+#define _SHR_PM_1000MB_FD       (1 << 5)
+#define _SHR_PM_2500MB_HD       (1 << 6)
+#define _SHR_PM_2500MB_FD       (1 << 7)
+#define _SHR_PM_10GB_HD         (1 << 8)
+#define _SHR_PM_10GB_FD         (1 << 9)
+#define _SHR_PM_PAUSE_TX        (1 << 10)       /* TX pause capable */
+#define _SHR_PM_PAUSE_RX        (1 << 11)       /* RX pause capable */
+#define _SHR_PM_PAUSE_ASYMM     (1 << 12)       /* Asymm pause capable (R/O) */
+#define _SHR_PM_TBI             (1 << 13)       /* TBI mode supported */
+#define _SHR_PM_MII             (1 << 14)       /* MII mode supported */
+#define _SHR_PM_GMII            (1 << 15)       /* GMII mode supported */
+#define _SHR_PM_SGMII           (1 << 16)       /* SGMII mode supported */
+#define _SHR_PM_XGMII           (1 << 17)       /* XGMII mode supported */
+#define _SHR_PM_LB_MAC          (1 << 18)       /* MAC loopback supported */
+#define _SHR_PM_LB_NONE         (1 << 19)       /* Useful for automated test */
+#define _SHR_PM_LB_PHY          (1 << 20)       /* PHY loopback supported */
+#define _SHR_PM_AN              (1 << 21)       /* Auto-negotiation */
+#define _SHR_PM_3000MB_HD       (1 << 29)
+#define _SHR_PM_3000MB_FD       (1 << 30)
+#define _SHR_PM_12GB_HD         (1 << 22)
+#define _SHR_PM_12GB_FD         (1 << 23)
+#define _SHR_PM_13GB_HD         (1 << 24)
+#define _SHR_PM_13GB_FD         (1 << 25) 
+#define _SHR_PM_16GB_HD         (1 << 26)
+#define _SHR_PM_16GB_FD         (1 << 27)
+#define _SHR_PM_COMBO           (1 << 31)      /* COMBO ports support both
+                                                * copper and fiber interfaces */
+
+#define _SHR_PM_PAUSE           (_SHR_PM_PAUSE_TX  | _SHR_PM_PAUSE_RX)
+#define _SHR_PM_10MB            (_SHR_PM_10MB_HD   | _SHR_PM_10MB_FD)
+#define _SHR_PM_100MB           (_SHR_PM_100MB_HD  | _SHR_PM_100MB_FD)
+#define _SHR_PM_1000MB          (_SHR_PM_1000MB_HD | _SHR_PM_1000MB_FD)
+#define _SHR_PM_2500MB          (_SHR_PM_2500MB_HD | _SHR_PM_2500MB_FD)
+#define _SHR_PM_3000MB          (_SHR_PM_3000MB_HD | _SHR_PM_3000MB_FD)
+#define _SHR_PM_10GB            (_SHR_PM_10GB_HD   | _SHR_PM_10GB_FD)
+#define _SHR_PM_12GB            (_SHR_PM_12GB_HD   | _SHR_PM_12GB_FD)
+#define _SHR_PM_13GB            (_SHR_PM_13GB_HD   | _SHR_PM_13GB_FD)
+#define _SHR_PM_16GB            (_SHR_PM_16GB_HD   | _SHR_PM_16GB_FD)
+
+#define _SHR_PM_SPEED_ALL       (_SHR_PM_16GB |         \
+                                 _SHR_PM_13GB |         \
+                                 _SHR_PM_12GB |         \
+                                 _SHR_PM_10GB |         \
+                                 _SHR_PM_3000MB |       \
+                                 _SHR_PM_2500MB |       \
+                                 _SHR_PM_1000MB |       \
+                                 _SHR_PM_100MB |        \
+                                 _SHR_PM_10MB)
+
+#define _SHR_PM_SPEED_MAX(m)    (((m) & _SHR_PM_16GB)   ? 16000 : \
+                                 ((m) & _SHR_PM_13GB)   ? 13000 : \
+                                 ((m) & _SHR_PM_12GB)   ? 12000 : \
+                                 ((m) & _SHR_PM_10GB)   ? 10000 : \
+                                 ((m) & _SHR_PM_3000MB) ? 3000 : \
+                                 ((m) & _SHR_PM_2500MB) ? 2500 : \
+                                 ((m) & _SHR_PM_1000MB) ? 1000 : \
+                                 ((m) & _SHR_PM_100MB)  ? 100 : \
+                                 ((m) & _SHR_PM_10MB)   ? 10 : 0)
+
+#define _SHR_PM_SPEED(s)        ((16000 == (s)) ? _SHR_PM_16GB : \
+                                 (13000 == (s)) ? _SHR_PM_13GB : \
+                                 (12000 == (s)) ? _SHR_PM_12GB : \
+                                 (10000 == (s)) ? _SHR_PM_10GB : \
+                                 (3000  == (s)) ? _SHR_PM_3000MB : \
+                                 (2500  == (s)) ? _SHR_PM_2500MB : \
+                                 (1000  == (s)) ? _SHR_PM_1000MB : \
+                                 (100   == (s)) ? _SHR_PM_100MB : \
+                                 (10    == (s)) ? _SHR_PM_10MB : 0)
+
+#define _SHR_PM_FD              (_SHR_PM_16GB_FD |    \
+                                 _SHR_PM_13GB_FD |    \
+                                 _SHR_PM_12GB_FD |    \
+                                 _SHR_PM_10GB_FD |    \
+                                 _SHR_PM_3000MB_FD |    \
+                                 _SHR_PM_2500MB_FD |    \
+                                 _SHR_PM_1000MB_FD |    \
+                                 _SHR_PM_100MB_FD |     \
+                                 _SHR_PM_10MB_FD)
+
+#define _SHR_PM_HD              (_SHR_PM_16GB_HD |    \
+                                 _SHR_PM_13GB_HD |    \
+                                 _SHR_PM_12GB_HD |    \
+                                 _SHR_PM_10GB_HD |    \
+                                 _SHR_PM_3000MB_HD |    \
+                                 _SHR_PM_2500MB_HD |    \
+                                 _SHR_PM_1000MB_HD |    \
+                                 _SHR_PM_100MB_HD |     \
+                                 _SHR_PM_10MB_HD)
+#endif  /* !_SHR_PORTMODE_H */

ubuntu/opennsl/OpenNSL/include/shared/switch.h

+/*********************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *********************************************************************
+ * File:        switch.h
+ ********************************************************************/
+
+
+#ifndef _SHR_SWITCH_H
+#define _SHR_SWITCH_H
+
+#define _SHR_SWITCH_MAX_PIPES                 4  /* Max number of pipes (or slices) */
+
+#define _SHR_SWITCH_STABLE_NONE               0  /* No storage */
+#define _SHR_SWITCH_STABLE_DEVICE_NEXT_HOP    1  /* Use next hop table */
+#define _SHR_SWITCH_STABLE_DEVICE_EXT_MEM     2  /* Use external TCAM/SRAM */
+#define _SHR_SWITCH_STABLE_APPLICATION        3  /* Use application storage */
+
+#endif  /* !_SHR_SWITCH_H */

ubuntu/opennsl/OpenNSL/include/shared/types.h

+/*********************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ **********************************************************************
+ * File:        types.h
+ * Details:     Shared data types
+ *********************************************************************/
+#ifndef   _SHR_TYPES_H_
+#define   _SHR_TYPES_H_
+
+typedef int8 _shr_dma_chan_t;
+
+typedef enum  {
+  _SHR_COLOR_GREEN = 0,
+  _SHR_COLOR_YELLOW = 1,
+  _SHR_COLOR_RED = 2,
+  _SHR_COLOR_BLACK = 3,
+  _SHR_COLOR_PRESERVE = 4,
+  _SHR_COLOR_COUNT = 5
+} _shr_color_t;
+
+typedef enum  {
+  _SHR_FORWARDING_TYPE_L2 = 0,            /* L2 switching forwarding. */
+  _SHR_FORWARDING_TYPE_IP4UCAST = 1,      /* IPv4 Unicast Routing forwarding. */
+  _SHR_FORWARDING_TYPE_IP4MCAST = 2,      /* IPv4 Multicast Routing forwarding. */
+  _SHR_FORWARDING_TYPE_IP6UCAST = 3,      /* IPv6 Unicast Routing forwarding. */
+  _SHR_FORWARDING_TYPE_IP6MCAST = 4,      /* IPv6 Multicast Routing forwarding. */
+  _SHR_FORWARDING_TYPE_MPLS = 5,          /* MPLS Switching forwarding. */
+  _SHR_FORWARDING_TYPE_TRILL = 6,         /* Trill forwarding. */
+  _SHR_FORWARDING_TYPE_RXREASON = 7,      /* Forwarding according to a RxReason. */
+  _SHR_FORWARDING_TYPE_TRAFFIC_MANAGMENT = 8, /* Traffic Management forwarding, when
+                                                 an external Packet Processor sets the
+                                                 forwarding decision. */
+  _SHR_FORWARDING_TYPE_SNOOP = 9,         /* Snooped packet. */
+  _SHR_FORWARDING_TYPE_FCoE = 10,         /* Fiber Channel over Ethernet
+                                             forwarding. */
+  _SHR_FORWARDING_TYPE_COUNT = 11         /* Always Last. Not a usable value. */
+} _shr_forwarding_type_t;
+
+#endif /* _SHR_TYPES_H_ */

ubuntu/opennsl/OpenNSL/include/shared/util.h

+/******************************************************************************
+ *
+ * (C) Copyright Broadcom Corporation 2013-2016
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************
+ * File:        util.h
+ * Details:     This file defines general utility routines.
+ *
+ *             Its contents are not used directly by applications;
+ *             it is used only by header files of parent APIs which
+ *             need to access these routines.
+ ******************************************************************************/
+
+#ifndef _SHR_UTIL_H
+#define _SHR_UTIL_H
+
+#include <sal/types.h>
+
+extern int _shr_popcount(unsigned int);
+
+#endif	/* !_SHR_UTIL_H */

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/include/ibde.h

+/*
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to
+ * you under the terms of the GNU General Public License version 2 (the
+ * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+ * with the following added to such license:
+ * 
+ * As a special exception, the copyright holders of this software give
+ * you permission to link this software with independent modules, and to
+ * copy and distribute the resulting executable under terms of your
+ * choice, provided that you also meet, for each linked independent
+ * module, the terms and conditions of the license of that module.  An
+ * independent module is a module which is not derived from this
+ * software.  The special exception does not apply to any modifications
+ * of the software.
+ */
+/*
+ * $Id: ibde.h,v 1.27 2012/11/02 23:10:59 bpeela Exp $
+ * $Copyright: (c) 2005 Broadcom Corp.
+ * All Rights Reserved.$
+ */
+
+#ifndef __IBDE_H__
+#define __IBDE_H__
+
+#include <sal/types.h>
+
+/*
+ * Represents a collection of devices 
+ */
+
+typedef struct ibde_dev_s {
+    uint16 device;
+    uint8  rev;
+    sal_vaddr_t base_address;
+    sal_vaddr_t base_address1;
+    sal_vaddr_t base_address2;
+} ibde_dev_t;
+
+
+typedef struct ibde_s {
+
+    const char *(*name)(void);
+  
+    /* Returns the number of devices available */
+    /* Each device is is accessed through a handle */
+    /* Handles are assumed to index the array of devices */
+  
+    /* Support SWITCH or ETHERNET or CPU devices */
+    int     (*num_devices)(int type);
+#define BDE_ALL_DEVICES         0
+#define BDE_SWITCH_DEVICES      1
+#define BDE_ETHER_DEVICES       2
+#define BDE_CPU_DEVICES         3
+
+    const   ibde_dev_t *(*get_dev)(int d);
+
+    /* 
+     * Get types of underlaying devices.
+     * A combination of bus type and functional type is returned.
+     * In case of bus type, support PCI and SPI device types.
+     * In case of functional type, specify if underlaying device is
+     * a switching or ethernet device.
+     */
+    uint32  (*get_dev_type)(int d);
+#define BDE_PCI_DEV_TYPE      SAL_PCI_DEV_TYPE    /* PCI device */
+#define BDE_SPI_DEV_TYPE      SAL_SPI_DEV_TYPE    /* SPI device */
+#define BDE_EB_DEV_TYPE       SAL_EB_DEV_TYPE     /* EB device */
+#define BDE_ICS_DEV_TYPE      SAL_ICS_DEV_TYPE    /* ICS device */
+#define BDE_MII_DEV_TYPE      SAL_MII_DEV_TYPE    /* MII device */
+#define BDE_I2C_DEV_TYPE      SAL_I2C_DEV_TYPE    /* I2C device */
+#define BDE_AXI_DEV_TYPE      SAL_AXI_DEV_TYPE    /* AXI device */
+#define BDE_EMMI_DEV_TYPE     SAL_EMMI_DEV_TYPE   /* EMMI device */
+#define BDE_DEV_BUS_ALT       SAL_DEV_BUS_ALT     /* Alternate Access */
+#define BDE_DEV_BUS_MSI       SAL_DEV_BUS_MSI     /* Message-signaled interrupts */
+
+#define BDE_DEV_BUS_TYPE_MASK SAL_DEV_BUS_TYPE_MASK
+    
+#define BDE_SWITCH_DEV_TYPE   SAL_SWITCH_DEV_TYPE /* Switch device */
+#define BDE_ETHER_DEV_TYPE    SAL_ETHER_DEV_TYPE  /* Ethernet device */
+#define BDE_CPU_DEV_TYPE      SAL_CPU_DEV_TYPE    /* CPU device */
+
+#define BDE_BYTE_SWAP         0x01000000          /* SW byte swap */
+
+#define BDE_256K_REG_SPACE    0x20000000          /* Map 256K (v 64K) */
+#define BDE_128K_REG_SPACE    0x40000000          /* Map 128K (v 64K) */
+#define BDE_320K_REG_SPACE    0x80000000          /* Map 256K+64K */
+
+/* Bus supports only 16bit reads */
+#define BDE_DEV_BUS_RD_16BIT  SAL_DEV_BUS_RD_16BIT 
+
+/* Bus supports only 16bit writes */
+#define BDE_DEV_BUS_WR_16BIT  SAL_DEV_BUS_WR_16BIT
+
+/* Backward compatibility */
+#define BDE_ET_DEV_TYPE       BDE_MII_DEV_TYPE
+
+#define BDE_DEV_MEM_MAPPED(_d) \
+    ((_d) & (BDE_PCI_DEV_TYPE | BDE_ICS_DEV_TYPE | BDE_EB_DEV_TYPE |\
+             BDE_EMMI_DEV_TYPE | BDE_AXI_DEV_TYPE))
+
+    /* 
+     * PCI Bus Access
+     */
+    uint32  (*pci_conf_read)(int d, uint32 addr);
+    int     (*pci_conf_write)(int d, uint32 addr, uint32 data);
+    void    (*pci_bus_features)(int d, int *be_pio, int *be_packet,
+                                int *be_other);
+
+    uint32  (*read)(int d, uint32 addr);
+    int     (*write)(int d, uint32 addr, uint32 data);
+
+    uint32* (*salloc)(int d, int size, const char *name);
+    void    (*sfree)(int d, void *ptr);
+    int     (*sflush)(int d, void *addr, int length);
+    int     (*sinval)(int d, void *addr, int length);
+
+    int     (*interrupt_connect)(int d, void (*)(void*), void *data);  
+    int     (*interrupt_disconnect)(int d);
+
+    sal_paddr_t  (*l2p)(int d, void *laddr);
+    uint32 *(*p2l)(int d, sal_paddr_t paddr);
+
+    /* 
+     * SPI Access via SMP
+     */
+    int  (*spi_read)(int d, uint32 addr, uint8 *buf, int len);
+    int  (*spi_write)(int d, uint32 addr, uint8 *buf, int len);
+    /* Special SPI access addresses */
+#define BDE_DEV_OP_EMMI_INIT    SAL_DEV_OP_EMMI_INIT
+
+    /* 
+     * iProc register access
+     */
+    uint32  (*iproc_read)(int d, uint32 addr);
+    int     (*iproc_write)(int d, uint32 addr, uint32 data);
+
+    /* 
+     * Shared memory access
+     */
+    uint32  (*shmem_read)(int dev, uint32 addr, uint8 *buf, uint32 len);
+    void    (*shmem_write)(int dev, uint32 addr, uint8 *buf, uint32 len);
+    sal_vaddr_t (*shmem_map)(int dev, uint32 addr, uint32 size);
+
+} ibde_t;
+
+
+/* System BDE */
+extern ibde_t *bde;
+
+
+#endif /* __IBDE_H__ */

