Skip to content

L
linux
Commit 46bf6958 authored by John W. Linville's avatar John W. Linville
Browse files
Options

Merge branch 'wireless-next' of git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx

parents e7480bbb 4b48e687
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 784 additions and 538 deletions
MAINTAINERS
View file @ 46bf6958
......@@ -6321,7 +6321,7 @@ WL1271 WIRELESS DRIVER
M: Luciano Coelho <luciano.coelho@nokia.com>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
S: Maintained
F: drivers/net/wireless/wl12xx/wl1271*
F: include/linux/wl12xx.h
......
arch/arm/mach-omap2/board-zoom-peripherals.c
View file @ 46bf6958
......@@ -213,7 +213,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "wl1271",
.mmc = 3,
.wires = 4,
.caps = MMC_CAP_4_BIT_DATA,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.nonremovable = true,
......
drivers/net/wireless/wl12xx/wl1271.h
View file @ 46bf6958
......@@ -117,10 +117,7 @@ enum {
#define WL1271_TX_SECURITY_LO16(s) ((u16)((s) & 0xffff))
#define WL1271_TX_SECURITY_HI32(s) ((u32)(((s) >> 16) & 0xffffffff))
/*
* Enable/disable 802.11a support for WL1273
*/
#undef WL1271_80211A_ENABLED
#define WL1271_CIPHER_SUITE_GEM 0x00147201
#define WL1271_BUSY_WORD_CNT 1
#define WL1271_BUSY_WORD_LEN (WL1271_BUSY_WORD_CNT * sizeof(u32))
......@@ -133,6 +130,8 @@ enum {
#define ACX_TX_DESCRIPTORS 32
#define WL1271_AGGR_BUFFER_SIZE (4 * PAGE_SIZE)
enum wl1271_state {
WL1271_STATE_OFF,
WL1271_STATE_ON,
......@@ -301,6 +300,7 @@ struct wl1271_rx_mem_pool_addr {
struct wl1271_scan {
struct cfg80211_scan_request *req;
bool *scanned_ch;
bool failed;
u8 state;
u8 ssid[IW_ESSID_MAX_SIZE+1];
size_t ssid_len;
......@@ -350,6 +350,7 @@ struct wl1271 {
#define WL1271_FLAG_IDLE (10)
#define WL1271_FLAG_IDLE_REQUESTED (11)
#define WL1271_FLAG_PSPOLL_FAILURE (12)
#define WL1271_FLAG_STA_STATE_SENT (13)
unsigned long flags;
struct wl1271_partition_set part;
......@@ -362,6 +363,7 @@ struct wl1271 {
u8 *fw;
size_t fw_len;
struct wl1271_nvs_file *nvs;
size_t nvs_len;
s8 hw_pg_ver;
......@@ -408,9 +410,15 @@ struct wl1271 {
/* Rx memory pool address */
struct wl1271_rx_mem_pool_addr rx_mem_pool_addr;
/* Intermediate buffer, used for packet aggregation */
u8 *aggr_buf;
/* The target interrupt mask */
struct work_struct irq_work;
/* Hardware recovery work */
struct work_struct recovery_work;
/* The mbox event mask */
u32 event_mask;
......@@ -419,6 +427,7 @@ struct wl1271 {
/* Are we currently scanning */
struct wl1271_scan scan;
struct delayed_work scan_complete_work;
/* Our association ID */
u16 aid;
......@@ -475,6 +484,8 @@ struct wl1271 {
bool sg_enabled;
bool enable_11a;
struct list_head list;
/* Most recently reported noise in dBm */
......@@ -498,14 +509,4 @@ int wl1271_plt_stop(struct wl1271 *wl);
#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */
#define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
static inline bool wl1271_11a_enabled(void)
{
/* FIXME: this could be determined based on the NVS-INI file */
#ifdef WL1271_80211A_ENABLED
return true;
#else
return false;
#endif
}
#endif
drivers/net/wireless/wl12xx/wl1271_acx.c
View file @ 46bf6958
......@@ -86,40 +86,6 @@ int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth)
return ret;
}
int wl1271_acx_fw_version(struct wl1271 *wl, char *buf, size_t len)
{
struct acx_revision *rev;
int ret;
wl1271_debug(DEBUG_ACX, "acx fw rev");
rev = kzalloc(sizeof(*rev), GFP_KERNEL);
if (!rev) {
ret = -ENOMEM;
goto out;
}
ret = wl1271_cmd_interrogate(wl, ACX_FW_REV, rev, sizeof(*rev));
if (ret < 0) {
wl1271_warning("ACX_FW_REV interrogate failed");
goto out;
}
/* be careful with the buffer sizes */
strncpy(buf, rev->fw_version, min(len, sizeof(rev->fw_version)));
/*
* if the firmware version string is exactly
* sizeof(rev->fw_version) long or fw_len is less than
* sizeof(rev->fw_version) it won't be null terminated
*/
buf[min(len, sizeof(rev->fw_version)) - 1] = '\0';
out:
kfree(rev);
return ret;
}
int wl1271_acx_tx_power(struct wl1271 *wl, int power)
{
struct acx_current_tx_power *acx;
......
drivers/net/wireless/wl12xx/wl1271_acx.h
View file @ 46bf6958
......@@ -100,35 +100,6 @@ struct acx_error_counter {
__le32 seq_num_miss;
} __packed;
struct acx_revision {
struct acx_header header;
/*
* The WiLink firmware version, an ASCII string x.x.x.x,
* that uniquely identifies the current firmware.
* The left most digit is incremented each time a
* significant change is made to the firmware, such as
* code redesign or new platform support.
* The second digit is incremented when major enhancements
* are added or major fixes are made.
* The third digit is incremented for each GA release.
* The fourth digit is incremented for each build.
* The first two digits identify a firmware release version,
* in other words, a unique set of features.
* The first three digits identify a GA release.
*/
char fw_version[20];
/*
* This 4 byte field specifies the WiLink hardware version.
* bits 0 - 15: Reserved.
* bits 16 - 23: Version ID - The WiLink version ID
* (1 = first spin, 2 = second spin, and so on).
* bits 24 - 31: Chip ID - The WiLink chip ID.
