OMAP: control: move plat-omap/control.h to mach-omap2/control.h

Only OMAP2+ platforms have the System Control Module (SCM) IP block.
In the past, we've kept the SCM header file in plat-omap.  This has
led to abuse - device drivers including it; includes being added that
create implicit dependencies on OMAP2+ builds; etc.

In response, move the SCM headers into mach-omap2/.

As part of this, remove the direct SCM access from the OMAP UDC
driver.  It was clearly broken.  The UDC code needs an indepth review for
use on OMAP2+ chips.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Cory Maccarrone <darkstar6262@gmail.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>

arch/arm/mach-omap2/board-3430sdp.c

@@ -39,7 +39,6 @@
 #include <plat/gpmc.h>
 #include <plat/display.h>
 
-#include <plat/control.h>
 #include <plat/gpmc-smc91x.h>
 
 #include "board-flash.h"
@@ -47,6 +46,7 @@
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "hsmmc.h"
 #include "pm.h"
+#include "control.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 

arch/arm/mach-omap2/board-4430sdp.c

@@ -32,12 +32,12 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
 
 #include "hsmmc.h"
 #include "timer-gp.h"
+#include "control.h"
 
 #define ETH_KS8851_IRQ			34
 #define ETH_KS8851_POWER_ON		48

arch/arm/mach-omap2/board-am3517evm.c

@@ -32,11 +32,11 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/display.h>
 
 #include "mux.h"
+#include "control.h"
 
 #define AM35XX_EVM_PHY_MASK		(0xF)
 #define AM35XX_EVM_MDIO_FREQUENCY	(1000000)

arch/arm/mach-omap2/board-apollon.c

@@ -39,9 +39,9 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
-#include <plat/control.h>
 
 #include "mux.h"
+#include "control.h"
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13

arch/arm/mach-omap2/board-cm-t3517.c

@@ -40,7 +40,6 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/nand.h>
 #include <plat/gpmc.h>
@@ -48,6 +47,7 @@
 #include <mach/am35xx.h>
 
 #include "mux.h"
+#include "control.h"
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {

arch/arm/mach-omap2/board-h4.c

@@ -31,7 +31,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/control.h>
 #include <mach/gpio.h>
 #include <plat/usb.h>
 #include <plat/board.h>
@@ -42,6 +41,7 @@
 #include <plat/gpmc.h>
 
 #include "mux.h"
+#include "control.h"
 
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1

arch/arm/mach-omap2/board-ldp.c

@@ -42,12 +42,12 @@
 #include <mach/board-zoom.h>
 
 #include <asm/delay.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 
 #include "board-flash.h"
 #include "mux.h"
 #include "hsmmc.h"
+#include "control.h"
 
 #define LDP_SMSC911X_CS		1
 #define LDP_SMSC911X_GPIO	152

arch/arm/mach-omap2/board-omap3logic.c

@@ -36,6 +36,7 @@
 #include "mux.h"
 #include "hsmmc.h"
 #include "timer-gp.h"
+#include "control.h"
 
 #include <plat/mux.h>
 #include <plat/board.h>
@@ -43,7 +44,6 @@
 #include <plat/gpmc-smsc911x.h>
 #include <plat/gpmc.h>
 #include <plat/sdrc.h>
-#include <plat/control.h>
 
 #define OMAP3LOGIC_SMSC911X_CS			1
 

arch/arm/mach-omap2/board-omap4panda.c

@@ -34,12 +34,12 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
-#include "hsmmc.h"
 #include "timer-gp.h"
 
+#include "hsmmc.h"
+#include "control.h"
 
 static struct gpio_led gpio_leds[] = {
 	{

arch/arm/mach-omap2/clock2420_data.c

@@ -18,7 +18,6 @@
 #include <linux/list.h>
 
 #include <plat/clkdev_omap.h>
-#include <plat/control.h>
 
 #include "clock.h"
 #include "clock2xxx.h"
@@ -28,6 +27,7 @@
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
+#include "control.h"
 
 #define OMAP_CM_REGADDR                 OMAP2420_CM_REGADDR
 

arch/arm/mach-omap2/clock2430_data.c

@@ -18,7 +18,6 @@
 #include <linux/list.h>
 
 #include <plat/clkdev_omap.h>
-#include <plat/control.h>
 
 #include "clock.h"
 #include "clock2xxx.h"
@@ -28,6 +27,7 @@
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
+#include "control.h"
 
 #define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
 

arch/arm/mach-omap2/clock3xxx_data.c

@@ -20,7 +20,6 @@
 #include <linux/clk.h>
 #include <linux/list.h>
 
-#include <plat/control.h>
 #include <plat/clkdev_omap.h>
 
 #include "clock.h"
@@ -33,6 +32,7 @@
 #include "cm-regbits-34xx.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"
+#include "control.h"
 
 /*
  * clocks

arch/arm/mach-omap2/clock44xx_data.c

@@ -26,7 +26,6 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/clk.h>
-#include <plat/control.h>
 #include <plat/clkdev_omap.h>
 
 #include "clock.h"
@@ -35,6 +34,7 @@
 #include "cm-regbits-44xx.h"
 #include "prm.h"
 #include "prm-regbits-44xx.h"
+#include "control.h"
 
 /* Root clocks */
 

arch/arm/mach-omap2/common.c

@@ -19,12 +19,12 @@
 
 #include <plat/common.h>
 #include <plat/board.h>
-#include <plat/control.h>
 #include <plat/mux.h>
 
 #include <plat/clock.h>
 
 #include "sdrc.h"
+#include "control.h"
 
 /* Global address base setup code */
 

arch/arm/mach-omap2/control.c

@@ -16,14 +16,15 @@
 #include <linux/io.h>
 
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/sdrc.h>
+
 #include "cm-regbits-34xx.h"
 #include "prm-regbits-34xx.h"
 #include "cm.h"
 #include "prm.h"
 #include "sdrc.h"
 #include "pm.h"
+#include "control.h"
 
 static void __iomem *omap2_ctrl_base;
 static void __iomem *omap4_ctrl_pad_base;

arch/arm/plat-omap/include/plat/control.h → arch/arm/mach-omap2/control.h

 /*
- * arch/arm/plat-omap/include/mach/control.h
+ * arch/arm/mach-omap2/control.h
  *
  * OMAP2/3/4 System Control Module definitions
  *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2010 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -13,8 +13,8 @@
  * the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
+#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
 
 #include <mach/io.h>
 #include <mach/ctrl_module_core_44xx.h>
@@ -321,12 +321,12 @@
 #define		FEAT_L2CACHE_256KB	3
 
 #define OMAP3_ISP_SHIFT			5
-#define OMAP3_ISP_MASK			(1<< OMAP3_ISP_SHIFT)
+#define OMAP3_ISP_MASK			(1 << OMAP3_ISP_SHIFT)
 #define		FEAT_ISP		0
 #define		FEAT_ISP_NONE		1
 
 #define OMAP3_NEON_SHIFT		4
-#define OMAP3_NEON_MASK			(1<< OMAP3_NEON_SHIFT)
+#define OMAP3_NEON_MASK			(1 << OMAP3_NEON_SHIFT)
 #define		FEAT_NEON		0
 #define		FEAT_NEON_NONE		1
 
@@ -364,5 +364,5 @@ extern void omap3_control_restore_context(void);
 #endif
 #endif	/* __ASSEMBLY__ */
 
-#endif /* __ASM_ARCH_CONTROL_H */
+#endif /* __ARCH_ARM_MACH_OMAP2_CONTROL_H */
 

arch/arm/mach-omap2/cpuidle34xx.c

@@ -29,10 +29,10 @@
 #include <plat/irqs.h>
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
-#include <plat/control.h>
 #include <plat/serial.h>
 
 #include "pm.h"
+#include "control.h"
 
 #ifdef CONFIG_CPU_IDLE
 

arch/arm/mach-omap2/devices.c

@@ -9,7 +9,6 @@
  * (at your option) any later version.
  */
 
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -23,7 +22,6 @@
 #include <asm/mach/map.h>
 #include <asm/pmu.h>
 
-#include <plat/control.h>
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <mach/gpio.h>
@@ -33,6 +31,7 @@
 #include <plat/omap_device.h>
 
 #include "mux.h"
+#include "control.h"
 
 #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
 

arch/arm/mach-omap2/hsmmc.c

@@ -14,11 +14,11 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <mach/hardware.h>
-#include <plat/control.h>
 #include <plat/mmc.h>
 #include <plat/omap-pm.h>
 
 #include "hsmmc.h"
+#include "control.h"
 
 #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 

arch/arm/mach-omap2/id.c

@@ -22,11 +22,12 @@
 #include <asm/cputype.h>
 
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/cpu.h>
 
 #include <mach/id.h>
 
+#include "control.h"
+
 static struct omap_chip_id omap_chip;
 static unsigned int omap_revision;
 

arch/arm/mach-omap2/mcbsp.c

@@ -22,7 +22,9 @@
 #include <plat/dma.h>
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>
-#include <plat/control.h>
+
+#include "control.h"
+
 
 /* McBSP internal signal muxing functions */
 

arch/arm/mach-omap2/mux.c

@@ -23,12 +23,11 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  */
-#include <linux/module.h>
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
 #include <linux/list.h>
+#include <linux/slab.h>
 #include <linux/ctype.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -36,8 +35,7 @@
 
 #include <asm/system.h>
 
-#include <plat/control.h>
-
+#include "control.h"
 #include "mux.h"
 
 #define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */

arch/arm/mach-omap2/pm24xx.c

@@ -38,7 +38,6 @@
 #include <mach/irqs.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
-#include <plat/control.h>
 #include <plat/dma.h>
 #include <plat/board.h>
 
@@ -48,6 +47,7 @@
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 #include "pm.h"
+#include "control.h"
 
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>

arch/arm/mach-omap2/pm34xx.c

@@ -32,7 +32,6 @@
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
 #include <plat/powerdomain.h>
-#include <plat/control.h>
 #include <plat/serial.h>
 #include <plat/sdrc.h>
 #include <plat/prcm.h>
@@ -48,6 +47,7 @@
 #include "prm.h"
 #include "pm.h"
 #include "sdrc.h"
+#include "control.h"
 
 /* Scratchpad offsets */
 #define OMAP343X_TABLE_ADDRESS_OFFSET	   0x31

arch/arm/mach-omap2/prcm.c

@@ -26,7 +26,6 @@
 #include <plat/common.h>
 #include <plat/prcm.h>
 #include <plat/irqs.h>
-#include <plat/control.h>
 
 #include "clock.h"
 #include "clock2xxx.h"
@@ -34,6 +33,7 @@
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-44xx.h"
+#include "control.h"
 
 static void __iomem *prm_base;
 static void __iomem *cm_base;

arch/arm/mach-omap2/serial.c

@@ -35,7 +35,6 @@
 #include <plat/common.h>
 #include <plat/board.h>
 #include <plat/clock.h>
-#include <plat/control.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
@@ -44,6 +43,7 @@
 #include "pm.h"
 #include "cm.h"
 #include "prm-regbits-34xx.h"
+#include "control.h"
 
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */

arch/arm/mach-omap2/sleep34xx.S

@@ -27,11 +27,11 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <plat/control.h>
 
 #include "cm.h"
 #include "prm.h"
 #include "sdrc.h"
+#include "control.h"
 
 #define SDRC_SCRATCHPAD_SEM_V	0xfa00291c
 

arch/arm/mach-omap2/usb-fs.c

@@ -29,18 +29,18 @@
 
 #include <asm/irq.h>
 
-#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 
+#include "control.h"
+#include "mux.h"
+
 #define INT_USB_IRQ_GEN		INT_24XX_USB_IRQ_GEN
 #define INT_USB_IRQ_NISO	INT_24XX_USB_IRQ_NISO
 #define INT_USB_IRQ_ISO		INT_24XX_USB_IRQ_ISO
 #define INT_USB_IRQ_HGEN	INT_24XX_USB_IRQ_HGEN
 #define INT_USB_IRQ_OTG		INT_24XX_USB_IRQ_OTG
 
-#include "mux.h"
-
 #if defined(CONFIG_ARCH_OMAP2)
 
 #ifdef	CONFIG_USB_GADGET_OMAP

arch/arm/plat-omap/include/plat/omap-serial.h

@@ -20,7 +20,6 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
-#include <plat/control.h>
 #include <plat/mux.h>
 
 #define DRIVER_NAME	"omap-hsuart"

arch/arm/plat-omap/mcbsp.c

@@ -27,7 +27,6 @@
 
 #include <plat/dma.h>
 #include <plat/mcbsp.h>
-#include <plat/control.h>
 
 #include "../mach-omap2/cm-regbits-34xx.h"
 

drivers/usb/gadget/omap_udc.c

@@ -54,7 +54,6 @@
 
 #include <plat/dma.h>
 #include <plat/usb.h>
-#include <plat/control.h>
 
 #include "omap_udc.h"
 
@@ -2309,21 +2308,12 @@ static char *trx_mode(unsigned m, int enabled)
 static int proc_otg_show(struct seq_file *s)
 {
 	u32		tmp;
-	u32		trans;
-	char		*ctrl_name;
+	u32		trans = 0;
+	char		*ctrl_name = "(UNKNOWN)";
 
+	/* XXX This needs major revision for OMAP2+ */
 	tmp = omap_readl(OTG_REV);
-	if (cpu_is_omap24xx()) {
-		/*
-		 * REVISIT: Not clear how this works on OMAP2.  trans
-		 * is ANDed to produce bits 7 and 8, which might make
-		 * sense for USB_TRANSCEIVER_CTRL on OMAP1,
-		 * but with CONTROL_DEVCONF, these bits have something to
-		 * do with the frame adjustment counter and McBSP2.
-		 */
-		ctrl_name = "control_devconf";
-		trans = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	} else {
+	if (cpu_class_is_omap1()) {
 		ctrl_name = "tranceiver_ctrl";
 		trans = omap_readw(USB_TRANSCEIVER_CTRL);
 	}