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/include/sal/core/sync.h

+/*
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to
+ * you under the terms of the GNU General Public License version 2 (the
+ * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+ * with the following added to such license:
+ * 
+ * As a special exception, the copyright holders of this software give
+ * you permission to link this software with independent modules, and to
+ * copy and distribute the resulting executable under terms of your
+ * choice, provided that you also meet, for each linked independent
+ * module, the terms and conditions of the license of that module.  An
+ * independent module is a module which is not derived from this
+ * software.  The special exception does not apply to any modifications
+ * of the software.
+ */
+/*
+ * $Id: sync.h,v 1.1 2005/06/25 22:26:59 mlarsen Exp $
+ * $Copyright: (c) 2005 Broadcom Corp.
+ * All Rights Reserved.$
+ */
+
+#ifndef _SAL_SYNC_H
+#define _SAL_SYNC_H
+
+typedef struct sal_sem_s{
+    char sal_opaque_type;
+} *sal_sem_t;
+
+#define sal_sem_FOREVER		(-1)
+#define sal_sem_BINARY		1
+#define sal_sem_COUNTING	0
+
+sal_sem_t	sal_sem_create(char *desc, int binary, int initial_count);
+void		sal_sem_destroy(sal_sem_t b);
+int		sal_sem_take(sal_sem_t b, int usec);
+int		sal_sem_give(sal_sem_t b);
+
+#endif	/* !_SAL_SYNC_H */

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/include/sal/core/thread.h

+/*
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to
+ * you under the terms of the GNU General Public License version 2 (the
+ * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+ * with the following added to such license:
+ * 
+ * As a special exception, the copyright holders of this software give
+ * you permission to link this software with independent modules, and to
+ * copy and distribute the resulting executable under terms of your
+ * choice, provided that you also meet, for each linked independent
+ * module, the terms and conditions of the license of that module.  An
+ * independent module is a module which is not derived from this
+ * software.  The special exception does not apply to any modifications
+ * of the software.
+ */
+/*
+ * $Id: thread.h,v 1.1 2005/06/25 22:26:59 mlarsen Exp $
+ * $Copyright: (c) 2005 Broadcom Corp.
+ * All Rights Reserved.$
+ */
+
+#ifndef _SAL_THREAD_H
+#define _SAL_THREAD_H
+
+#include <sal/types.h>
+
+void		sal_usleep(uint32 usec);
+void		sal_udelay(uint32 usec);
+
+#endif	/* !_SAL_THREAD_H */

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/include/sal/types.h

+/*
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to
+ * you under the terms of the GNU General Public License version 2 (the
+ * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+ * with the following added to such license:
+ * 
+ * As a special exception, the copyright holders of this software give
+ * you permission to link this software with independent modules, and to
+ * copy and distribute the resulting executable under terms of your
+ * choice, provided that you also meet, for each linked independent
+ * module, the terms and conditions of the license of that module.  An
+ * independent module is a module which is not derived from this
+ * software.  The special exception does not apply to any modifications
+ * of the software.
+ */
+/*
+ * $Id: types.h,v 1.3 2013/04/06 06:19:14 mlarsen Exp $
+ * $Copyright: (c) 2005 Broadcom Corp.
+ * All Rights Reserved.$
+ *
+ * File: 	types.h
+ * Purpose: 	SAL type definitions
+ */
+
+#ifndef _SAL_TYPES_H
+#define _SAL_TYPES_H
+
+/*
+ * Define platform-independent types
+ */
+
+#ifndef TRUE
+#define TRUE			1
+#endif
+
+#ifndef FALSE
+#define FALSE			0
+#endif
+
+#ifndef NULL
+#define NULL			0
+#endif
+
+#ifndef DONT_CARE
+#define DONT_CARE		0
+#endif
+
+#define VOL			volatile
+
+/*
+ * 64-bit type
+ */
+
+#ifdef LONGS_ARE_64BITS
+
+#define COMPILER_64BIT
+#define	COMPILER_UINT64			unsigned long
+#define u64_H(v)			(((uint32 *) &(v))[u64_MSW])
+#define u64_L(v)			(((uint32 *) &(v))[u64_LSW])
+
+#else /* !LONGS_ARE_64BITS */
+
+#define COMPILER_64BIT
+#define	COMPILER_UINT64			unsigned long long
+#define u64_H(v)			(((uint32 *) &(v))[u64_MSW])
+#define u64_L(v)			(((uint32 *) &(v))[u64_LSW])
+
+#endif /* LONGS_ARE_64BITS */
+
+/*
+ * Define unsigned and signed integers with guaranteed sizes.
+ * Adjust if your compiler uses different sizes for short or int.
+ */
+
+typedef unsigned char		uint8;		/* 8-bit quantity  */
+typedef unsigned short		uint16;		/* 16-bit quantity */
+typedef unsigned int		uint32;		/* 32-bit quantity */
+typedef COMPILER_UINT64		uint64;		/* 64-bit quantity */
+
+typedef signed char		int8;		/* 8-bit quantity  */
+typedef signed short		int16;		/* 16-bit quantity */
+typedef signed int		int32;		/* 32-bit quantity */
+
+#define BITS2BYTES(x)		(((x) + 7) / 8)
+#define BITS2WORDS(x)		(((x) + 31) / 32)
+
+#define BYTES2BITS(x)		((x) * 8)
+#define BYTES2WORDS(x)		(((x) + 3) / 4)
+
+#define WORDS2BITS(x)		((x) * 32)
+#define WORDS2BYTES(x)		((x) * 4)
+
+#define COUNTOF(ary)		((int) (sizeof (ary) / sizeof ((ary)[0])))
+
+typedef uint32	sal_paddr_t;		/* Physical address (PCI address) */
+
+#ifdef PTRS_ARE_64BITS
+typedef uint64	sal_vaddr_t;		/* Virtual address (Host address) */
+#define PTR_TO_INT(x)		((uint32)(((sal_vaddr_t)(x))&0xFFFFFFFF))
+#else
+typedef uint32	sal_vaddr_t;		/* Virtual address (Host address) */
+#define PTR_TO_INT(x)		((uint32)(x))
+#endif
+
+#define INT_TO_PTR(x)		((void *)((sal_vaddr_t)(x)))
+
+#define PTR_TO_UINTPTR(x)       ((sal_vaddr_t)(x))
+#define UINTPTR_TO_PTR(x)       ((void *)(x))
+
+typedef union
+{
+	uint8			u8;
+	uint16			u16;
+	uint32			u32;
+	uint64			u64;
+	sal_paddr_t		paddr;
+	sal_vaddr_t		vaddr;
+	void			*ptr;
+}				any_t;
+
+/* Device bus types */
+#define SAL_PCI_DEV_TYPE        0x00001 /* PCI device */
+#define SAL_SPI_DEV_TYPE        0x00002 /* SPI device */
+#define SAL_EB_DEV_TYPE         0x00004 /* EB device */
+#define SAL_ICS_DEV_TYPE        0x00008 /* ICS device */
+#define SAL_MII_DEV_TYPE        0x00010 /* MII device */
+#define SAL_RCPU_DEV_TYPE       0x00020 /* RCPU device */
+#define SAL_I2C_DEV_TYPE        0x00040 /* I2C device */
+#define SAL_AXI_DEV_TYPE        0x00080 /* AXI device */
+#define SAL_EMMI_DEV_TYPE       0x10000 /* EMMI device */
+#define SAL_DEV_BUS_TYPE_MASK   0xf00ff /* Odd for historical reasons */
+
+/* Device types */
+#define SAL_SWITCH_DEV_TYPE     0x00100 /* Switch device */
+#define SAL_ETHER_DEV_TYPE      0x00200 /* Ethernet device */
+#define SAL_CPU_DEV_TYPE        0x00400 /* CPU device */
+#define SAL_DEV_TYPE_MASK       0x00f00
+
+/* Access types */
+#define SAL_DEV_BUS_RD_16BIT    0x01000 /* 16 bit reads on bus */
+#define SAL_DEV_BUS_WR_16BIT    0x02000 /* 16 bit writes on bus */
+#define SAL_DEV_BUS_ALT         0x04000 /* Alternate access */
+#define SAL_DEV_BUS_MSI         0x08000 /* Message-signaled interrupts */
+#define SAL_DEV_FLAG_MASK       0x0f000
+
+/* BDE reserved mask (cannot be used by SAL) */
+#define SAL_DEV_BDE_MASK        0xff000000
+
+/* Backward compatibility */
+#define SAL_ET_DEV_TYPE         SAL_MII_DEV_TYPE
+
+/* Special access addresses */
+#define SAL_DEV_OP_EMMI_INIT    0x0fff1000
+
+#endif	/* !_SAL_TYPES_H */

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/include/sdk_config.h

+/*
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to
+ * you under the terms of the GNU General Public License version 2 (the
+ * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+ * with the following added to such license:
+ * 
+ * As a special exception, the copyright holders of this software give
+ * you permission to link this software with independent modules, and to
+ * copy and distribute the resulting executable under terms of your
+ * choice, provided that you also meet, for each linked independent
+ * module, the terms and conditions of the license of that module.  An
+ * independent module is a module which is not derived from this
+ * software.  The special exception does not apply to any modifications
+ * of the software.
+ */
+/*
+ * $Id: sdk_config.h,v 1.5 2012/03/02 15:13:56 yaronm Exp $
+ * $Copyright: (c) 2006 Broadcom Corp.
+ * All Rights Reserved.$
+ *
+ *
+ */
+
+#ifndef __SDK_CONFIG_H__
+#define __SDK_CONFIG_H__
+
+/*
+ * Include custom overrides
+ */
+#ifdef SDK_INCLUDE_CUSTOM_CONFIG
+#include <sdk_custom_config.h>
+#endif
+
+
+/*
+ * Memory Barrier operation if required. 
+ * Defaults to nothing. 
+ */
+#ifndef SDK_CONFIG_MEMORY_BARRIER
+#define SDK_CONFIG_MEMORY_BARRIER
+#endif
+
+
+
+#endif /* __SDK_CONFIG_H__ */

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/include/soc/cmic.h

+/*
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to
+ * you under the terms of the GNU General Public License version 2 (the
+ * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+ * with the following added to such license:
+ * 
+ * As a special exception, the copyright holders of this software give
+ * you permission to link this software with independent modules, and to
+ * copy and distribute the resulting executable under terms of your
+ * choice, provided that you also meet, for each linked independent
+ * module, the terms and conditions of the license of that module.  An
+ * independent module is a module which is not derived from this
+ * software.  The special exception does not apply to any modifications
+ * of the software.
+ */
+/*
+ * $Id: cmic.h,v 1.1 2008/10/16 09:41:21 mlarsen Exp $
+ * $Copyright: (c) 2005 Broadcom Corp.
+ * All Rights Reserved.$
+ *
+ * File:        cmic.h
+ * Purpose:     Maps out structures used for CMIC operations and
+ *              exports routines and constants.
+ */
+
+#ifndef _SOC_CMIC_H
+#define _SOC_CMIC_H
+
+/* IRQ Register (RO) */
+#define CMIC_IRQ_STAT                   0x00000144
+
+/* IRQ Mask Registers (R/W) */
+#define CMIC_IRQ_MASK                   0x00000148
+#define CMIC_IRQ_MASK_1                 0x0000006C
+#define CMIC_IRQ_MASK_2                 0x00000070
+
+#endif  /* !_SOC_CMIC_H */

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/make/Make.config

+#
+#  Unless you and Broadcom execute a separate written software license
+#  agreement governing use of this software, this software is licensed to
+#  you under the terms of the GNU General Public License version 2 (the
+#  "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+#  with the following added to such license:
+#  
+#  As a special exception, the copyright holders of this software give
+#  you permission to link this software with independent modules, and to
+#  copy and distribute the resulting executable under terms of your
+#  choice, provided that you also meet, for each linked independent
+#  module, the terms and conditions of the license of that module.  An
+#  independent module is a module which is not derived from this
+#  software.  The special exception does not apply to any modifications
+#  of the software.
+#
+# $Id: Make.config,v 1.3 2011/09/08 06:37:31 mlarsen Exp $
+# $Copyright: (c) 2005 Broadcom Corp.
+# All Rights Reserved.$
+#
+
+ifneq ($(strip $(override-target)),)
+override TARGET=$(override-target)
+endif
+
+export TARGET
+
+#
+# Set up the target name, and the target base variables.
+#
+# target = The full name of the target such as vxworks-bmw
+# targetbase = 1st part of target (e.g. vxworks)
+# targetplat = 2nd part of target (e.g. x86) if any; otherwise same as 1st
+#
+target     = ${TARGET}
+targetsplt = $(subst -, , ${target})	# change hyphens to spaces
+targetbase = $(word 1,${targetsplt})
+targetplat = $(subst ${targetbase}-,,${TARGET})
+
+#
+# Common configuration for all platforms
+# (Additional platform-dependent configurations are in Makefile.xxx)
+#
+
+#
+# THIS FILE SHOULD NOT BE MODIFIED LOCALLY, to override, add a file
+# $SDK/make/Make.local that sets your local settings, and/or provide
+# a path to your settings using the MAKE_LOCAL variable.  If 
+# either of these files exists, their values will override those in this makefile.
+#
+ifdef MAKE_LOCAL
+-include        ${MAKE_LOCAL}
+endif
+
+-include	${SDK}/make/Make.local
+
+ifdef ALL_CHIPS
+ ROBO_CHIPS = 1
+ ESW_CHIPS = 1
+else
+ ifndef ROBO_CHIPS
+  ESW_CHIPS = 1
+ endif
+endif # ALL_CHIPS
+
+#
+# By default, turn off the "changing directory" message.
+#
+MAKEFLAGS += --no-print-directory
+
+#
+# Use gmake by default
+#
+
+include ${SDK}/make/Make.tools
+include	${SDK}/make/Makefile.${target}
+
+# use QUIET=1 to control printing of compilation lines
+ifdef	QUIET
+Q:=@
+else
+Q:=
+endif
+
+#
+# Suffix to add to the "target" files to allow local builds with different
+# flags. Set "target_suffix" to XXX to cause the build to put built objects
+# in ${target}${target_suffix}. This allows things like building a debug
+# version with different flags.  This may also be set in another Makefile.
+#
+
+#target_suffix :=
+
+#
+# Optional suffix to add to the build directory and output binary files
+# to allow multiple builds to co-exist for various reasons.
+#
+#chip_suffix := -$(shell echo $(CHIP) | tr A-Z a-z)
+
+#
+# Combined suffixes
+#
+all_suffix = ${chip_suffix}${target_suffix}
+
+#
+# Default location to place binaries and make depend files for building
+# purposes.
+#
+ifeq "$(HOSTTYPE)" "Windows2000PC"
+BLDROOTWITHDRIVE = ${SDK}/build/${target}${all_suffix}${bldroot_suffix}
+BLDROOT = ${SDK_NO_DRIVE_NAME}/build/${target}${all_suffix}${bldroot_suffix}
+else # ifeq "$(HOSTTYPE)" "Windows2000PC"
+
+ifndef SDKBUILD
+SDKBUILD :=build
+endif
+
+BLDROOT = ${SDK}/${SDKBUILD}/$(if ${BLDCONFIG},${BLDCONFIG}/)${target}${all_suffix}${bldroot_suffix}
+
+endif # ifeq "$(HOSTTYPE)" "Windows2000PC"
+
+# This is needed because we cannot include Make.vxworks before Make.config
+ifndef DEST_DIR_SUFFIX
+export DEST_DIR_SUFFIX :=$(subst $(realpath $(SDK))/systems,,$(realpath $(CURDIR)/$(dir ($(firstword $(MAKEFILE_LIST))))))
+ifeq ($(MAKELEVEL),0)
+endif
+endif
+
+ifeq ($(DEST_DIR),)
+export DEST_DIR :=${SDK}/${SDKBUILD}$(if ${BLDCONFIG},/${BLDCONFIG})$(DEST_DIR_SUFFIX)
+endif
+
+ifdef LOCALDIR
+BLDDIR = ${BLDROOT}/${LOCALDIR}
+ifeq "$(HOSTTYPE)" "Windows2000PC"
+BLDDIRWITHDRIVE = ${BLDROOTWITHDRIVE}/${LOCALDIR}
+endif
+else # ifdef LOCALDIR
+BLDDIR = ${BLDROOT}
+ifeq "$(HOSTTYPE)" "Windows2000PC"
+BLDDIRWITHDRIVE = ${BLDROOTWITHDRIVE}
+endif
+endif # ifdef LOCALDIR
+
+LIBDIR = ${BLDROOT}
+
+#
+# Export directory, where build objects used by the outside world are
+# placed (exported header files, libs, bins)
+#
+EXPDIR = ${SDK}/export/${target}${all_suffix}
+
+#
+# Standard include paths
+#
+INCDIR	= ${SDK}/include
+
+#
+# Compilation Flags
+#
+# Flags may be added to (see below)
+#
+
+INCFLAGS = -I${INCDIR} -I${SDK}/systems
+
+CFLAGS += ${INCFLAGS}
+CXXFLAGS += ${INCFLAGS}
+CPPFLAGS += ${INCFLAGS}
+
+#
+# Debug #ifdef control
+#
+# Compiling out #ifdef DEBUG code saves about 1.3% on executable size.
+# It is recommended to leave debug enabled when developing applications.
+#
+ifndef DEBUG_IFDEFS
+DEBUG_IFDEFS=TRUE
+endif
+
+ifeq ($(DEBUG_IFDEFS),TRUE)
+CFLAGS += -DBROADCOM_DEBUG
+CXXFLAGS += -DBROADCOM_DEBUG
+CPPFLAGS += -DBROADCOM_DEBUG
+endif
+
+#
+# Debug symbol information control
+#
+ifndef DEBUG_SYMBOLS
+DEBUG_SYMBOLS=TRUE
+endif
+
+ifeq ($(DEBUG_SYMBOLS),TRUE)
+CFLAGS += -g
+CXXFLAGS += -g
+CPPFLAGS += -g
+endif
+
+#
+# If DEBUG_CFLAGS is set, add its contents to CFLAGS.
+# May be useful for setting on the command line or adding to Make.local.
+# Example: gmake DEBUG_CFLAGS=-save-temps system.c
+#
+
+ifneq ($(DEBUG_CFLAGS),)
+CFLAGS += $(DEBUG_CFLAGS)
+CXXFLAGS += $(DEBUG_CFLAGS)
+CPPFLAGS += $(DEBUG_CFLAGS)
+endif
+
+#
+# Optimization level
+#
+# Set DEBUG_OPTIMIZE to TRUE (default) to use a normal optimization
+#		determined by OPTFLAGS_DEFAULT in the platform Makefile.
+# Set DEBUG_OPTIMIZE to FALSE to use no optimization,
+#		strongly recommended when using any debugger.
+# Set DEBUG_OPTIMIZE to any other option string to request specific
+#		optimization flags (for example -O2).
+#
+ifndef DEBUG_OPTIMIZE
+DEBUG_OPTIMIZE=TRUE
+endif
+
+ifeq ($(DEBUG_OPTIMIZE),TRUE)
+OPTFLAGS += $(OPTFLAGS_DEFAULT)
+else
+ifneq ($(DEBUG_OPTIMIZE),FALSE)
+OPTFLAGS += $(DEBUG_OPTIMIZE)
+endif
+endif
+
+#
+# Debug assertion control.
+#
+# Compiling out assert() saves about 1.1% on executable size,
+# however doing so is VERY MUCH discouraged.
+#
+ifndef DEBUG_ASSERTS
+DEBUG_ASSERTS=TRUE
+endif
+
+ifeq ($(DEBUG_ASSERTS),FALSE)
+CFLAGS += -DNDEBUG
+CXXFLAGS += -DNDEBUG
+CPPFLAGS += -DNDEBUG
+endif
+
+#
+# GCC pedantic mode.
+#
+ifeq ($(DEBUG_PEDANTIC),TRUE)
+CFGFLAGS += -D__PEDANTIC__
+CFLAGS += --pedantic
+CXXFLAGS += --pedantic
+endif
+
+#
+# In each directory, build a list of local sources, objects, and headers
+#
+LSRCS	=	$(wildcard *.c *.cpp *.s *.cc *.C)
+LOBJS	=	$(addsuffix .o, $(basename ${LSRCS}))
+BOBJS	= 	$(addprefix ${BLDDIR}/,${LOBJS})
+LHDRS	=	$(wildcard *.h *.H)
+LDOTIS	=	$(wildcard *.i)
+
+
+#
+# Rule to create object file (build) directory
+#
+
+.PHONY: all install clean distclean
+
+.PRECIOUS: ${BLDDIR}/.tree
+
+%/.tree:
+	@$(ECHO) 'Creating build directory $(dir $@)'
+	@$(MKDIR) $(dir $@)
+	@$(ECHO) "Build Directory for ${LOCALDIR} Created" > $@
+
+# Rule allowing build through CPP only, creates .E file from .c file.
+
+%.E: %.c
+	$Q${CC} -E ${CFLAGS} $< | sed -e '/^ *$$/d' -e p -e d > $@
+
+# Rule allowing build through source only, creates .s file from .c file.
+
+%.s: %.c
+	$Q${CC} -S ${CFLAGS} $<
+
+#
+# Default Build rules for .c --> .o, leaving the binary in BLDDIR/X.o,
+# even if file not built from directory of source.
+#
+ifeq ($(FAST),1)
+${BLDDIR}/%.o: %.c
+else
+ifdef GENERATE_C_FILES
+${BLDDIR}/%.o: %.c
+else
+${BLDDIR}/%.o: %.c
+endif
+endif
+ifdef QUIET
+	@${ECHO} Compiling ${LOCALDIR}/$<
+endif
+ifdef LOCAL_D_FILE
+	$Q$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -o $@ -c $< --write-user-dependencies
+	-@/bin/cp $*.d $(BLDDIR)/$*.d
+	-@/bin/rm -f $*.d
+else
+	$Q$(CC) -MD -MF $(BLDDIR)/$*.d $(CFLAGS) $(EXTRA_CFLAGS) -o $@ -c $<
+endif
+	@/bin/cp $(BLDDIR)/$*.d $(BLDDIR)/$*.tmp;\
+	/bin/sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \
+	-e '/^$$/ d' -e 's/$$/ :/' \
+	< $(BLDDIR)/$*.d >> $(BLDDIR)/$*.tmp; \
+	/bin/sed \
+	-e 's| \([0-9a-zA-Z]\)| '$(SDK)/$(LOCALDIR)'\/\1|g' \
+	-e 's|^\([0-9a-zA-Z]\)|'$(SDK)/$(LOCALDIR)'/\1|g' \
+	-e 's| \(\.\.\/\)| '$(SDK)/$(LOCALDIR)'\/\1|g' \
+	-e 's|'$(SDK)'|'$$\{SDK\}'|g' \
+	-e 's/\w*\/\.\.\/*//g' \
+	-e 's/\w*\/\.\.\/*//g' \
+	-e 's/\w*\/\.\.\/*//g' \
+	< $(BLDDIR)/$*.tmp > $(BLDDIR)/$*.P; \
+	/bin/rm -f $(BLDDIR)/$*.d $(BLDDIR)/$*.tmp
+
+${BLDDIR}/%.o: %.s
+ifdef QUIET
+	@${ECHO} Assembling ${LOCALDIR}/$<
+endif
+	$Q${CC} ${CFLAGS} ${EXTRA_CFLAGS} -c $< -o $@
+
+${BLDDIR}/%.o: %.cpp
+ifdef QUIET
+	@${ECHO} Compiling ${LOCALDIR}/$<
+endif
+	$Q${CXX} -c ${CXXFLAGS} -c $< -o $@
+
+${BLDDIR}/%.o: %.cc ${BLDDIR}/.tree
+ifdef QUIET
+	@${ECHO} Compiling ${LOCALDIR}/$<
+endif
+	$Q${CXX} -c ${CXXFLAGS} -c $< -o $@
+
+#
+# Cause "make foo.o" in any subdirectory to put the object in the build
+# directory instead of the local directory.
+#
+%.o: ${BLDDIR}/%.o
+	@
+
+#
+# List of directories where built objects live.
+# (we are not making the export directories for now)
+#
+#DIRS =	${BLDDIR} ${EXPDIR}/lib ${EXPDIR}/bin ${EXPDIR}/include
+DIRS =	${BLDDIR}
+
+ifeq (C_COMPILER,$(MAKECMDGOALS))
+C_COMPILER:
+	@echo $(CC)
+endif

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/make/Make.depend

+#
+#  Unless you and Broadcom execute a separate written software license
+#  agreement governing use of this software, this software is licensed to
+#  you under the terms of the GNU General Public License version 2 (the
+#  "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+#  with the following added to such license:
+#  
+#  As a special exception, the copyright holders of this software give
+#  you permission to link this software with independent modules, and to
+#  copy and distribute the resulting executable under terms of your
+#  choice, provided that you also meet, for each linked independent
+#  module, the terms and conditions of the license of that module.  An
+#  independent module is a module which is not derived from this
+#  software.  The special exception does not apply to any modifications
+#  of the software.
+#
+# $Id: Make.depend,v 1.14 2011/04/12 15:35:33 yshtil Exp $
+# $Copyright: (c) 2005 Broadcom Corp.
+# All Rights Reserved.$
+#
+# Default rule to build dependencies.  This builds a x.d file for each
+# x.c file that describes the dependencies.  We then conditionally include 
+# the generated .d files.
+#
+
+#
+# If making 'clean', do not include any .d files.  If they are included,
+# gmake intrinsically tries to remake them all.
+#
+ifeq (,$(findstring clean,$(MAKECMDGOALS)))
+
+ZFS      :=$(wildcard *.zf)
+ZFC := $(ZFS:.zf=.c)
+
+ifdef GENERATE_C_FILES
+ifndef GEN_INCS
+$(error "GEN_INCS was not defined")
+endif
+
+ZF_GEN   = ${SDK}/tools/zFrameCodeGen.pl
+
+# 1=.zf
+define ZFS_RULE
+$(1:.zf=Console.c) : $(1:.zf=.c)
+	@echo updated $$@ from $$?
+
+$(1:.zf=.c) : $(1) $(ZF_GEN)
+	@$(PERL) $(ZF_GEN) -s -z . -p . -g $1 -t c
+	@echo generated ${LOCALDIR}/$$@ from $(1)
+	@mv $$(*F).cx $$@
+	@if [ -e $$(*F)Console.cx ] ; then \
+	   mv $$(*F)Console.cx $$(*F)Console.c; \
+	    echo Created $$(*F)Console.c ;\
+	fi
+	@if [ -e $$(*F)Console.hx ] ; then \
+	   echo Created $(GEN_INCS)/$$(*F)Console.hx ;\
+	   mv $$(*F)Console.hx $(GEN_INCS)/ ; \
+	fi
+	@mv $$(*F).hx $(GEN_INCS)/
+endef
+
+$(foreach zf,$(ZFS),$(eval $(call ZFS_RULE,$(zf))))
+
+${BLDDIR}/%.P : ${BLDDIR}/.tree %.c
+
+.PHONY: GENFILES
+GENFILES: $(ZFC)
+
+$(BOBJS) : $(ZFC)
+
+else
+#
+# Attempt to build the depend files.  If it fails, the depend file is
+# removed so that it is not included in later builds.
+#
+${BLDDIR}/%.P : %.c ${BLDDIR}/.tree
+	@$(ECHO) Dependencies for ${LOCALDIR}/$<
+
+${BLDDIR}/%.P : %.cc ${BLDDIR}/.tree
+	@$(ECHO) Dependencies for ${LOCALDIR}/$<
+
+endif
+
+#
+# If there are C or C++ files in this directory, include the 
+# depend files for them.
+#
+
+ifeq ($(findstring _COMPILER,$(MAKECMDGOALS))$(findstring variable,$(MAKECMDGOALS)),)
+ifneq ($(strip ${LSRCS}),)
+ifneq (,$(findstring .o,$(MAKECMDGOALS)))
+-include $(addprefix ${BLDDIR}/,$(MAKECMDGOALS:.o=.P)) $(addprefix ${BLDDIR}/,$(MAKECMDGOALS:.o=.sig))
+else
+-include $(addprefix ${BLDDIR}/,$(addsuffix .P,$(basename $(LSRCS)))) $(addprefix ${BLDDIR}/,$(addsuffix .sig,$(basename $(LSRCS))))
+endif
+endif
+endif
+
+endif	# !CLEANING
+
+clean_d::
+ifdef QUIET
+	@$(ECHO) Cleaning dependencies for ${LOCALDIR}
+endif
+ifdef GENERATE_C_FILES
+	$Q$(RM) $(ZFC:%=$(SDK)/$(LOCALDIR)/%) $(ZFC:%.c=$(SDK)/$(LOCALDIR)/%Console.c)
+endif
+
+clean:: clean_d

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/make/Make.kernlib

+#
+#  Unless you and Broadcom execute a separate written software license
+#  agreement governing use of this software, this software is licensed to
+#  you under the terms of the GNU General Public License version 2 (the
+#  "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+#  with the following added to such license:
+#  
+#  As a special exception, the copyright holders of this software give
+#  you permission to link this software with independent modules, and to
+#  copy and distribute the resulting executable under terms of your
+#  choice, provided that you also meet, for each linked independent
+#  module, the terms and conditions of the license of that module.  An
+#  independent module is a module which is not derived from this
+#  software.  The special exception does not apply to any modifications
+#  of the software.
+#
+# $Id: Make.kernlib,v 1.7 2011/08/21 07:18:42 bhanup Exp $
+# $Copyright: (c) 2005 Broadcom Corp.
+# All Rights Reserved.$
+#
+# Make rules/targets for handling libraries
+
+.SECONDARY:: ${BOBJS}
+
+targetlibsoname = ${lib}.so.${SHAREDLIBVER}
+targetlibrealname = ${targetlibsoname}
+targetlibso = ${LIBDIR}/${targetlibrealname}
+
+ifeq ($(TOOLS),Borland)
+
+LIBSUFFIX=lib
+
+${LIBDIR}/%.lib: ${BORLAND_BOBJS}
+	$(RM) $@
+	$(FOREACH) -subdir "$(LIBDIR)" \
+		"tlib $@ $(foreach obj, $(BORLAND_LOBJS), +-$(obj))"
+
+else	# !Borland
+
+LIBSUFFIX=a
+
+${LIBDIR}/%.a: ${BOBJS}
+ifdef QUIET
+	@$(ECHO) Building library $(notdir $@)
+endif
+	$Q$(RM) $@
+	$Q$(AR) ${ARFLAGS} $@ $(sort ${BOBJS})
+ifeq ($(LINUX_MAKE_SHARED_LIB),1)
+	$(CC) -shared -Wl,-soname,${targetlibsoname} -o ${targetlibso} ${BOBJS} -lc
+endif # LINUX_MAKE_SHARED_LIB #
+endif	# !Borland
+
+targetlib = ${LIBDIR}/${lib}.${LIBSUFFIX}
+
+all:: ${BLDDIR}/.tree ${targetlib}
+
+install:: all
+
+clean::
+ifdef QUIET
+	@$(ECHO) Cleaning objects for ${LOCALDIR} and ${lib}
+endif
+	$Q$(RM) ${BOBJS}
+	$Q$(RM) ${targetlib}
+
+distclean:: clean
+

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/make/Make.lib

+#
+#  Unless you and Broadcom execute a separate written software license
+#  agreement governing use of this software, this software is licensed to
+#  you under the terms of the GNU General Public License version 2 (the
+#  "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+#  with the following added to such license:
+#  
+#  As a special exception, the copyright holders of this software give
+#  you permission to link this software with independent modules, and to
+#  copy and distribute the resulting executable under terms of your
+#  choice, provided that you also meet, for each linked independent
+#  module, the terms and conditions of the license of that module.  An
+#  independent module is a module which is not derived from this
+#  software.  The special exception does not apply to any modifications
+#  of the software.
+#
+# $Id: Make.lib,v 1.14 2010/11/18 00:27:38 yshtil Exp $
+# $Copyright: (c) 2005 Broadcom Corp.
+# All Rights Reserved.$
+#
+# Make rules/targets for handling libraries
+
+.SECONDARY:: ${BOBJS}
+
+BOBJS_FAST = ${BOBJS}
+BOBJS_MAKE_CMD =
+
+ifeq ($(FAST),1)
+  ifneq ($(strip $(BOBJS)),)
+    BOBJS_FAST =
+    BOBJS_ARGS = -j9
+    BOBJS_MAKE_CMD = pwd && make LSRUN=$(SDK)/tools/lsrun.pl $(BOBJS_ARGS) ${BOBJS}
+  endif
+endif
+
+ifeq ($(TOOLS),Borland)
+
+LIBSUFFIX=lib
+
+${LIBDIR}/%.lib: ${BORLAND_BOBJS}
+	$(RM) $@
+	$(FOREACH) -subdir "$(LIBDIR)" \
+		"tlib $@ $(foreach obj, $(BORLAND_LOBJS), +-$(obj))"
+
+else	# !Borland
+
+ifeq ($(LINUX_MAKE_SHARED_LIB),1)
+LIBSUFFIX=so.${SHAREDLIBVER}
+else
+LIBSUFFIX=a
+endif
+
+targetlib = ${LIBDIR}/${lib}.${LIBSUFFIX}
+
+all:: ${BLDDIR}/.tree ${targetlib}
+
+${LIBDIR}/%.${LIBSUFFIX}: ${BOBJS_FAST}
+	$(BOBJS_MAKE_CMD)
+ifdef QUIET
+	@$(ECHO) Building library $(notdir $@)
+endif
+	$Q$(RM) $@
+ifeq ($(LINUX_MAKE_SHARED_LIB),1)
+	$(CC) -shared -Wl,-soname,${lib}.${LIBSUFFIX} -o ${targetlib} ${BOBJS} -lc
+else
+	${Q}cd $(dir $(word 1,${BOBJS}));$(AR) ${ARFLAGS} $@ $(sort $(notdir ${BOBJS}))
+endif
+
+endif	# !Borland
+
+
+install:: all
+
+clean::
+ifdef QUIET
+	@$(ECHO) Cleaning objects for ${LOCALDIR} and ${lib}
+endif
+	$Q$(RM) ${BOBJS}
+	$Q$(RM) ${targetlib}
+
+distclean:: clean

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/make/Make.linux

+#
+#  Unless you and Broadcom execute a separate written software license
+#  agreement governing use of this software, this software is licensed to
+#  you under the terms of the GNU General Public License version 2 (the
+#  "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+#  with the following added to such license:
+#  
+#  As a special exception, the copyright holders of this software give
+#  you permission to link this software with independent modules, and to
+#  copy and distribute the resulting executable under terms of your
+#  choice, provided that you also meet, for each linked independent
+#  module, the terms and conditions of the license of that module.  An
+#  independent module is a module which is not derived from this
+#  software.  The special exception does not apply to any modifications
+#  of the software.
+#
+#
+# $Id: Make.linux,v 1.18 2012/03/02 15:09:07 yaronm Exp $
+# $Copyright: (c) 2005 Broadcom Corp.
+# All Rights Reserved.$
+# 
+# Common make targets for Linux user and kernel builds included by top
+# level Linux makefiles
+#
+# Variables referenced:
+#
+# LINUX_MAKE_FLAGS
+#   Additional flags passed to Make
+#
+# LINUX_MAKE_USER
+#   Defined: user build
+#   Undefined: kernel build
+#
+# LINUX_MAKE_DIR
+#   Common makefile location, if it is not ../common
+#
+#
+
+export DEST_DIR_SUFFIX :=$(subst $(realpath $(SDK))/systems,,$(realpath $(CURDIR)/$(dir ($(firstword $(MAKEFILE_LIST))))))
+
+ifeq (,$(kernel_version))
+kernel_version=2_4
+endif
+
+ifndef LINUX_MAKE_SHARED_LIB
+LINUX_MAKE_SHARED_LIB=0
+endif
+
+ifeq (,$(SHAREDLIBVER))
+SHAREDLIBVER=1
+endif
+
+ifndef LINUX_MAKE_DIR
+ifdef LINUX_MAKE_USER
+LINUX_MAKE_DIR := $(SDK)/systems/linux/user/common
+else
+LINUX_MAKE_DIR := $(SDK)/systems/linux/kernel/common
+endif
+endif
+
+ifdef LINUX_MAKE_USER
+  CMD = $(LINUX_MAKE_FLAGS) -C $(LINUX_MAKE_DIR) \
+        platform=$(platform) bldroot_suffix=/$(platform) kernel_version=$(kernel_version) \
+        LINUX_MAKE_SHARED_LIB=$(LINUX_MAKE_SHARED_LIB) SHAREDLIBVER=$(SHAREDLIBVER)
+else
+  export LINUX_MAKE_KERNEL := 1
+  CMD = $(LINUX_MAKE_FLAGS) -C $(LINUX_MAKE_DIR) \
+        platform=$(platform) kernel_version=$(kernel_version)
+endif
+
+ifneq (,$(MIPS_TOOLS_DIR))
+  CMD += MIPS_TOOLS_DIR=$(MIPS_TOOLS_DIR)
+endif
+
+ifneq (,$(MIPS_CROSS_COMPILE))
+  CMD += MIPS_CROSS_COMPILE=$(MIPS_CROSS_COMPILE)
+endif
+
+ifneq (,$(LINUX_INCLUDE))
+  CMD += LINUX_INCLUDE=$(LINUX_INCLUDE)
+endif
+
+# gmake does not understand $(CMD) to be a submake
+# options are to +$(CMD) or $(MAKE) $(CMD)
+# trying the latter
+build:
+	$(MAKE) $(CMD)
+
+DELIVER clean C_COMPILER CXX_COMPILER variable mod bcm user:
+	$(MAKE) $(CMD) $@
+
+clean_d: clean
+
+distclean:
+	$(MAKE) $(CMD) $@
+
+.PHONY: build clean distclean clean_d DELIVER variable mod bcm user
+

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/make/Make.subdirs

+#
+#  Unless you and Broadcom execute a separate written software license
+#  agreement governing use of this software, this software is licensed to
+#  you under the terms of the GNU General Public License version 2 (the
+#  "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+#  with the following added to such license:
+#  
+#  As a special exception, the copyright holders of this software give
+#  you permission to link this software with independent modules, and to
+#  copy and distribute the resulting executable under terms of your
+#  choice, provided that you also meet, for each linked independent
+#  module, the terms and conditions of the license of that module.  An
+#  independent module is a module which is not derived from this
+#  software.  The special exception does not apply to any modifications
+#  of the software.
+#
+# $Id: Make.subdirs,v 1.8 2010/06/22 15:23:57 alai Exp $
+# $Copyright: (c) 2005 Broadcom Corp.
+# All Rights Reserved.$
+#
+# Make rules/targets for handling subdirectories
+
+.PHONY: ${subdirs}
+
+all:: ${subdirs}
+ifdef QUIET
+	@$(ECHO) Subdirectory build for ${subdirs}
+endif
+
+${subdirs}::
+	$Q$(MAKE) -C $@ kernel_version=$(kernel_version) LINUX_MAKE_SHARED_LIB=${LINUX_MAKE_SHARED_LIB} SHAREDLIBVER=${SHAREDLIBVER}
+
+ifeq "$(HOSTTYPE)" "Windows2000PC"
+clean clean_d install distclean::
+ifdef QUIET
+	@$(ECHO) Subdirectory $@ for ${subdirs}
+endif
+	$Q$(FOREACH) "$(subdirs)" "${MAKE} -C ## $@"
+else
+clean clean_d install distclean::
+ifdef QUIET
+	@$(ECHO) Subdirectory $@ for ${subdirs}
+endif
+	@(for name in $(subdirs); do $(MAKE) -C $$name $@; done)
+endif

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/make/Make.tools

+#
+#  Unless you and Broadcom execute a separate written software license
+#  agreement governing use of this software, this software is licensed to
+#  you under the terms of the GNU General Public License version 2 (the
+#  "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+#  with the following added to such license:
+#  
+#  As a special exception, the copyright holders of this software give
+#  you permission to link this software with independent modules, and to
+#  copy and distribute the resulting executable under terms of your
+#  choice, provided that you also meet, for each linked independent
+#  module, the terms and conditions of the license of that module.  An
+#  independent module is a module which is not derived from this
+#  software.  The special exception does not apply to any modifications
+#  of the software.
+#
+# $Id: Make.tools,v 1.2 2011/09/06 21:30:39 yshtil Exp $
+# $Copyright: (c) 2005 Broadcom Corp.
+# All Rights Reserved.$
+
+SYSNAME	:= $(shell uname -s)
+HCC ?=/usr/bin/gcc
+SED	= /bin/sed
+COMPRESS = /usr/bin/compress
+PERL    = /usr/bin/perl
+LN	= /bin/ln
+HOSTTYPE= i386-linux
+
+#
+# Platform Independent
+#
+MKTOOL	=	$(PERL) ${SDK}/tools/mktool.pl
+RM	=	$(MKTOOL) -rm
+MKDIR	=	$(MKTOOL) -md
+FOREACH	=	$(MKTOOL) -foreach
+CP	=	$(MKTOOL) -cp
+MAKEDEP	=	$(MKTOOL) -dep 
+ECHO	=	$(MKTOOL) -echo
+MKBEEP	=	${MKTOOL} -beep

ubuntu/opennsl/OpenNSL/sdk-6.4.10-gpl-modules/make/Makefile.linux-kmodule

+#
+#  Unless you and Broadcom execute a separate written software license
+#  agreement governing use of this software, this software is licensed to
+#  you under the terms of the GNU General Public License version 2 (the
+#  "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php,
+#  with the following added to such license:
+#  
+#  As a special exception, the copyright holders of this software give
+#  you permission to link this software with independent modules, and to
+#  copy and distribute the resulting executable under terms of your
+#  choice, provided that you also meet, for each linked independent
+#  module, the terms and conditions of the license of that module.  An
+#  independent module is a module which is not derived from this
+#  software.  The special exception does not apply to any modifications
+#  of the software.
+#
+# $Id: Makefile.linux-kmodule-3_6,v 1.2 2013/01/10 01:00:49 bpeela Exp $
+# $Copyright: (c) 2006 Broadcom Corp.
+# All Rights Reserved.$
+
+# Due to the extensive use of driver libraries, the SDK usually builds
+# kernel modules from a precompiled object. To avoid various warnings
+# and conflicts, the pre-compiled object must be named differently
+# from the target module, and the object file itself should be
+# appended with "_shipped".
+
+# If a module exports any symbols, then the exporting source file must
+# be compiled within the kernel source tree for correct generation of
+# module symbol versions. The symbol source file should be passed to
+# this Makefile via the MODULE_SYM variable.
+
+MODULE := $(MOD_NAME).o
+KMODULE := $(MOD_NAME).ko
+PRE_COMPILED_OBJ := obj_$(MOD_NAME).o
+
+obj-m := $(MODULE)
+$(MOD_NAME)-y := $(MODULE_SYM) $(PRE_COMPILED_OBJ)
+
+
+ifeq (,$(CROSS_COMPILE))
+
+export CROSS_COMPILE
+
+endif
+
+SAVE_CFLAGS := ${CFLAGS}
+
+include $(SDK)/make/Make.config
+
+PWD := $(shell pwd)
+
+ifneq ($(ARCH),)
+# ELDK does not seem to `automatically' define ARCH where other gccs may
+A := ARCH=$(ARCH)
+export ARCH
+endif
+
+# Standard SDK include path for building source files that export
+# kernel symbols.
+
+override EXTRA_CFLAGS = -I${SDK}/include -I${SDK}/systems/linux/kernel/modules/include -I${SDK}/systems/bde/linux/include
+
+# The precopiled object needs a dummy command file to avoid warnings
+# from the Kbuild scripts (modpost stage).
+# Kernels before 2.6.17 do not support external module symbols files,
+# so we create a dummy to prevent build failures.
+	
+$(KMODULE):
+	rm -f *.o *.ko .*.cmd
+	rm -fr .tmp_versions
+	ln -s $(LIBDIR)/$(MODULE) $(PRE_COMPILED_OBJ)_shipped
+	echo "suppress warning" > .$(PRE_COMPILED_OBJ).cmd
+	$(MAKE) -C $(KERNDIR) CROSS_COMPILE=$(CROSS_COMPILE) M=$(PWD) modules
+	if [ ! -f Module.symvers ]; then echo "old kernel (pre-2.6.17)" > Module.symvers; fi
+	cp -f $(KMODULE) $(LIBDIR)
+	rm -f $(PRE_COMPILED_OBJ)_shipped
+
+EXTRA_CFLAGS = $(CFLAGS)
+CFLAGS := ${SAVE_CFLAGS}