*/
__le32 hw_version;
} __packed;
enum wl1271_psm_mode {
/* Active mode */
WL1271_PSM_CAM = 0,
......@@ -1060,7 +1031,6 @@ enum {
ACX_PEER_HT_CAP = 0x0057,
ACX_HT_BSS_OPERATION = 0x0058,
ACX_COEX_ACTIVITY = 0x0059,
ACX_SET_SMART_REFLEX_DEBUG = 0x005A,
ACX_SET_DCO_ITRIM_PARAMS = 0x0061,
DOT11_RX_MSDU_LIFE_TIME = 0x1004,
DOT11_CUR_TX_PWR = 0x100D,
......@@ -1077,7 +1047,6 @@ enum {
int wl1271_acx_wake_up_conditions(struct wl1271 *wl);
int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth);
int wl1271_acx_fw_version(struct wl1271 *wl, char *buf, size_t len);
int wl1271_acx_tx_power(struct wl1271 *wl, int power);
int wl1271_acx_feature_cfg(struct wl1271 *wl);
int wl1271_acx_mem_map(struct wl1271 *wl,
......
drivers/net/wireless/wl12xx/wl1271_boot.c
View file @ 46bf6958
......@@ -225,6 +225,28 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
if (wl->nvs == NULL)
return -ENODEV;
/*
* FIXME: the LEGACY NVS image support (NVS's missing the 5GHz band
* configurations) can be removed when those NVS files stop floating
* around.
*/
if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
if (wl->nvs->general_params.dual_mode_select)
wl->enable_11a = true;
}
if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
(wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
wl->enable_11a)) {
wl1271_error("nvs size is not as expected: %zu != %zu",
wl->nvs_len, sizeof(struct wl1271_nvs_file));
kfree(wl->nvs);
wl->nvs = NULL;
wl->nvs_len = 0;
return -EILSEQ;
}
/* only the first part of the NVS needs to be uploaded */
nvs_len = sizeof(wl->nvs->nvs);
nvs_ptr = (u8 *)wl->nvs->nvs;
......@@ -251,8 +273,10 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
burst_len = nvs_ptr[0];
dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
/* FIXME: Due to our new wl1271_translate_reg_addr function,
we need to add the REGISTER_BASE to the destination */
/*
* Due to our new wl1271_translate_reg_addr function,
* we need to add the REGISTER_BASE to the destination
*/
dest_addr += REGISTERS_BASE;
/* We move our pointer to the data */
......@@ -280,8 +304,6 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
ALIGN(nvs_ptr - (u8 *)wl->nvs->nvs + 7, 4);
nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs;
/* FIXME: The driver sets the partition here, but this is not needed,
since it sets to the same one as currently in use */
/* Now we must set the partition correctly */
wl1271_set_partition(wl, &part_table[PART_WORK]);
......@@ -291,9 +313,6 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
return -ENOMEM;
/* And finally we upload the NVS tables */
/* FIXME: In wl1271, we upload everything at once.
No endianness handling needed here?! The ref driver doesn't do
anything about it at this point */
wl1271_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false);
kfree(nvs_aligned);
......@@ -491,10 +510,7 @@ int wl1271_boot(struct wl1271 *wl)
wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
pause &= ~(WU_COUNTER_PAUSE_VAL); /* FIXME: This should probably be
* WU_COUNTER_PAUSE_VAL instead of
* 0x3ff (magic number ). How does
* this work?! */
pause &= ~(WU_COUNTER_PAUSE_VAL);
pause |= WU_COUNTER_PAUSE_VAL;
wl1271_write32(wl, WU_COUNTER_PAUSE, pause);
......@@ -548,7 +564,6 @@ int wl1271_boot(struct wl1271 *wl)
if (ret < 0)
goto out;
/* FIXME: Need to check whether this is really what we want */
wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
WL1271_ACX_ALL_EVENTS_VECTOR);
......
drivers/net/wireless/wl12xx/wl1271_cmd.c
View file @ 46bf6958
......@@ -94,6 +94,7 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
status = le16_to_cpu(cmd->status);
if (status != CMD_STATUS_SUCCESS) {
wl1271_error("command execute failure %d", status);
ieee80211_queue_work(wl->hw, &wl->recovery_work);
ret = -EIO;
}
......@@ -170,6 +171,39 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
return ret;
}
int wl1271_cmd_ext_radio_parms(struct wl1271 *wl)
{
struct wl1271_ext_radio_parms_cmd *ext_radio_parms;
struct conf_rf_settings *rf = &wl->conf.rf;
int ret;
if (!wl->nvs)
return -ENODEV;
ext_radio_parms = kzalloc(sizeof(*ext_radio_parms), GFP_KERNEL);
if (!ext_radio_parms)
return -ENOMEM;
ext_radio_parms->test.id = TEST_CMD_INI_FILE_RF_EXTENDED_PARAM;
memcpy(ext_radio_parms->tx_per_channel_power_compensation_2,
rf->tx_per_channel_power_compensation_2,
CONF_TX_PWR_COMPENSATION_LEN_2);
memcpy(ext_radio_parms->tx_per_channel_power_compensation_5,
rf->tx_per_channel_power_compensation_5,
CONF_TX_PWR_COMPENSATION_LEN_5);
wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_EXT_RADIO_PARAM: ",
ext_radio_parms, sizeof(*ext_radio_parms));
ret = wl1271_cmd_test(wl, ext_radio_parms, sizeof(*ext_radio_parms), 0);
if (ret < 0)
wl1271_warning("TEST_CMD_INI_FILE_RF_EXTENDED_PARAM failed");
kfree(ext_radio_parms);
return ret;
}
/*
* Poll the mailbox event field until any of the bits in the mask is set or a
* timeout occurs (WL1271_EVENT_TIMEOUT in msecs)
......@@ -182,8 +216,10 @@ static int wl1271_cmd_wait_for_event(struct wl1271 *wl, u32 mask)
timeout = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT);
do {
if (time_after(jiffies, timeout))
if (time_after(jiffies, timeout)) {
ieee80211_queue_work(wl->hw, &wl->recovery_work);
return -ETIMEDOUT;
}
msleep(1);
......@@ -390,18 +426,11 @@ int wl1271_cmd_data_path(struct wl1271 *wl, bool enable)
return ret;
}
int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, bool send)
int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, u32 rates, bool send)
{
struct wl1271_cmd_ps_params *ps_params = NULL;
int ret = 0;
/* FIXME: this should be in ps.c */
ret = wl1271_acx_wake_up_conditions(wl);
if (ret < 0) {
wl1271_error("couldn't set wake up conditions");
goto out;
}
wl1271_debug(DEBUG_CMD, "cmd set ps mode");
ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
......@@ -412,9 +441,9 @@ int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, bool send)
ps_params->ps_mode = ps_mode;
ps_params->send_null_data = send;
ps_params->retries = 5;
ps_params->hang_over_period = 1;
ps_params->null_data_rate = cpu_to_le32(wl->basic_rate_set);
ps_params->retries = wl->conf.conn.psm_entry_nullfunc_retries;
ps_params->hang_over_period = wl->conf.conn.psm_entry_hangover_period;
ps_params->null_data_rate = cpu_to_le32(rates);
ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
sizeof(*ps_params), 0);
......@@ -428,41 +457,6 @@ int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, bool send)
return ret;
}
int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
size_t len)
{
struct cmd_read_write_memory *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd read memory");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
WARN_ON(len > MAX_READ_SIZE);
len = min_t(size_t, len, MAX_READ_SIZE);
cmd->addr = cpu_to_le32(addr);
cmd->size = cpu_to_le32(len);
ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd),
sizeof(*cmd));
if (ret < 0) {
wl1271_error("read memory command failed: %d", ret);
goto out;
}
/* the read command got in */
memcpy(answer, cmd->value, len);
out:
kfree(cmd);
return ret;
}
int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
void *buf, size_t buf_len, int index, u32 rates)
{
......@@ -523,7 +517,7 @@ int wl1271_cmd_build_null_data(struct wl1271 *wl)
}
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, ptr, size, 0,
WL1271_RATE_AUTOMATIC);
wl->basic_rate);
out:
dev_kfree_skb(skb);
......@@ -546,7 +540,7 @@ int wl1271_cmd_build_klv_null_data(struct wl1271 *wl)
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_KLV,
skb->data, skb->len,
CMD_TEMPL_KLV_IDX_NULL_DATA,
WL1271_RATE_AUTOMATIC);
wl->basic_rate);
out:
dev_kfree_skb(skb);
......@@ -623,7 +617,7 @@ int wl1271_build_qos_null_data(struct wl1271 *wl)
return wl1271_cmd_template_set(wl, CMD_TEMPL_QOS_NULL_DATA, &template,
sizeof(template), 0,
WL1271_RATE_AUTOMATIC);
wl->basic_rate);
}
int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id)
......@@ -746,3 +740,31 @@ int wl1271_cmd_disconnect(struct wl1271 *wl)
out:
return ret;
}
int wl1271_cmd_set_sta_state(struct wl1271 *wl)
{
struct wl1271_cmd_set_sta_state *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd set sta state");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->state = WL1271_CMD_STA_STATE_CONNECTED;
ret = wl1271_cmd_send(wl, CMD_SET_STA_STATE, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send set STA state command");
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
drivers/net/wireless/wl12xx/wl1271_cmd.h
View file @ 46bf6958
......@@ -33,12 +33,13 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
size_t res_len);
int wl1271_cmd_general_parms(struct wl1271 *wl);
int wl1271_cmd_radio_parms(struct wl1271 *wl);
int wl1271_cmd_ext_radio_parms(struct wl1271 *wl);
int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type);
int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
int wl1271_cmd_data_path(struct wl1271 *wl, bool enable);
int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, bool send);
int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, u32 rates, bool send);
int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
size_t len);
int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
......@@ -55,6 +56,7 @@ int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
u8 key_size, const u8 *key, const u8 *addr,
u32 tx_seq_32, u16 tx_seq_16);
int wl1271_cmd_disconnect(struct wl1271 *wl);
int wl1271_cmd_set_sta_state(struct wl1271 *wl);
enum wl1271_commands {
CMD_INTERROGATE = 1, /*use this to read information elements*/
......@@ -160,41 +162,6 @@ enum {
MAX_COMMAND_STATUS = 0xff
};
/*
* CMD_READ_MEMORY
*
* The host issues this command to read the WiLink device memory/registers.
*
* Note: The Base Band address has special handling (16 bits registers and
* addresses). For more information, see the hardware specification.
*/
/*
* CMD_WRITE_MEMORY
*
* The host issues this command to write the WiLink device memory/registers.
*
* The Base Band address has special handling (16 bits registers and
* addresses). For more information, see the hardware specification.
*/
#define MAX_READ_SIZE 256
struct cmd_read_write_memory {
struct wl1271_cmd_header header;
/* The address of the memory to read from or write to.*/
__le32 addr;
/* The amount of data in bytes to read from or write to the WiLink
* device.*/
__le32 size;
/* The actual value read from or written to the Wilink. The source
of this field is the Host in WRITE command or the Wilink in READ
command. */
u8 value[MAX_READ_SIZE];
} __packed;
#define CMDMBOX_HEADER_LEN 4
#define CMDMBOX_INFO_ELEM_HEADER_LEN 4
......@@ -313,7 +280,7 @@ enum wl1271_cmd_key_type {
KEY_WEP = 1,
KEY_TKIP = 2,
KEY_AES = 3,
KEY_GEM = 4
KEY_GEM = 4,
};
/* FIXME: Add description for key-types */
......@@ -358,13 +325,14 @@ enum wl1271_channel_tune_bands {
WL1271_CHANNEL_TUNE_BAND_4_9
};
#define WL1271_PD_REFERENCE_POINT_BAND_B_G 0
#define WL1271_PD_REFERENCE_POINT_BAND_B_G 0
#define TEST_CMD_P2G_CAL 0x02
#define TEST_CMD_CHANNEL_TUNE 0x0d
#define TEST_CMD_UPDATE_PD_REFERENCE_POINT 0x1d
#define TEST_CMD_INI_FILE_RADIO_PARAM 0x19
#define TEST_CMD_INI_FILE_GENERAL_PARAM 0x1E
#define TEST_CMD_P2G_CAL 0x02
#define TEST_CMD_CHANNEL_TUNE 0x0d
#define TEST_CMD_UPDATE_PD_REFERENCE_POINT 0x1d
#define TEST_CMD_INI_FILE_RADIO_PARAM 0x19
#define TEST_CMD_INI_FILE_GENERAL_PARAM 0x1E
#define TEST_CMD_INI_FILE_RF_EXTENDED_PARAM 0x26
struct wl1271_general_parms_cmd {
struct wl1271_cmd_header header;
......@@ -397,6 +365,16 @@ struct wl1271_radio_parms_cmd {
u8 padding3[2];
} __packed;
struct wl1271_ext_radio_parms_cmd {
struct wl1271_cmd_header header;
struct wl1271_cmd_test_header test;
u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
u8 padding[3];
} __packed;
struct wl1271_cmd_cal_channel_tune {
struct wl1271_cmd_header header;
......@@ -469,4 +447,13 @@ struct wl1271_cmd_disconnect {
u8 padding;
} __packed;
#define WL1271_CMD_STA_STATE_CONNECTED 1
struct wl1271_cmd_set_sta_state {
struct wl1271_cmd_header header;
u8 state;
u8 padding[3];
} __packed;
#endif /* __WL1271_CMD_H__ */
drivers/net/wireless/wl12xx/wl1271_conf.h
View file @ 46bf6958
......@@ -595,7 +595,7 @@ struct conf_tx_ac_category {
u16 tx_op_limit;
};
#define CONF_TX_MAX_TID_COUNT 7
#define CONF_TX_MAX_TID_COUNT 8
enum {
CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/
......@@ -911,6 +911,22 @@ struct conf_conn_settings {
*/
u8 psm_entry_retries;
/*
* Specifies the maximum number of times to try transmit the PSM entry
* null-func frame for each PSM entry attempt
*
* Range 0 - 255
*/
u8 psm_entry_nullfunc_retries;
/*
* Specifies the time to linger in active mode after successfully
* transmitting the PSM entry null-func frame.
*
* Range 0 - 255 TU's
*/
u8 psm_entry_hangover_period;
/*
*
* Specifies the interval of the connection keep-alive null-func
......@@ -1016,6 +1032,64 @@ struct conf_roam_trigger_settings {
u8 avg_weight_snr_data;
};
struct conf_scan_settings {
/*
* The minimum time to wait on each channel for active scans
*
* Range: 0 - 65536 tu
*/
u16 min_dwell_time_active;
/*
* The maximum time to wait on each channel for active scans
*
* Range: 0 - 65536 tu
*/
u16 max_dwell_time_active;
/*
* The maximum time to wait on each channel for passive scans
*
* Range: 0 - 65536 tu
*/
u16 min_dwell_time_passive;
/*
* The maximum time to wait on each channel for passive scans
*
* Range: 0 - 65536 tu
*/
u16 max_dwell_time_passive;
/*
* Number of probe requests to transmit on each active scan channel
*
* Range: u8
*/
u16 num_probe_reqs;
};
/* these are number of channels on the band divided by two, rounded up */
#define CONF_TX_PWR_COMPENSATION_LEN_2 7
#define CONF_TX_PWR_COMPENSATION_LEN_5 18
struct conf_rf_settings {
/*
* Per channel power compensation for 2.4GHz
*
* Range: s8
*/
u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
/*
* Per channel power compensation for 5GHz
*
* Range: s8
*/
u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
};
struct conf_drv_settings {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
......@@ -1024,6 +1098,8 @@ struct conf_drv_settings {
struct conf_itrim_settings itrim;
struct conf_pm_config_settings pm_config;
struct conf_roam_trigger_settings roam_trigger;
struct conf_scan_settings scan;
struct conf_rf_settings rf;
};
#endif
drivers/net/wireless/wl12xx/wl1271_event.c
View file @ 46bf6958
......@@ -41,6 +41,9 @@ void wl1271_pspoll_work(struct work_struct *work)
mutex_lock(&wl->mutex);
if (unlikely(wl->state == WL1271_STATE_OFF))
goto out;
if (!test_and_clear_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags))
goto out;
......@@ -52,7 +55,7 @@ void wl1271_pspoll_work(struct work_struct *work)
* delivery failure occurred, and no-one changed state since, so
* we should go back to powersave.
*/
wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, true);
wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, wl->basic_rate, true);
out:
mutex_unlock(&wl->mutex);
......@@ -70,7 +73,8 @@ static void wl1271_event_pspoll_delivery_fail(struct wl1271 *wl)
/* force active mode receive data from the AP */
if (test_bit(WL1271_FLAG_PSM, &wl->flags)) {
ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE, true);
ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
wl->basic_rate, true);
if (ret < 0)
return;
set_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags);
......@@ -91,6 +95,7 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
bool *beacon_loss)
{
int ret = 0;
u32 total_retries = wl->conf.conn.psm_entry_retries;
wl1271_debug(DEBUG_EVENT, "ps_status: 0x%x", mbox->ps_status);
......@@ -104,10 +109,10 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
break;
}
if (wl->psm_entry_retry < wl->conf.conn.psm_entry_retries) {
if (wl->psm_entry_retry < total_retries) {
wl->psm_entry_retry++;
ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE,
true);
wl->basic_rate, true);
} else {
wl1271_info("No ack to nullfunc from AP.");
wl->psm_entry_retry = 0;
......@@ -143,7 +148,7 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
/* make sure the firmware goes to active mode - the frame to
be sent next will indicate to the AP, that we are active. */
ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
false);
wl->basic_rate, false);
break;
case EVENT_EXIT_POWER_SAVE_SUCCESS:
default:
......
drivers/net/wireless/wl12xx/wl1271_init.c
View file @ 46bf6958
......@@ -53,6 +53,7 @@ static int wl1271_init_hwenc_config(struct wl1271 *wl)
int wl1271_init_templates_config(struct wl1271 *wl)
{
int ret, i;
size_t size;
/* send empty templates for fw memory reservation */
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, NULL,
......@@ -61,14 +62,12 @@ int wl1271_init_templates_config(struct wl1271 *wl)
if (ret < 0)
return ret;
if (wl1271_11a_enabled()) {
size_t size = sizeof(struct wl12xx_probe_req_template);
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
NULL, size, 0,
WL1271_RATE_AUTOMATIC);
if (ret < 0)
return ret;
}
size = sizeof(struct wl12xx_probe_req_template);
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
NULL, size, 0,
WL1271_RATE_AUTOMATIC);
if (ret < 0)
return ret;
ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, NULL,
sizeof(struct wl12xx_null_data_template),
......@@ -223,6 +222,10 @@ int wl1271_hw_init(struct wl1271 *wl)
if (ret < 0)
return ret;
ret = wl1271_cmd_ext_radio_parms(wl);
if (ret < 0)
return ret;
/* Template settings */
ret = wl1271_init_templates_config(wl);
if (ret < 0)
......@@ -291,8 +294,16 @@ int wl1271_hw_init(struct wl1271 *wl)
if (ret < 0)
goto out_free_memmap;
/* Default TID configuration */
/* Default TID/AC configuration */
BUG_ON(wl->conf.tx.tid_conf_count != wl->conf.tx.ac_conf_count);
for (i = 0; i < wl->conf.tx.tid_conf_count; i++) {
conf_ac = &wl->conf.tx.ac_conf[i];
ret = wl1271_acx_ac_cfg(wl, conf_ac->ac, conf_ac->cw_min,
conf_ac->cw_max, conf_ac->aifsn,
conf_ac->tx_op_limit);
if (ret < 0)
goto out_free_memmap;
conf_tid = &wl->conf.tx.tid_conf[i];
ret = wl1271_acx_tid_cfg(wl, conf_tid->queue_id,
conf_tid->channel_type,
......@@ -305,16 +316,6 @@ int wl1271_hw_init(struct wl1271 *wl)
goto out_free_memmap;
}
/* Default AC configuration */
for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
conf_ac = &wl->conf.tx.ac_conf[i];
ret = wl1271_acx_ac_cfg(wl, conf_ac->ac, conf_ac->cw_min,
conf_ac->cw_max, conf_ac->aifsn,
conf_ac->tx_op_limit);
if (ret < 0)
goto out_free_memmap;
}
/* Configure TX rate classes */
ret = wl1271_acx_rate_policies(wl);
if (ret < 0)
......
drivers/net/wireless/wl12xx/wl1271_main.c
View file @ 46bf6958
This diff is collapsed.
drivers/net/wireless/wl12xx/wl1271_ps.c
View file @ 46bf6958
......@@ -39,6 +39,9 @@ void wl1271_elp_work(struct work_struct *work)
mutex_lock(&wl->mutex);
if (unlikely(wl->state == WL1271_STATE_OFF))
goto out;
if (test_bit(WL1271_FLAG_IN_ELP, &wl->flags) ||
(!test_bit(WL1271_FLAG_PSM, &wl->flags) &&
!test_bit(WL1271_FLAG_IDLE, &wl->flags)))
......@@ -61,7 +64,7 @@ void wl1271_ps_elp_sleep(struct wl1271 *wl)
test_bit(WL1271_FLAG_IDLE, &wl->flags)) {
cancel_delayed_work(&wl->elp_work);
ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
msecs_to_jiffies(ELP_ENTRY_DELAY));
msecs_to_jiffies(ELP_ENTRY_DELAY));
}
}
......@@ -96,6 +99,7 @@ int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake)
&compl, msecs_to_jiffies(WL1271_WAKEUP_TIMEOUT));
if (ret == 0) {
wl1271_error("ELP wakeup timeout!");
ieee80211_queue_work(wl->hw, &wl->recovery_work);
ret = -ETIMEDOUT;
goto err;
} else if (ret < 0) {
......@@ -121,7 +125,7 @@ int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake)
}
int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode,
bool send)
u32 rates, bool send)
{
int ret;
......@@ -129,7 +133,14 @@ int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode,
case STATION_POWER_SAVE_MODE:
wl1271_debug(DEBUG_PSM, "entering psm");
ret = wl1271_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE, send);
ret = wl1271_acx_wake_up_conditions(wl);
if (ret < 0) {
wl1271_error("couldn't set wake up conditions");
return ret;
}
ret = wl1271_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE,
rates, send);
if (ret < 0)
return ret;
......@@ -152,7 +163,8 @@ int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode,
if (ret < 0)
return ret;
ret = wl1271_cmd_ps_mode(wl, STATION_ACTIVE_MODE, send);
ret = wl1271_cmd_ps_mode(wl, STATION_ACTIVE_MODE,
rates, send);
if (ret < 0)
return ret;
......
drivers/net/wireless/wl12xx/wl1271_ps.h
View file @ 46bf6958
......@@ -28,7 +28,7 @@
#include "wl1271_acx.h"
int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode,
bool send);
u32 rates, bool send);
void wl1271_ps_elp_sleep(struct wl1271 *wl);
int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake);
void wl1271_elp_work(struct work_struct *work);
......
drivers/net/wireless/wl12xx/wl1271_rx.c
View file @ 46bf6958
......@@ -74,7 +74,7 @@ static void wl1271_rx_status(struct wl1271 *wl,
}
}
static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length)
static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length)
{
struct wl1271_rx_descriptor *desc;
struct sk_buff *skb;
......@@ -87,16 +87,16 @@ static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length)
* workaround this by not retrieving them at all.
*/
if (unlikely(wl->state == WL1271_STATE_PLT))
return;
return -EINVAL;
skb = __dev_alloc_skb(length, GFP_KERNEL);
if (!skb) {
wl1271_error("Couldn't allocate RX frame");
return;
return -ENOMEM;
}
buf = skb_put(skb, length);
wl1271_read(wl, WL1271_SLV_MEM_DATA, buf, length, true);
memcpy(buf, data, length);
/* the data read starts with the descriptor */
desc = (struct wl1271_rx_descriptor *) buf;
......@@ -116,6 +116,8 @@ static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length)
skb_trim(skb, skb->len - desc->pad_len);
ieee80211_rx_ni(wl->hw, skb);
return 0;
}
void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
......@@ -124,31 +126,60 @@ void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
u32 buf_size;
u32 fw_rx_counter = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
u32 rx_counter;
u32 mem_block;
u32 pkt_length;
u32 pkt_offset;
while (drv_rx_counter != fw_rx_counter) {
mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter);
buf_size = wl1271_rx_get_buf_size(status, drv_rx_counter);
buf_size = 0;
rx_counter = drv_rx_counter;
while (rx_counter != fw_rx_counter) {
pkt_length = wl1271_rx_get_buf_size(status, rx_counter);
if (buf_size + pkt_length > WL1271_AGGR_BUFFER_SIZE)
break;
buf_size += pkt_length;
rx_counter++;
rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
}
if (buf_size == 0) {
wl1271_warning("received empty data");
break;
}
/*
* Choose the block we want to read
* For aggregated packets, only the first memory block should
* be retrieved. The FW takes care of the rest.
