Merge tag 'timers-v5.11-2' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clocksource/events updates from Daniel Lezcano:

 - Fix error handling if no clock is available on dw_apb_timer_of (Dinh Nguyen)

 - Fix overhead for erratum handling when the timer has no erratum and
   fix fault programing for the event stream on the arm arch timer
   (Keqian Zhu)

 - Fix potential deadlock when calling runtime PM on sh_cmt (Niklas
   Söderlund)

drivers/clocksource/arm_arch_timer.c

@@ -396,10 +396,10 @@ static void erratum_set_next_event_tval_generic(const int access, unsigned long
 	ctrl &= ~ARCH_TIMER_CTRL_IT_MASK;
 
 	if (access == ARCH_TIMER_PHYS_ACCESS) {
-		cval = evt + arch_counter_get_cntpct();
+		cval = evt + arch_counter_get_cntpct_stable();
 		write_sysreg(cval, cntp_cval_el0);
 	} else {
-		cval = evt + arch_counter_get_cntvct();
+		cval = evt + arch_counter_get_cntvct_stable();
 		write_sysreg(cval, cntv_cval_el0);
 	}
 
@@ -822,15 +822,24 @@ static void arch_timer_evtstrm_enable(int divider)
 
 static void arch_timer_configure_evtstream(void)
 {
-	int evt_stream_div, pos;
+	int evt_stream_div, lsb;
+
+	/*
+	 * As the event stream can at most be generated at half the frequency
+	 * of the counter, use half the frequency when computing the divider.
+	 */
+	evt_stream_div = arch_timer_rate / ARCH_TIMER_EVT_STREAM_FREQ / 2;
+
+	/*
+	 * Find the closest power of two to the divisor. If the adjacent bit
+	 * of lsb (last set bit, starts from 0) is set, then we use (lsb + 1).
+	 */
+	lsb = fls(evt_stream_div) - 1;
+	if (lsb > 0 && (evt_stream_div & BIT(lsb - 1)))
+		lsb++;
 
-	/* Find the closest power of two to the divisor */
-	evt_stream_div = arch_timer_rate / ARCH_TIMER_EVT_STREAM_FREQ;
-	pos = fls(evt_stream_div);
-	if (pos > 1 && !(evt_stream_div & (1 << (pos - 2))))
-		pos--;
 	/* enable event stream */
-	arch_timer_evtstrm_enable(min(pos, 15));
+	arch_timer_evtstrm_enable(max(0, min(lsb, 15)));
 }
 
 static void arch_counter_set_user_access(void)

drivers/clocksource/dw_apb_timer_of.c

@@ -14,12 +14,13 @@
 #include <linux/reset.h>
 #include <linux/sched_clock.h>
 
-static void __init timer_get_base_and_rate(struct device_node *np,
+static int __init timer_get_base_and_rate(struct device_node *np,
 				    void __iomem **base, u32 *rate)
 {
 	struct clk *timer_clk;
 	struct clk *pclk;
 	struct reset_control *rstc;
+	int ret;
 
 	*base = of_iomap(np, 0);
 
@@ -46,55 +47,67 @@ static void __init timer_get_base_and_rate(struct device_node *np,
 			pr_warn("pclk for %pOFn is present, but could not be activated\n",
 				np);
 
+	if (!of_property_read_u32(np, "clock-freq", rate) &&
+	    !of_property_read_u32(np, "clock-frequency", rate))
+		return 0;
+
 	timer_clk = of_clk_get_by_name(np, "timer");
 	if (IS_ERR(timer_clk))
-		goto try_clock_freq;
+		return PTR_ERR(timer_clk);
 
-	if (!clk_prepare_enable(timer_clk)) {
-		*rate = clk_get_rate(timer_clk);
-		return;
-	}
+	ret = clk_prepare_enable(timer_clk);
+	if (ret)
+		return ret;
+
+	*rate = clk_get_rate(timer_clk);
+	if (!(*rate))
+		return -EINVAL;
 
-try_clock_freq:
-	if (of_property_read_u32(np, "clock-freq", rate) &&
-	    of_property_read_u32(np, "clock-frequency", rate))
-		panic("No clock nor clock-frequency property for %pOFn", np);
+	return 0;
 }
 
-static void __init add_clockevent(struct device_node *event_timer)
+static int __init add_clockevent(struct device_node *event_timer)
 {
 	void __iomem *iobase;
 	struct dw_apb_clock_event_device *ced;
 	u32 irq, rate;
+	int ret = 0;
 
 	irq = irq_of_parse_and_map(event_timer, 0);
 	if (irq == 0)
 		panic("No IRQ for clock event timer");
 
