mlxsw: reg: Increase trap identifier to 10 bits

The trap identifier was increased to 10 bits in new versions of the
Programmer's Reference Manual (PRM).

Increase it accordingly in the Host PacKet Trap (HPKT) register and in
the Completion Queue Element (CQE).

This is significant for subsequent patches that will introduce trap
identifiers which utilize the extended range.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlxsw/pci_hw.h

@@ -176,7 +176,7 @@ MLXSW_ITEM32(pci, cqe, byte_count, 0x04, 0, 14);
 /* pci_cqe_trap_id
  * Trap ID that captured the packet.
  */
-MLXSW_ITEM32(pci, cqe, trap_id, 0x08, 0, 9);
+MLXSW_ITEM32(pci, cqe, trap_id, 0x08, 0, 10);
 
 /* pci_cqe_crc
  * Length include CRC. Indicates the length field includes

drivers/net/ethernet/mellanox/mlxsw/reg.h

@@ -5778,7 +5778,7 @@ MLXSW_ITEM32(reg, hpkt, trap_group, 0x00, 12, 6);
  * Note: A trap ID can only be associated with a single trap group. The device
  * will associate the trap ID with the last trap group configured.
  */
-MLXSW_ITEM32(reg, hpkt, trap_id, 0x00, 0, 9);
+MLXSW_ITEM32(reg, hpkt, trap_id, 0x00, 0, 10);
 
 enum {
 	MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT,

drivers/net/ethernet/mellanox/mlxsw/trap.h

@@ -108,7 +108,7 @@ enum {
 	MLXSW_TRAP_ID_DISCARD_INGRESS_ACL = 0x1C3,
 	MLXSW_TRAP_ID_DISCARD_EGRESS_ACL = 0x1C4,
 
-	MLXSW_TRAP_ID_MAX = 0x1FF
+	MLXSW_TRAP_ID_MAX = 0x3FF,
 };
 
 enum mlxsw_event_trap_id {