*/
mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter);
wl->rx_mem_pool_addr.addr = (mem_block << 8) +
le32_to_cpu(wl_mem_map->packet_memory_pool_start);
wl->rx_mem_pool_addr.addr_extra =
wl->rx_mem_pool_addr.addr + 4;
/* Choose the block we want to read */
wl1271_write(wl, WL1271_SLV_REG_DATA, &wl->rx_mem_pool_addr,
sizeof(wl->rx_mem_pool_addr), false);
wl1271_rx_handle_data(wl, buf_size);
wl->rx_counter++;
drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
sizeof(wl->rx_mem_pool_addr), false);
/* Read all available packets at once */
wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
buf_size, true);
/* Split data into separate packets */
pkt_offset = 0;
while (pkt_offset < buf_size) {
pkt_length = wl1271_rx_get_buf_size(status,
drv_rx_counter);
if (wl1271_rx_handle_data(wl,
wl->aggr_buf + pkt_offset,
pkt_length) < 0)
break;
wl->rx_counter++;
drv_rx_counter++;
drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
pkt_offset += pkt_length;
}
}
wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS,
cpu_to_le32(wl->rx_counter));
}
drivers/net/wireless/wl12xx/wl1271_scan.c
View file @ 46bf6958
......@@ -28,11 +28,43 @@
#include "wl1271_scan.h"
#include "wl1271_acx.h"
void wl1271_scan_complete_work(struct work_struct *work)
{
struct delayed_work *dwork;
struct wl1271 *wl;
dwork = container_of(work, struct delayed_work, work);
wl = container_of(dwork, struct wl1271, scan_complete_work);
wl1271_debug(DEBUG_SCAN, "Scanning complete");
mutex_lock(&wl->mutex);
if (wl->scan.state == WL1271_SCAN_STATE_IDLE) {
mutex_unlock(&wl->mutex);
return;
}
wl->scan.state = WL1271_SCAN_STATE_IDLE;
kfree(wl->scan.scanned_ch);
wl->scan.scanned_ch = NULL;
mutex_unlock(&wl->mutex);
ieee80211_scan_completed(wl->hw, false);
if (wl->scan.failed) {
wl1271_info("Scan completed due to error.");
ieee80211_queue_work(wl->hw, &wl->recovery_work);
}
}
static int wl1271_get_scan_channels(struct wl1271 *wl,
struct cfg80211_scan_request *req,
struct basic_scan_channel_params *channels,
enum ieee80211_band band, bool passive)
{
struct conf_scan_settings *c = &wl->conf.scan;
int i, j;
u32 flags;
......@@ -60,10 +92,17 @@ static int wl1271_get_scan_channels(struct wl1271 *wl,
wl1271_debug(DEBUG_SCAN, "beacon_found %d",
req->channels[i]->beacon_found);
channels[j].min_duration =
cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION);
channels[j].max_duration =
cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION);
if (!passive) {
channels[j].min_duration =
cpu_to_le32(c->min_dwell_time_active);
channels[j].max_duration =
cpu_to_le32(c->max_dwell_time_active);
} else {
channels[j].min_duration =
cpu_to_le32(c->min_dwell_time_passive);
channels[j].max_duration =
cpu_to_le32(c->max_dwell_time_passive);
}
channels[j].early_termination = 0;
channels[j].tx_power_att = req->channels[i]->max_power;
channels[j].channel = req->channels[i]->hw_value;
......@@ -100,8 +139,11 @@ static int wl1271_scan_send(struct wl1271 *wl, enum ieee80211_band band,
/* We always use high priority scans */
scan_options = WL1271_SCAN_OPT_PRIORITY_HIGH;
if(passive)
/* No SSIDs means that we have a forced passive scan */
if (passive || wl->scan.req->n_ssids == 0)
scan_options |= WL1271_SCAN_OPT_PASSIVE;
cmd->params.scan_options = cpu_to_le16(scan_options);
cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req,
......@@ -117,7 +159,7 @@ static int wl1271_scan_send(struct wl1271 *wl, enum ieee80211_band band,
cmd->params.rx_filter_options =
cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
cmd->params.n_probe_reqs = WL1271_SCAN_PROBE_REQS;
cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs;
cmd->params.tx_rate = cpu_to_le32(basic_rate);
cmd->params.tid_trigger = 0;
cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
......@@ -165,7 +207,7 @@ static int wl1271_scan_send(struct wl1271 *wl, enum ieee80211_band band,
void wl1271_scan_stm(struct wl1271 *wl)
{
int ret;
int ret = 0;
switch (wl->scan.state) {
case WL1271_SCAN_STATE_IDLE:
......@@ -185,7 +227,7 @@ void wl1271_scan_stm(struct wl1271 *wl)
ret = wl1271_scan_send(wl, IEEE80211_BAND_2GHZ, true,
wl->conf.tx.basic_rate);
if (ret == WL1271_NOTHING_TO_SCAN) {
if (wl1271_11a_enabled())
if (wl->enable_11a)
wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE;
else
wl->scan.state = WL1271_SCAN_STATE_DONE;
......@@ -215,18 +257,22 @@ void wl1271_scan_stm(struct wl1271 *wl)
break;
case WL1271_SCAN_STATE_DONE:
ieee80211_scan_completed(wl->hw, false);
kfree(wl->scan.scanned_ch);
wl->scan.scanned_ch = NULL;
wl->scan.state = WL1271_SCAN_STATE_IDLE;
wl->scan.failed = false;
cancel_delayed_work(&wl->scan_complete_work);
ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work,
msecs_to_jiffies(0));
break;
default:
wl1271_error("invalid scan state");
break;
}
if (ret < 0) {
cancel_delayed_work(&wl->scan_complete_work);
ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work,
msecs_to_jiffies(0));
}
}
int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
......@@ -249,6 +295,11 @@ int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
wl->scan.scanned_ch = kzalloc(req->n_channels *
sizeof(*wl->scan.scanned_ch),
GFP_KERNEL);
/* we assume failure so that timeout scenarios are handled correctly */
wl->scan.failed = true;
ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work,
msecs_to_jiffies(WL1271_SCAN_TIMEOUT));
wl1271_scan_stm(wl);
return 0;
......
drivers/net/wireless/wl12xx/wl1271_scan.h
View file @ 46bf6958
......@@ -32,6 +32,7 @@ int wl1271_scan_build_probe_req(struct wl1271 *wl,
const u8 *ssid, size_t ssid_len,
const u8 *ie, size_t ie_len, u8 band);
void wl1271_scan_stm(struct wl1271 *wl);
void wl1271_scan_complete_work(struct work_struct *work);
#define WL1271_SCAN_MAX_CHANNELS 24
#define WL1271_SCAN_DEFAULT_TAG 1
......@@ -39,11 +40,10 @@ void wl1271_scan_stm(struct wl1271 *wl);
#define WL1271_SCAN_OPT_ACTIVE 0
#define WL1271_SCAN_OPT_PASSIVE 1
#define WL1271_SCAN_OPT_PRIORITY_HIGH 4
#define WL1271_SCAN_CHAN_MIN_DURATION 30000 /* TU */
#define WL1271_SCAN_CHAN_MAX_DURATION 60000 /* TU */
#define WL1271_SCAN_BAND_2_4_GHZ 0
#define WL1271_SCAN_BAND_5_GHZ 1
#define WL1271_SCAN_PROBE_REQS 3
#define WL1271_SCAN_TIMEOUT 10000 /* msec */
enum {
WL1271_SCAN_STATE_IDLE,
......
drivers/net/wireless/wl12xx/wl1271_sdio.c
View file @ 46bf6958
......@@ -274,9 +274,8 @@ static void __devexit wl1271_remove(struct sdio_func *func)
{
struct wl1271 *wl = sdio_get_drvdata(func);
free_irq(wl->irq, wl);
wl1271_unregister_hw(wl);
free_irq(wl->irq, wl);
wl1271_free_hw(wl);
}
......
drivers/net/wireless/wl12xx/wl1271_spi.c
View file @ 46bf6958
......@@ -63,6 +63,11 @@
((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
#define HW_ACCESS_WSPI_INIT_CMD_MASK 0
/* HW limitation: maximum possible chunk size is 4095 bytes */
#define WSPI_MAX_CHUNK_SIZE 4092
#define WSPI_MAX_NUM_OF_CHUNKS (WL1271_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE)
static inline struct spi_device *wl_to_spi(struct wl1271 *wl)
{
return wl->if_priv;
......@@ -202,90 +207,117 @@ static int wl1271_spi_read_busy(struct wl1271 *wl)
static void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
struct spi_transfer t[3];
struct spi_transfer t[2];
struct spi_message m;
u32 *busy_buf;
u32 *cmd;
u32 chunk_len;
cmd = &wl->buffer_cmd;
busy_buf = wl->buffer_busyword;
while (len > 0) {
chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len);
*cmd = 0;
*cmd |= WSPI_CMD_READ;
*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
cmd = &wl->buffer_cmd;
busy_buf = wl->buffer_busyword;
if (fixed)
*cmd |= WSPI_CMD_FIXED;
*cmd = 0;
*cmd |= WSPI_CMD_READ;
*cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
WSPI_CMD_BYTE_LENGTH;
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
spi_message_init(&m);
memset(t, 0, sizeof(t));
if (fixed)
*cmd |= WSPI_CMD_FIXED;
t[0].tx_buf = cmd;
t[0].len = 4;
t[0].cs_change = true;
spi_message_add_tail(&t[0], &m);
spi_message_init(&m);
memset(t, 0, sizeof(t));
/* Busy and non busy words read */
t[1].rx_buf = busy_buf;
t[1].len = WL1271_BUSY_WORD_LEN;
t[1].cs_change = true;
spi_message_add_tail(&t[1], &m);
t[0].tx_buf = cmd;
t[0].len = 4;
t[0].cs_change = true;
spi_message_add_tail(&t[0], &m);
spi_sync(wl_to_spi(wl), &m);
/* Busy and non busy words read */
t[1].rx_buf = busy_buf;
t[1].len = WL1271_BUSY_WORD_LEN;
t[1].cs_change = true;
spi_message_add_tail(&t[1], &m);
if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) &&
wl1271_spi_read_busy(wl)) {
memset(buf, 0, len);
return;
}
spi_sync(wl_to_spi(wl), &m);
spi_message_init(&m);
memset(t, 0, sizeof(t));
if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) &&
wl1271_spi_read_busy(wl)) {
memset(buf, 0, chunk_len);
return;
}
t[0].rx_buf = buf;
t[0].len = len;
t[0].cs_change = true;
spi_message_add_tail(&t[0], &m);
spi_message_init(&m);
memset(t, 0, sizeof(t));
spi_sync(wl_to_spi(wl), &m);
t[0].rx_buf = buf;
t[0].len = chunk_len;
t[0].cs_change = true;
spi_message_add_tail(&t[0], &m);
spi_sync(wl_to_spi(wl), &m);
wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, chunk_len);
wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
if (!fixed)
addr += chunk_len;
buf += chunk_len;
len -= chunk_len;
}
}
static void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
struct spi_transfer t[2];
struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS];
struct spi_message m;
u32 commands[WSPI_MAX_NUM_OF_CHUNKS];
u32 *cmd;
u32 chunk_len;
int i;
cmd = &wl->buffer_cmd;
*cmd = 0;
*cmd |= WSPI_CMD_WRITE;
*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
if (fixed)
*cmd |= WSPI_CMD_FIXED;
WARN_ON(len > WL1271_AGGR_BUFFER_SIZE);
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = cmd;
t[0].len = sizeof(*cmd);
spi_message_add_tail(&t[0], &m);
cmd = &commands[0];
i = 0;
while (len > 0) {
chunk_len = min((size_t)WSPI_MAX_CHUNK_SIZE, len);
t[1].tx_buf = buf;
t[1].len = len;
spi_message_add_tail(&t[1], &m);
*cmd = 0;
*cmd |= WSPI_CMD_WRITE;
*cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
WSPI_CMD_BYTE_LENGTH;
*cmd |= addr & WSPI_CMD_BYTE_ADDR;
spi_sync(wl_to_spi(wl), &m);
if (fixed)
*cmd |= WSPI_CMD_FIXED;
wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
t[i].tx_buf = cmd;
t[i].len = sizeof(*cmd);
spi_message_add_tail(&t[i++], &m);
t[i].tx_buf = buf;
t[i].len = chunk_len;
spi_message_add_tail(&t[i++], &m);
wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, chunk_len);
if (!fixed)
addr += chunk_len;
buf += chunk_len;
len -= chunk_len;
cmd++;
}
spi_sync(wl_to_spi(wl), &m);
}
static irqreturn_t wl1271_irq(int irq, void *cookie)
......@@ -416,9 +448,8 @@ static int __devexit wl1271_remove(struct spi_device *spi)
{
struct wl1271 *wl = dev_get_drvdata(&spi->dev);
free_irq(wl->irq, wl);
wl1271_unregister_hw(wl);
free_irq(wl->irq, wl);
wl1271_free_hw(wl);
return 0;
......
drivers/net/wireless/wl12xx/wl1271_testmode.c
View file @ 46bf6958
......@@ -199,19 +199,6 @@ static int wl1271_tm_cmd_nvs_push(struct wl1271 *wl, struct nlattr *tb[])
buf = nla_data(tb[WL1271_TM_ATTR_DATA]);
len = nla_len(tb[WL1271_TM_ATTR_DATA]);
/*
* FIXME: the LEGACY NVS image support (NVS's missing the 5GHz band
* configurations) can be removed when those NVS files stop floating
* around.
*/
if (len != sizeof(struct wl1271_nvs_file) &&
(len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
wl1271_11a_enabled())) {
wl1271_error("nvs size is not as expected: %zu != %zu",
len, sizeof(struct wl1271_nvs_file));
return -EMSGSIZE;
}
mutex_lock(&wl->mutex);
kfree(wl->nvs);
......@@ -224,6 +211,7 @@ static int wl1271_tm_cmd_nvs_push(struct wl1271 *wl, struct nlattr *tb[])
}
memcpy(wl->nvs, buf, len);
wl->nvs_len = len;
wl1271_debug(DEBUG_TESTMODE, "testmode pushed nvs");
......
drivers/net/wireless/wl12xx/wl1271_tx.c
View file @ 46bf6958
......@@ -43,13 +43,17 @@ static int wl1271_tx_id(struct wl1271 *wl, struct sk_buff *skb)
return -EBUSY;
}
static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra)
static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
u32 buf_offset)
{
struct wl1271_tx_hw_descr *desc;
u32 total_len = skb->len + sizeof(struct wl1271_tx_hw_descr) + extra;
u32 total_blocks;
int id, ret = -EBUSY;
if (buf_offset + total_len > WL1271_AGGR_BUFFER_SIZE)
return -EBUSY;
/* allocate free identifier for the packet */
id = wl1271_tx_id(wl, skb);
if (id < 0)
......@@ -82,7 +86,7 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra)
return ret;
}
static int wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
u32 extra, struct ieee80211_tx_info *control)
{
struct timespec ts;
......@@ -110,9 +114,9 @@ static int wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
/* configure the tx attributes */
tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
/* queue */
/* queue (we use same identifiers for tid's and ac's */
ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
desc->tid = wl1271_tx_ac_to_tid(ac);
desc->tid = ac;
desc->aid = TX_HW_DEFAULT_AID;
desc->reserved = 0;
......@@ -133,59 +137,17 @@ static int wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
desc->tx_attr = cpu_to_le16(tx_attr);
wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d", pad);
return 0;
}
static int wl1271_tx_send_packet(struct wl1271 *wl, struct sk_buff *skb,
struct ieee80211_tx_info *control)
{
struct wl1271_tx_hw_descr *desc;
int len;
/* FIXME: This is a workaround for getting non-aligned packets.
This happens at least with EAPOL packets from the user space.
Our DMA requires packets to be aligned on a 4-byte boundary.
*/
if (unlikely((long)skb->data & 0x03)) {
int offset = (4 - (long)skb->data) & 0x03;
wl1271_debug(DEBUG_TX, "skb offset %d", offset);
/* check whether the current skb can be used */
if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
unsigned char *src = skb->data;
/* align the buffer on a 4-byte boundary */
skb_reserve(skb, offset);
memmove(skb->data, src, skb->len);
} else {
wl1271_info("No handler, fixme!");
return -EINVAL;
}
}
len = WL1271_TX_ALIGN(skb->len);
/* perform a fixed address block write with the packet */
wl1271_write(wl, WL1271_SLV_MEM_DATA, skb->data, len, true);
/* write packet new counter into the write access register */
wl->tx_packets_count++;
desc = (struct wl1271_tx_hw_descr *) skb->data;
wl1271_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u (%u words)",
desc->id, skb, len, desc->length);
return 0;
}
/* caller must hold wl->mutex */
static int wl1271_tx_frame(struct wl1271 *wl, struct sk_buff *skb)
static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct sk_buff *skb,
u32 buf_offset)
{
struct ieee80211_tx_info *info;
u32 extra = 0;
int ret = 0;
u8 idx;
u32 total_len;
if (!skb)
return -EINVAL;
......@@ -208,19 +170,22 @@ static int wl1271_tx_frame(struct wl1271 *wl, struct sk_buff *skb)
}
}
ret = wl1271_tx_allocate(wl, skb, extra);
ret = wl1271_tx_allocate(wl, skb, extra, buf_offset);
if (ret < 0)
return ret;
ret = wl1271_tx_fill_hdr(wl, skb, extra, info);
if (ret < 0)
return ret;
wl1271_tx_fill_hdr(wl, skb, extra, info);
ret = wl1271_tx_send_packet(wl, skb, info);
if (ret < 0)
return ret;
/*
* The length of each packet is stored in terms of words. Thus, we must
* pad the skb data to make sure its length is aligned.
* The number of padding bytes is computed and set in wl1271_tx_fill_hdr
*/
total_len = WL1271_TX_ALIGN(skb->len);
memcpy(wl->aggr_buf + buf_offset, skb->data, skb->len);
memset(wl->aggr_buf + buf_offset + skb->len, 0, total_len - skb->len);
return ret;
return total_len;
}
u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set)
......@@ -245,7 +210,7 @@ void wl1271_tx_work(struct work_struct *work)
struct sk_buff *skb;
bool woken_up = false;
u32 sta_rates = 0;
u32 prev_tx_packets_count;
u32 buf_offset;
int ret;
/* check if the rates supported by the AP have changed */
......@@ -262,14 +227,15 @@ void wl1271_tx_work(struct work_struct *work)
if (unlikely(wl->state == WL1271_STATE_OFF))
goto out;
prev_tx_packets_count = wl->tx_packets_count;
/* if rates have changed, re-configure the rate policy */
if (unlikely(sta_rates)) {
wl->rate_set = wl1271_tx_enabled_rates_get(wl, sta_rates);
wl1271_acx_rate_policies(wl);
}
/* Prepare the transfer buffer, by aggregating all
* available packets */
buf_offset = 0;
while ((skb = skb_dequeue(&wl->tx_queue))) {
if (!woken_up) {
ret = wl1271_ps_elp_wakeup(wl, false);
......@@ -278,21 +244,30 @@ void wl1271_tx_work(struct work_struct *work)
woken_up = true;
}
ret = wl1271_tx_frame(wl, skb);
ret = wl1271_prepare_tx_frame(wl, skb, buf_offset);
if (ret == -EBUSY) {
/* firmware buffer is full, lets stop transmitting. */
/*
* Either the firmware buffer is full, or the
* aggregation buffer is.
* Queue back last skb, and stop aggregating.
*/
skb_queue_head(&wl->tx_queue, skb);
goto out_ack;
} else if (ret < 0) {
dev_kfree_skb(skb);
goto out_ack;
}
buf_offset += ret;
wl->tx_packets_count++;
}
out_ack:
/* interrupt the firmware with the new packets */
if (prev_tx_packets_count != wl->tx_packets_count)
if (buf_offset) {
wl1271_write(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
buf_offset, true);
/* interrupt the firmware with the new packets */
wl1271_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
}
out:
if (woken_up)
......@@ -422,8 +397,6 @@ void wl1271_tx_reset(struct wl1271 *wl)
struct sk_buff *skb;
/* TX failure */
/* control->flags = 0; FIXME */
while ((skb = skb_dequeue(&wl->tx_queue))) {
wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb);
ieee80211_tx_status(wl->hw, skb);
......
drivers/net/wireless/wl12xx/wl1271_tx.h
View file @ 46bf6958
......@@ -139,23 +139,6 @@ static inline int wl1271_tx_get_queue(int queue)
}
}
/* wl1271 tx descriptor needs the tid and we need to convert it from ac */
static inline int wl1271_tx_ac_to_tid(int ac)
{
switch (ac) {
case 0:
return 0;
case 1:
return 2;
case 2:
return 4;
case 3:
return 6;
default:
return 0;
}
}
void wl1271_tx_work(struct work_struct *work);
void wl1271_tx_complete(struct wl1271 *wl);
void wl1271_tx_reset(struct wl1271 *wl);
......
include/linux/wl12xx.h
View file @ 46bf6958
......@@ -32,7 +32,20 @@ struct wl12xx_platform_data {
int board_ref_clock;
};
#ifdef CONFIG_WL12XX_PLATFORM_DATA
int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);
#else
static inline
int wl12xx_set_platform_data(const struct wl12xx_platform_data *data)
{
return -ENOSYS;
}
#endif
const struct wl12xx_platform_data *wl12xx_get_platform_data(void);
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7