Commit 471a7ba8 authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Mark Brown

ASoC: pcm3168a: add I2S/Left_J TDM support

pcm3168a is supporting TDM on I2S/Left_J, but there is no
settings for it. This patch add it.
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 594680ea
...@@ -33,6 +33,8 @@ ...@@ -33,6 +33,8 @@
#define PCM3168A_FMT_RIGHT_J_16 0x3 #define PCM3168A_FMT_RIGHT_J_16 0x3
#define PCM3168A_FMT_DSP_A 0x4 #define PCM3168A_FMT_DSP_A 0x4
#define PCM3168A_FMT_DSP_B 0x5 #define PCM3168A_FMT_DSP_B 0x5
#define PCM3168A_FMT_I2S_TDM 0x6
#define PCM3168A_FMT_LEFT_J_TDM 0x7
#define PCM3168A_FMT_DSP_MASK 0x4 #define PCM3168A_FMT_DSP_MASK 0x4
#define PCM3168A_NUM_SUPPLIES 6 #define PCM3168A_NUM_SUPPLIES 6
...@@ -401,9 +403,11 @@ static int pcm3168a_hw_params(struct snd_pcm_substream *substream, ...@@ -401,9 +403,11 @@ static int pcm3168a_hw_params(struct snd_pcm_substream *substream,
bool tx, master_mode; bool tx, master_mode;
u32 val, mask, shift, reg; u32 val, mask, shift, reg;
unsigned int rate, fmt, ratio, max_ratio; unsigned int rate, fmt, ratio, max_ratio;
unsigned int chan;
int i, min_frame_size; int i, min_frame_size;
rate = params_rate(params); rate = params_rate(params);
chan = params_channels(params);
ratio = pcm3168a->sysclk / rate; ratio = pcm3168a->sysclk / rate;
...@@ -456,6 +460,21 @@ static int pcm3168a_hw_params(struct snd_pcm_substream *substream, ...@@ -456,6 +460,21 @@ static int pcm3168a_hw_params(struct snd_pcm_substream *substream,
return -EINVAL; return -EINVAL;
} }
/* for TDM */
if (chan > 2) {
switch (fmt) {
case PCM3168A_FMT_I2S:
fmt = PCM3168A_FMT_I2S_TDM;
break;
case PCM3168A_FMT_LEFT_J:
fmt = PCM3168A_FMT_LEFT_J_TDM;
break;
default:
dev_err(component->dev, "TDM is supported under I2S/Left_J only\n");
return -EINVAL;
}
}
if (master_mode) if (master_mode)
val = ((i + 1) << shift); val = ((i + 1) << shift);
else else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment