spi: s3c64xx: Extract FIFO depth calculation to a dedicated macro

Simplify the code by extracting all cases of FIFO depth calculation into
a dedicated macro. No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://msgid.link/r/20240120170001.3356-1-semen.protsenko@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-s3c64xx.c

@@ -109,6 +109,7 @@
 #define TX_FIFO_LVL(v, i) (((v) >> 6) & FIFO_LVL_MASK(i))
 #define RX_FIFO_LVL(v, i) (((v) >> (i)->port_conf->rx_lvl_offset) & \
 					FIFO_LVL_MASK(i))
+#define FIFO_DEPTH(i) ((FIFO_LVL_MASK(i) >> 1) + 1)
 
 #define S3C64XX_SPI_MAX_TRAILCNT	0x3ff
 #define S3C64XX_SPI_TRAILCNT_OFF	19
@@ -406,7 +407,7 @@ static bool s3c64xx_spi_can_dma(struct spi_controller *host,
 	struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host);
 
 	if (sdd->rx_dma.ch && sdd->tx_dma.ch) {
-		return xfer->len > (FIFO_LVL_MASK(sdd) >> 1) + 1;
+		return xfer->len > FIFO_DEPTH(sdd);
 	} else {
 		return false;
 	}
@@ -495,9 +496,7 @@ static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
 	void __iomem *regs = sdd->regs;
 	unsigned long val = 1;
 	u32 status;
-
-	/* max fifo depth available */
-	u32 max_fifo = (FIFO_LVL_MASK(sdd) >> 1) + 1;
+	u32 max_fifo = FIFO_DEPTH(sdd);
 
 	if (timeout_ms)
 		val = msecs_to_loops(timeout_ms);
@@ -604,7 +603,7 @@ static int s3c64xx_wait_for_pio(struct s3c64xx_spi_driver_data *sdd,
 	 * For any size less than the fifo size the below code is
 	 * executed atleast once.
 	 */
-	loops = xfer->len / ((FIFO_LVL_MASK(sdd) >> 1) + 1);
+	loops = xfer->len / FIFO_DEPTH(sdd);
 	buf = xfer->rx_buf;
 	do {
 		/* wait for data to be received in the fifo */
@@ -741,7 +740,7 @@ static int s3c64xx_spi_transfer_one(struct spi_controller *host,
 				    struct spi_transfer *xfer)
 {
 	struct s3c64xx_spi_driver_data *sdd = spi_controller_get_devdata(host);
-	const unsigned int fifo_len = (FIFO_LVL_MASK(sdd) >> 1) + 1;
+	const unsigned int fifo_len = FIFO_DEPTH(sdd);
 	const void *tx_buf = NULL;
 	void *rx_buf = NULL;
 	int target_len = 0, origin_len = 0;
@@ -1280,7 +1279,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d with %d Targets attached\n",
 					sdd->port_id, host->num_chipselect);
 	dev_dbg(&pdev->dev, "\tIOmem=[%pR]\tFIFO %dbytes\n",
-					mem_res, (FIFO_LVL_MASK(sdd) >> 1) + 1);
+					mem_res, FIFO_DEPTH(sdd));
 
 	pm_runtime_mark_last_busy(&pdev->dev);
 	pm_runtime_put_autosuspend(&pdev->dev);