Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  intr_remapping: Fix section mismatch in ir_dev_scope_init()
  intel-iommu: Fix section mismatch in dmar_parse_rmrr_atsr_dev()
  x86, amd: Fix up numa_node information for AMD CPU family 15h model 0-0fh northbridge functions
  x86, AMD: Correct align_va_addr documentation
  x86/rtc, mrst: Don't register a platform RTC device for for Intel MID platforms
  x86/mrst: Battery fixes
  x86/paravirt: PTE updates in k(un)map_atomic need to be synchronous, regardless of lazy_mmu mode
  x86: Fix "Acer Aspire 1" reboot hang
  x86/mtrr: Resolve inconsistency with Intel processor manual
  x86: Document rdmsr_safe restrictions
  x86, microcode: Fix the failure path of microcode update driver init code
  Add TAINT_FIRMWARE_WORKAROUND on MTRR fixup
  x86/mpparse: Account for bus types other than ISA and PCI
  x86, mrst: Change the pmic_gpio device type to IPC
  mrst: Added some platform data for the SFI translations
  x86,mrst: Power control commands update
  x86/reboot: Blacklist Dell OptiPlex 990 known to require PCI reboot
  x86, UV: Fix UV2 hub part number
  x86: Add user_mode_vm check in stack_overflow_check

Documentation/kernel-parameters.txt

@@ -315,8 +315,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			CPU-intensive style benchmark, and it can vary highly in
 			a microbenchmark depending on workload and compiler.
 
-			1: only for 32-bit processes
-			2: only for 64-bit processes
+			32: only for 32-bit processes
+			64: only for 64-bit processes
 			on: enable for both 32- and 64-bit processes
 			off: disable for both 32- and 64-bit processes
 

arch/x86/include/asm/intel_scu_ipc.h

@@ -3,11 +3,15 @@
 
 #include <linux/notifier.h>
 
-#define IPCMSG_VRTC	0xFA	 /* Set vRTC device */
-
-/* Command id associated with message IPCMSG_VRTC */
-#define IPC_CMD_VRTC_SETTIME      1 /* Set time */
-#define IPC_CMD_VRTC_SETALARM     2 /* Set alarm */
+#define IPCMSG_WARM_RESET	0xF0
+#define IPCMSG_COLD_RESET	0xF1
+#define IPCMSG_SOFT_RESET	0xF2
+#define IPCMSG_COLD_BOOT	0xF3
+
+#define IPCMSG_VRTC		0xFA	 /* Set vRTC device */
+	/* Command id associated with message IPCMSG_VRTC */
+	#define IPC_CMD_VRTC_SETTIME      1 /* Set time */
+	#define IPC_CMD_VRTC_SETALARM     2 /* Set alarm */
 
 /* Read single register */
 int intel_scu_ipc_ioread8(u16 addr, u8 *data);

arch/x86/include/asm/mrst.h

@@ -31,11 +31,20 @@ enum mrst_cpu_type {
 };
 
 extern enum mrst_cpu_type __mrst_cpu_chip;
+
+#ifdef CONFIG_X86_INTEL_MID
+
 static inline enum mrst_cpu_type mrst_identify_cpu(void)
 {
 	return __mrst_cpu_chip;
 }
 
+#else /* !CONFIG_X86_INTEL_MID */
+
+#define mrst_identify_cpu()    (0)
+
+#endif /* !CONFIG_X86_INTEL_MID */
+
 enum mrst_timer_options {
 	MRST_TIMER_DEFAULT,
 	MRST_TIMER_APBT_ONLY,

arch/x86/include/asm/msr.h

@@ -169,7 +169,14 @@ static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high)
 	return native_write_msr_safe(msr, low, high);
 }
 
-/* rdmsr with exception handling */
+/*
+ * rdmsr with exception handling.
+ *
+ * Please note that the exception handling works only after we've
+ * switched to the "smart" #GP handler in trap_init() which knows about
+ * exception tables - using this macro earlier than that causes machine
+ * hangs on boxes which do not implement the @msr in the first argument.
+ */
 #define rdmsr_safe(msr, p1, p2)					\
 ({								\
 	int __err;						\

arch/x86/include/asm/uv/uv_mmrs.h

@@ -57,6 +57,7 @@
 
 #define UV1_HUB_PART_NUMBER	0x88a5
 #define UV2_HUB_PART_NUMBER	0x8eb8
+#define UV2_HUB_PART_NUMBER_X	0x1111
 
 /* Compat: if this #define is present, UV headers support UV2 */
 #define UV2_HUB_IS_SUPPORTED	1

arch/x86/kernel/apic/x2apic_uv_x.c

@@ -93,6 +93,8 @@ static int __init early_get_pnodeid(void)
 
 	if (node_id.s.part_number == UV2_HUB_PART_NUMBER)
 		uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
+	if (node_id.s.part_number == UV2_HUB_PART_NUMBER_X)
+		uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1;
 
 	uv_hub_info->hub_revision = uv_min_hub_revision_id;
 	pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1);

arch/x86/kernel/cpu/mtrr/generic.c

@@ -547,6 +547,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 
 		if (tmp != mask_lo) {
 			printk(KERN_WARNING "mtrr: your BIOS has configured an incorrect mask, fixing it.\n");
+			add_taint(TAINT_FIRMWARE_WORKAROUND);
 			mask_lo = tmp;
 		}
 	}
@@ -693,6 +694,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
 
 	/* Disable MTRRs, and set the default type to uncached */
 	mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi);
+	wbinvd();
 }
 
 static void post_set(void) __releases(set_atomicity_lock)

arch/x86/kernel/irq_64.c

@@ -38,6 +38,9 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 	u64 curbase = (u64)task_stack_page(current);
 
+	if (user_mode_vm(regs))
+		return;
+
 	WARN_ONCE(regs->sp >= curbase &&
 		  regs->sp <= curbase + THREAD_SIZE &&
 		  regs->sp <  curbase + sizeof(struct thread_info) +

arch/x86/kernel/microcode_core.c

@@ -256,7 +256,7 @@ static int __init microcode_dev_init(void)
 	return 0;
 }
 
-static void microcode_dev_exit(void)
+static void __exit microcode_dev_exit(void)
 {
 	misc_deregister(&microcode_dev);
 }
@@ -519,10 +519,8 @@ static int __init microcode_init(void)
 
 	microcode_pdev = platform_device_register_simple("microcode", -1,
 							 NULL, 0);
-	if (IS_ERR(microcode_pdev)) {
-		microcode_dev_exit();
+	if (IS_ERR(microcode_pdev))
 		return PTR_ERR(microcode_pdev);
-	}
 
 	get_online_cpus();
 	mutex_lock(&microcode_mutex);
@@ -532,14 +530,12 @@ static int __init microcode_init(void)
 	mutex_unlock(&microcode_mutex);
 	put_online_cpus();
 
-	if (error) {
-		platform_device_unregister(microcode_pdev);
-		return error;
-	}
+	if (error)
+		goto out_pdev;
 
 	error = microcode_dev_init();
 	if (error)
-		return error;
+		goto out_sysdev_driver;
 
 	register_syscore_ops(&mc_syscore_ops);
 	register_hotcpu_notifier(&mc_cpu_notifier);
@@ -548,6 +544,20 @@ static int __init microcode_init(void)
 		" <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n");
 
 	return 0;
+
+out_sysdev_driver:
+	get_online_cpus();
+	mutex_lock(&microcode_mutex);
+
+	sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
+
+	mutex_unlock(&microcode_mutex);
+	put_online_cpus();
+
+out_pdev:
+	platform_device_unregister(microcode_pdev);
+	return error;
+
 }
 module_init(microcode_init);
 

arch/x86/kernel/mpparse.c

@@ -95,8 +95,8 @@ static void __init MP_bus_info(struct mpc_bus *m)
 	}
 #endif
 
+	set_bit(m->busid, mp_bus_not_pci);
 	if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
-		set_bit(m->busid, mp_bus_not_pci);
 #if defined(CONFIG_EISA) || defined(CONFIG_MCA)
 		mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
 #endif

arch/x86/kernel/quirks.c

@@ -553,4 +553,17 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC,
 			quirk_amd_nb_node);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK,
 			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4,
+			quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5,
+			quirk_amd_nb_node);
+
 #endif

arch/x86/kernel/reboot.c

@@ -124,7 +124,7 @@ __setup("reboot=", reboot_setup);
  */
 
 /*
- * Some machines require the "reboot=b"  commandline option,
+ * Some machines require the "reboot=b" or "reboot=k"  commandline options,
  * this quirk makes that automatic.
  */
 static int __init set_bios_reboot(const struct dmi_system_id *d)
@@ -136,6 +136,15 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int __init set_kbd_reboot(const struct dmi_system_id *d)
+{
+	if (reboot_type != BOOT_KBD) {
+		reboot_type = BOOT_KBD;
+		printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident);
+	}
+	return 0;
+}
+
 static struct dmi_system_id __initdata reboot_dmi_table[] = {
 	{	/* Handle problems with rebooting on Dell E520's */
 		.callback = set_bios_reboot,
@@ -295,7 +304,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 		},
 	},
 	{ /* Handle reboot issue on Acer Aspire one */
-		.callback = set_bios_reboot,
+		.callback = set_kbd_reboot,
 		.ident = "Acer Aspire One A110",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -443,6 +452,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"),
 		},
 	},
+	{	/* Handle problems with rebooting on the OptiPlex 990. */
+		.callback = set_pci_reboot,
+		.ident = "Dell OptiPlex 990",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
+		},
+	},
 	{ }
 };
 

arch/x86/kernel/rtc.c

@@ -12,6 +12,7 @@
 #include <asm/vsyscall.h>
 #include <asm/x86_init.h>
 #include <asm/time.h>
+#include <asm/mrst.h>
 
 #ifdef CONFIG_X86_32
 /*
@@ -242,6 +243,10 @@ static __init int add_rtc_cmos(void)
 	if (of_have_populated_dt())
 		return 0;
 
+	/* Intel MID platforms don't have ioport rtc */
+	if (mrst_identify_cpu())
+		return -ENODEV;
+
 	platform_device_register(&rtc_device);
 	dev_info(&rtc_device.dev,
 		 "registered platform RTC device (no PNP device found)\n");

arch/x86/mm/highmem_32.c

@@ -45,6 +45,7 @@ void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	BUG_ON(!pte_none(*(kmap_pte-idx)));
 	set_pte(kmap_pte-idx, mk_pte(page, prot));
+	arch_flush_lazy_mmu_mode();
 
 	return (void *)vaddr;
 }
@@ -88,6 +89,7 @@ void __kunmap_atomic(void *kvaddr)
 		 */
 		kpte_clear_flush(kmap_pte-idx, vaddr);
 		kmap_atomic_idx_pop();
+		arch_flush_lazy_mmu_mode();
 	}
 #ifdef CONFIG_DEBUG_HIGHMEM
 	else {

arch/x86/platform/mrst/mrst.c

@@ -76,6 +76,20 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
 EXPORT_SYMBOL_GPL(sfi_mrtc_array);
 int sfi_mrtc_num;
 
+static void mrst_power_off(void)
+{
+	if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
+		intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 1);
+}
+
+static void mrst_reboot(void)
+{
+	if (__mrst_cpu_chip == MRST_CPU_CHIP_LINCROFT)
+		intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0);
+	else
+		intel_scu_ipc_simple_command(IPCMSG_COLD_BOOT, 0);
+}
+
 /* parse all the mtimer info to a static mtimer array */
 static int __init sfi_parse_mtmr(struct sfi_table_header *table)
 {
@@ -265,17 +279,6 @@ static int mrst_i8042_detect(void)
 	return 0;
 }
 
-/* Reboot and power off are handled by the SCU on a MID device */
-static void mrst_power_off(void)
-{
-	intel_scu_ipc_simple_command(0xf1, 1);
-}
-
-static void mrst_reboot(void)
-{
-	intel_scu_ipc_simple_command(0xf1, 0);
-}
-
 /*
  * Moorestown does not have external NMI source nor port 0x61 to report
  * NMI status. The possible NMI sources are from pmu as a result of NMI
@@ -484,6 +487,46 @@ static void __init *max7315_platform_data(void *info)
 	return max7315;
 }
 
+static void *tca6416_platform_data(void *info)
+{
+	static struct pca953x_platform_data tca6416;
+	struct i2c_board_info *i2c_info = info;
+	int gpio_base, intr;
+	char base_pin_name[SFI_NAME_LEN + 1];
+	char intr_pin_name[SFI_NAME_LEN + 1];
+
+	strcpy(i2c_info->type, "tca6416");
+	strcpy(base_pin_name, "tca6416_base");
+	strcpy(intr_pin_name, "tca6416_int");
+
+	gpio_base = get_gpio_by_name(base_pin_name);
+	intr = get_gpio_by_name(intr_pin_name);
+
+	if (gpio_base == -1)
+		return NULL;
+	tca6416.gpio_base = gpio_base;
+	if (intr != -1) {
+		i2c_info->irq = intr + MRST_IRQ_OFFSET;
+		tca6416.irq_base = gpio_base + MRST_IRQ_OFFSET;
+	} else {
+		i2c_info->irq = -1;
+		tca6416.irq_base = -1;
+	}
+	return &tca6416;
+}
+
+static void *mpu3050_platform_data(void *info)
+{
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("mpu3050_int");
+
+	if (intr == -1)
+		return NULL;
+
+	i2c_info->irq = intr + MRST_IRQ_OFFSET;
+	return NULL;
+}
+
 static void __init *emc1403_platform_data(void *info)
 {
 	static short intr2nd_pdata;
@@ -646,12 +689,15 @@ static void *msic_ocd_platform_data(void *info)
 static const struct devs_id __initconst device_ids[] = {
 	{"bma023", SFI_DEV_TYPE_I2C, 1, &no_platform_data},
 	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
+	{"pmic_gpio", SFI_DEV_TYPE_IPC, 1, &pmic_gpio_platform_data},
 	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
 	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
 	{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+	{"tca6416", SFI_DEV_TYPE_I2C, 1, &tca6416_platform_data},
 	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
 	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
 	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+	{"mpu3050", SFI_DEV_TYPE_I2C, 1, &mpu3050_platform_data},
 
 	/* MSIC subdevices */
 	{"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},

drivers/iommu/intel-iommu.c

@@ -3524,7 +3524,7 @@ int dmar_find_matched_atsr_unit(struct pci_dev *dev)
 	return 0;
 }
 
-int dmar_parse_rmrr_atsr_dev(void)
+int __init dmar_parse_rmrr_atsr_dev(void)
 {
 	struct dmar_rmrr_unit *rmrr, *rmrr_n;
 	struct dmar_atsr_unit *atsr, *atsr_n;

drivers/iommu/intr_remapping.c

@@ -773,7 +773,7 @@ int __init parse_ioapics_under_ir(void)
 	return ir_supported;
 }
 
-int ir_dev_scope_init(void)
+int __init ir_dev_scope_init(void)
 {
 	if (!intr_remapping_enabled)
 		return 0;

drivers/power/intel_mid_battery.c

@@ -61,7 +61,8 @@ MODULE_PARM_DESC(debug, "Flag to enable PMIC Battery debug messages.");
 #define PMIC_BATT_CHR_SBATDET_MASK	(1 << 5)
 #define PMIC_BATT_CHR_SDCLMT_MASK	(1 << 6)
 #define PMIC_BATT_CHR_SUSBOVP_MASK	(1 << 7)
-#define PMIC_BATT_CHR_EXCPT_MASK	0xC6
+#define PMIC_BATT_CHR_EXCPT_MASK	0x86
+
 #define PMIC_BATT_ADC_ACCCHRG_MASK	(1 << 31)
 #define PMIC_BATT_ADC_ACCCHRGVAL_MASK	0x7FFFFFFF
 
@@ -304,11 +305,6 @@ static void pmic_battery_read_status(struct pmic_power_module_info *pbi)
 			pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
 			pmic_battery_log_event(BATT_EVENT_BATOVP_EXCPT);
 			batt_exception = 1;
-		} else if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) {
-			pbi->batt_health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
-			pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
-			pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT);
-			batt_exception = 1;
 		} else if (r8 & PMIC_BATT_CHR_STEMP_MASK) {
 			pbi->batt_health = POWER_SUPPLY_HEALTH_OVERHEAT;
 			pbi->batt_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
@@ -316,6 +312,10 @@ static void pmic_battery_read_status(struct pmic_power_module_info *pbi)
 			batt_exception = 1;
 		} else {
 			pbi->batt_health = POWER_SUPPLY_HEALTH_GOOD;
+			if (r8 & PMIC_BATT_CHR_SDCLMT_MASK) {
+				/* PMIC will change charging current automatically */
+				pmic_battery_log_event(BATT_EVENT_DCLMT_EXCPT);
+			}
 		}
 	}
 

include/linux/pci_ids.h

@@ -517,8 +517,12 @@
 #define PCI_DEVICE_ID_AMD_11H_NB_DRAM	0x1302
 #define PCI_DEVICE_ID_AMD_11H_NB_MISC	0x1303
 #define PCI_DEVICE_ID_AMD_11H_NB_LINK	0x1304
+#define PCI_DEVICE_ID_AMD_15H_NB_F0	0x1600
+#define PCI_DEVICE_ID_AMD_15H_NB_F1	0x1601
+#define PCI_DEVICE_ID_AMD_15H_NB_F2	0x1602
 #define PCI_DEVICE_ID_AMD_15H_NB_F3	0x1603
 #define PCI_DEVICE_ID_AMD_15H_NB_F4	0x1604
+#define PCI_DEVICE_ID_AMD_15H_NB_F5	0x1605
 #define PCI_DEVICE_ID_AMD_CNB17H_F3	0x1703
 #define PCI_DEVICE_ID_AMD_LANCE		0x2000
 #define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001