-	timer_get_base_and_rate(event_timer, &iobase, &rate);
+	ret = timer_get_base_and_rate(event_timer, &iobase, &rate);
+	if (ret)
+		return ret;
 
 	ced = dw_apb_clockevent_init(-1, event_timer->name, 300, iobase, irq,
 				     rate);
 	if (!ced)
-		panic("Unable to initialise clockevent device");
+		return -EINVAL;
 
 	dw_apb_clockevent_register(ced);
+
+	return 0;
 }
 
 static void __iomem *sched_io_base;
 static u32 sched_rate;
 
-static void __init add_clocksource(struct device_node *source_timer)
+static int __init add_clocksource(struct device_node *source_timer)
 {
 	void __iomem *iobase;
 	struct dw_apb_clocksource *cs;
 	u32 rate;
+	int ret;
 
-	timer_get_base_and_rate(source_timer, &iobase, &rate);
+	ret = timer_get_base_and_rate(source_timer, &iobase, &rate);
+	if (ret)
+		return ret;
 
 	cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
 	if (!cs)
-		panic("Unable to initialise clocksource device");
+		return -EINVAL;
 
 	dw_apb_clocksource_start(cs);
 	dw_apb_clocksource_register(cs);
@@ -106,6 +119,8 @@ static void __init add_clocksource(struct device_node *source_timer)
 	 */
 	sched_io_base = iobase + 0x04;
 	sched_rate = rate;
+
+	return 0;
 }
 
 static u64 notrace read_sched_clock(void)
@@ -146,10 +161,14 @@ static struct delay_timer dw_apb_delay_timer = {
 static int num_called;
 static int __init dw_apb_timer_init(struct device_node *timer)
 {
+	int ret = 0;
+
 	switch (num_called) {
 	case 1:
 		pr_debug("%s: found clocksource timer\n", __func__);
-		add_clocksource(timer);
+		ret = add_clocksource(timer);
+		if (ret)
+			return ret;
 		init_sched_clock();
 #ifdef CONFIG_ARM
 		dw_apb_delay_timer.freq = sched_rate;
@@ -158,7 +177,9 @@ static int __init dw_apb_timer_init(struct device_node *timer)
 		break;
 	default:
 		pr_debug("%s: found clockevent timer\n", __func__);
-		add_clockevent(timer);
+		ret = add_clockevent(timer);
+		if (ret)
+			return ret;
 		break;
 	}
 

drivers/clocksource/sh_cmt.c

@@ -319,7 +319,6 @@ static int sh_cmt_enable(struct sh_cmt_channel *ch)
 {
 	int k, ret;
 
-	pm_runtime_get_sync(&ch->cmt->pdev->dev);
 	dev_pm_syscore_device(&ch->cmt->pdev->dev, true);
 
 	/* enable clock */
@@ -394,7 +393,6 @@ static void sh_cmt_disable(struct sh_cmt_channel *ch)
 	clk_disable(ch->cmt->clk);
 
 	dev_pm_syscore_device(&ch->cmt->pdev->dev, false);
-	pm_runtime_put(&ch->cmt->pdev->dev);
 }
 
 /* private flags */
@@ -562,10 +560,16 @@ static int sh_cmt_start(struct sh_cmt_channel *ch, unsigned long flag)
 	int ret = 0;
 	unsigned long flags;
 
+	if (flag & FLAG_CLOCKSOURCE)
+		pm_runtime_get_sync(&ch->cmt->pdev->dev);
+
 	raw_spin_lock_irqsave(&ch->lock, flags);
 
-	if (!(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
+	if (!(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) {
+		if (flag & FLAG_CLOCKEVENT)
+			pm_runtime_get_sync(&ch->cmt->pdev->dev);
 		ret = sh_cmt_enable(ch);
+	}
 
 	if (ret)
 		goto out;
@@ -590,14 +594,20 @@ static void sh_cmt_stop(struct sh_cmt_channel *ch, unsigned long flag)
 	f = ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE);
 	ch->flags &= ~flag;
 
-	if (f && !(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
+	if (f && !(ch->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE))) {
 		sh_cmt_disable(ch);
+		if (flag & FLAG_CLOCKEVENT)
+			pm_runtime_put(&ch->cmt->pdev->dev);
+	}
 
 	/* adjust the timeout to maximum if only clocksource left */
 	if ((flag == FLAG_CLOCKEVENT) && (ch->flags & FLAG_CLOCKSOURCE))
 		__sh_cmt_set_next(ch, ch->max_match_value);
 
 	raw_spin_unlock_irqrestore(&ch->lock, flags);
+
+	if (flag & FLAG_CLOCKSOURCE)
+		pm_runtime_put(&ch->cmt->pdev->dev);
 }
 
 static struct sh_cmt_channel *cs_to_sh_cmt(struct clocksource *cs)