Commit 48900a28 authored by Bart Van Assche's avatar Bart Van Assche Committed by Doug Ledford

IB/srp: Refactor srp_send_req()

This patch does not change any functionality but prepares for the patch
that adds RDMA_CM support by making the RDMA_CM patch much easier to
read.
Signed-off-by: default avatarBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
parent 85769c6f
......@@ -738,35 +738,21 @@ static int srp_send_req(struct srp_rdma_ch *ch, bool multich)
struct ib_cm_req_param param;
struct srp_login_req priv;
} *req = NULL;
char *ipi, *tpi;
int status;
u8 subnet_timeout;
subnet_timeout = srp_get_subnet_timeout(target->srp_host);
req = kzalloc(sizeof *req, GFP_KERNEL);
if (!req)
return -ENOMEM;
req->param.primary_path = &ch->path;
req->param.alternate_path = NULL;
req->param.service_id = target->service_id;
req->param.qp_num = ch->qp->qp_num;
req->param.qp_type = ch->qp->qp_type;
req->param.private_data = &req->priv;
req->param.private_data_len = sizeof req->priv;
req->param.flow_control = 1;
get_random_bytes(&req->param.starting_psn, 4);
req->param.starting_psn &= 0xffffff;
req->param.retry_count = target->tl_retry_count;
/*
* Pick some arbitrary defaults here; we could make these
* module parameters if anyone cared about setting them.
*/
req->param.responder_resources = 4;
req->param.remote_cm_response_timeout = subnet_timeout + 2;
req->param.local_cm_response_timeout = subnet_timeout + 2;
req->param.retry_count = target->tl_retry_count;
req->param.rnr_retry_count = 7;
req->param.max_cm_retries = 15;
......@@ -777,6 +763,28 @@ static int srp_send_req(struct srp_rdma_ch *ch, bool multich)
SRP_BUF_FORMAT_INDIRECT);
req->priv.req_flags = (multich ? SRP_MULTICHAN_MULTI :
SRP_MULTICHAN_SINGLE);
{
u8 subnet_timeout;
subnet_timeout = srp_get_subnet_timeout(target->srp_host);
req->param.primary_path = &ch->path;
req->param.alternate_path = NULL;
req->param.service_id = target->service_id;
get_random_bytes(&req->param.starting_psn, 4);
req->param.starting_psn &= 0xffffff;
req->param.qp_num = ch->qp->qp_num;
req->param.qp_type = ch->qp->qp_type;
req->param.local_cm_response_timeout = subnet_timeout + 2;
req->param.remote_cm_response_timeout = subnet_timeout + 2;
req->param.private_data = &req->priv;
req->param.private_data_len = sizeof(req->priv);
ipi = req->priv.initiator_port_id;
tpi = req->priv.target_port_id;
}
/*
* In the published SRP specification (draft rev. 16a), the
* port identifier format is 8 bytes of ID extension followed
......@@ -787,19 +795,15 @@ static int srp_send_req(struct srp_rdma_ch *ch, bool multich)
* recognized by the I/O Class they report.
*/
if (target->io_class == SRP_REV10_IB_IO_CLASS) {
memcpy(req->priv.initiator_port_id,
&target->sgid.global.interface_id, 8);
memcpy(req->priv.initiator_port_id + 8,
&target->initiator_ext, 8);
memcpy(req->priv.target_port_id, &target->ioc_guid, 8);
memcpy(req->priv.target_port_id + 8, &target->id_ext, 8);
memcpy(ipi, &target->sgid.global.interface_id, 8);
memcpy(ipi + 8, &target->initiator_ext, 8);
memcpy(tpi, &target->ioc_guid, 8);
memcpy(tpi + 8, &target->id_ext, 8);
} else {
memcpy(req->priv.initiator_port_id,
&target->initiator_ext, 8);
memcpy(req->priv.initiator_port_id + 8,
&target->sgid.global.interface_id, 8);
memcpy(req->priv.target_port_id, &target->id_ext, 8);
memcpy(req->priv.target_port_id + 8, &target->ioc_guid, 8);
memcpy(ipi, &target->initiator_ext, 8);
memcpy(ipi + 8, &target->sgid.global.interface_id, 8);
memcpy(tpi, &target->id_ext, 8);
memcpy(tpi + 8, &target->ioc_guid, 8);
}
/*
......@@ -812,9 +816,8 @@ static int srp_send_req(struct srp_rdma_ch *ch, bool multich)
PFX "Topspin/Cisco initiator port ID workaround "
"activated for target GUID %016llx\n",
be64_to_cpu(target->ioc_guid));
memset(req->priv.initiator_port_id, 0, 8);
memcpy(req->priv.initiator_port_id + 8,
&target->srp_host->srp_dev->dev->node_guid, 8);
memset(ipi, 0, 8);
memcpy(ipi + 8, &target->srp_host->srp_dev->dev->node_guid, 8);
}
status = ib_send_cm_req(ch->cm_id, &req->param);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment