Skip to content

L
linux
Commit 4872f788 authored by Richard Purdie's avatar Richard Purdie Committed by Dmitry Torokhov
Browse files
Options

Input: zaurus keyboard driver updates 

  * Change the scan interval from 100ms to 50ms. This stops the key
    repeat from triggering on double letter presses.
  * Remove unneeded stale hinge code from corgikbd
  * Change unneeded corgi GPIO pins to inputs when suspended
  * Add support for the headphone jack switch for both corgi and spitz
    (as switch SW_2)
Signed-off-by: default avatarRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 2bfc3c6e
Hide whitespace changes
Inline Side-by-side
Showing with 33 additions and 12 deletions
drivers/input/keyboard/corgikbd.c
View file @ 4872f788
......@@ -29,11 +29,11 @@
#define KB_COLS 12
#define KB_ROWMASK(r) (1 << (r))
#define SCANCODE(r,c) ( ((r)<<4) + (c) + 1 )
/* zero code, 124 scancodes + 3 hinge combinations */
#define NR_SCANCODES ( SCANCODE(KB_ROWS-1,KB_COLS-1) +1 +1 +3 )
#define SCAN_INTERVAL (HZ/10)
/* zero code, 124 scancodes */
#define NR_SCANCODES ( SCANCODE(KB_ROWS-1,KB_COLS-1) +1 +1 )
#define HINGE_SCAN_INTERVAL (HZ/4)
#define SCAN_INTERVAL (50) /* ms */
#define HINGE_SCAN_INTERVAL (250) /* ms */
#define CORGI_KEY_CALENDER KEY_F1
#define CORGI_KEY_ADDRESS KEY_F2
......@@ -49,9 +49,6 @@
#define CORGI_KEY_MAIL KEY_F10
#define CORGI_KEY_OK KEY_F11
#define CORGI_KEY_MENU KEY_F12
#define CORGI_HINGE_0 KEY_KP0
#define CORGI_HINGE_1 KEY_KP1
#define CORGI_HINGE_2 KEY_KP2
static unsigned char corgikbd_keycode[NR_SCANCODES] = {
0, /* 0 */
......@@ -63,7 +60,6 @@ static unsigned char corgikbd_keycode[NR_SCANCODES] = {
CORGI_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, 0, CORGI_KEY_FN, 0, 0, 0, 0, /* 81-96 */
KEY_SYSRQ, CORGI_KEY_JAP1, CORGI_KEY_JAP2, CORGI_KEY_CANCEL, CORGI_KEY_OK, CORGI_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0, /* 97-112 */
CORGI_KEY_OFF, CORGI_KEY_EXOK, CORGI_KEY_EXCANCEL, CORGI_KEY_EXJOGDOWN, CORGI_KEY_EXJOGUP, 0, 0, 0, 0, 0, 0, 0, /* 113-124 */
CORGI_HINGE_0, CORGI_HINGE_1, CORGI_HINGE_2 /* 125-127 */
};
......@@ -187,7 +183,7 @@ static void corgikbd_scankeyboard(struct corgikbd *corgikbd_data, struct pt_regs
/* if any keys are pressed, enable the timer */
if (num_pressed)
mod_timer(&corgikbd_data->timer, jiffies + SCAN_INTERVAL);
mod_timer(&corgikbd_data->timer, jiffies + msecs_to_jiffies(SCAN_INTERVAL));
spin_unlock_irqrestore(&corgikbd_data->lock, flags);
}
......@@ -228,6 +224,7 @@ static void corgikbd_timer_callback(unsigned long data)
* 0x0c - Keyboard and Screen Closed
*/
#define READ_GPIO_BIT(x) (GPLR(x) & GPIO_bit(x))
#define HINGE_STABLE_COUNT 2
static int sharpsl_hinge_state;
static int hinge_count;
......@@ -239,6 +236,7 @@ static void corgikbd_hinge_timer(unsigned long data)
unsigned long flags;
gprr = read_scoop_reg(&corgiscoop_device.dev, SCOOP_GPRR) & (CORGI_SCP_SWA | CORGI_SCP_SWB);
gprr |= (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0);
if (gprr != sharpsl_hinge_state) {
hinge_count = 0;
sharpsl_hinge_state = gprr;
......@@ -249,27 +247,38 @@ static void corgikbd_hinge_timer(unsigned long data)
input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
input_report_switch(corgikbd_data->input, SW_2, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
input_sync(corgikbd_data->input);
spin_unlock_irqrestore(&corgikbd_data->lock, flags);
}
}
mod_timer(&corgikbd_data->htimer, jiffies + HINGE_SCAN_INTERVAL);
mod_timer(&corgikbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
}
#ifdef CONFIG_PM
static int corgikbd_suspend(struct platform_device *dev, pm_message_t state)
{
int i;
struct corgikbd *corgikbd = platform_get_drvdata(dev);
corgikbd->suspended = 1;
/* strobe 0 is the power key so this can't be made an input for
powersaving therefore i = 1 */
for (i = 1; i < CORGI_KEY_STROBE_NUM; i++)
pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_IN);
return 0;
}
static int corgikbd_resume(struct platform_device *dev)
{
int i;
struct corgikbd *corgikbd = platform_get_drvdata(dev);
for (i = 1; i < CORGI_KEY_STROBE_NUM; i++)
pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH);
/* Upon resume, ignore the suspend key for a short while */
corgikbd->suspend_jiffies=jiffies;
corgikbd->suspended = 0;
......@@ -333,10 +342,11 @@ static int __init corgikbd_probe(struct platform_device *pdev)
clear_bit(0, input_dev->keybit);
set_bit(SW_0, input_dev->swbit);
set_bit(SW_1, input_dev->swbit);
set_bit(SW_2, input_dev->swbit);
input_register_device(corgikbd->input);
mod_timer(&corgikbd->htimer, jiffies + HINGE_SCAN_INTERVAL);
mod_timer(&corgikbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) {
......@@ -351,6 +361,9 @@ static int __init corgikbd_probe(struct platform_device *pdev)
for (i = 0; i < CORGI_KEY_STROBE_NUM; i++)
pxa_gpio_mode(CORGI_GPIO_KEY_STROBE(i) | GPIO_OUT | GPIO_DFLT_HIGH);
/* Setup the headphone jack as an input */
pxa_gpio_mode(CORGI_GPIO_AK_INT | GPIO_IN);
return 0;
}
......
drivers/input/keyboard/spitzkbd.c
View file @ 4872f788
......@@ -30,6 +30,7 @@
#define SCANCODE(r,c) (((r)<<4) + (c) + 1)
#define NR_SCANCODES ((KB_ROWS<<4) + 1)
#define SCAN_INTERVAL (50) /* ms */
#define HINGE_SCAN_INTERVAL (150) /* ms */
#define SPITZ_KEY_CALENDER KEY_F1
......@@ -230,7 +231,7 @@ static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data, struct pt_regs
/* if any keys are pressed, enable the timer */
if (num_pressed)
mod_timer(&spitzkbd_data->timer, jiffies + msecs_to_jiffies(100));
mod_timer(&spitzkbd_data->timer, jiffies + msecs_to_jiffies(SCAN_INTERVAL));
spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
}
......@@ -287,6 +288,7 @@ static void spitzkbd_hinge_timer(unsigned long data)
unsigned long flags;
state = GPLR(SPITZ_GPIO_SWA) & (GPIO_bit(SPITZ_GPIO_SWA)|GPIO_bit(SPITZ_GPIO_SWB));
state |= (GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT));
if (state != sharpsl_hinge_state) {
hinge_count = 0;
sharpsl_hinge_state = state;
......@@ -299,6 +301,7 @@ static void spitzkbd_hinge_timer(unsigned long data)
input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
input_report_switch(spitzkbd_data->input, SW_2, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
input_sync(spitzkbd_data->input);
spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
......@@ -397,6 +400,7 @@ static int __init spitzkbd_probe(struct platform_device *dev)
clear_bit(0, input_dev->keybit);
set_bit(SW_0, input_dev->swbit);
set_bit(SW_1, input_dev->swbit);
set_bit(SW_2, input_dev->swbit);
input_register_device(input_dev);
......@@ -432,6 +436,9 @@ static int __init spitzkbd_probe(struct platform_device *dev)
request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
"Spitzkbd SWB", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
"Spitzkbd HP", spitzkbd);
printk(KERN_INFO "input: Spitz Keyboard Registered\n");
......@@ -450,6 +457,7 @@ static int spitzkbd_remove(struct platform_device *dev)
free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd);
free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd);
free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd);
free_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd);
del_timer_sync(&spitzkbd->htimer);
del_timer_sync(&spitzkbd->timer);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7