net: dsa: report and change port dscp priority using dcbnl
Similar to the port-based default priority, IEEE 802.1Q-2018 allows the Application Priority Table to define QoS classes (0 to 7) per IP DSCP value (0 to 63). In the absence of an app table entry for a packet with DSCP value X, QoS classification for that packet falls back to other methods (VLAN PCP or port-based default). The presence of an app table for DSCP value X with priority Y makes the hardware classify the packet to QoS class Y. As opposed to the default-prio where DSA exposes only a "set" in dsa_switch_ops (because the port-based default is the fallback, it always exists, either implicitly or explicitly), for DSCP priorities we expose an "add" and a "del". The addition of a DSCP entry means trusting that DSCP priority, the deletion means ignoring it. Drivers that already trust (at least some) DSCP values can describe their configuration in dsa_switch_ops :: port_get_dscp_prio(), which is called for each DSCP value from 0 to 63. Again, there can be more than one dcbnl app table entry for the same DSCP value, DSA chooses the one with the largest configured priority. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment