Commit 48b41c5e authored by Benjamin Gaignard's avatar Benjamin Gaignard Committed by Lee Jones

clocksource: Add Low Power STM32 timers driver

Implement clock event driver using low power STM32 timers.
Low power timer counters running even when CPUs are stopped.
It could be used as clock event broadcaster to wake up CPUs but not like
a clocksource because each it rise an interrupt the counter restart from 0.

Low power timers have a 16 bits counter and a prescaler which allow to
divide the clock per power of 2 to up 128 to target a 32KHz rate.
Signed-off-by: default avatarBenjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: default avatarPascal Paillet <p.paillet@st.com>
Acked-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 45d93065
......@@ -291,6 +291,10 @@ config CLKSRC_STM32
select CLKSRC_MMIO
select TIMER_OF
config CLKSRC_STM32_LP
bool "Low power clocksource for STM32 SoCs"
depends on MFD_STM32_LPTIMER || COMPILE_TEST
config CLKSRC_MPS2
bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
depends on GENERIC_SCHED_CLOCK
......
......@@ -45,6 +45,7 @@ obj-$(CONFIG_BCM_KONA_TIMER) += bcm_kona_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += timer-cadence-ttc.o
obj-$(CONFIG_CLKSRC_EFM32) += timer-efm32.o
obj-$(CONFIG_CLKSRC_STM32) += timer-stm32.o
obj-$(CONFIG_CLKSRC_STM32_LP) += timer-stm32-lp.o
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_LPC32XX) += timer-lpc32xx.o
obj-$(CONFIG_CLKSRC_MPS2) += mps2-timer.o
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
* Authors: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
* Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
*/
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/mfd/stm32-lptimer.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/pm_wakeirq.h>
#define CFGR_PSC_OFFSET 9
#define STM32_LP_RATING 1000
#define STM32_TARGET_CLKRATE (32000 * HZ)
#define STM32_LP_MAX_PSC 7
struct stm32_lp_private {
struct regmap *reg;
struct clock_event_device clkevt;
unsigned long period;
struct device *dev;
};
static struct stm32_lp_private*
to_priv(struct clock_event_device *clkevt)
{
return container_of(clkevt, struct stm32_lp_private, clkevt);
}
static int stm32_clkevent_lp_shutdown(struct clock_event_device *clkevt)
{
struct stm32_lp_private *priv = to_priv(clkevt);
regmap_write(priv->reg, STM32_LPTIM_CR, 0);
regmap_write(priv->reg, STM32_LPTIM_IER, 0);
/* clear pending flags */
regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
return 0;
}
static int stm32_clkevent_lp_set_timer(unsigned long evt,
struct clock_event_device *clkevt,
int is_periodic)
{
struct stm32_lp_private *priv = to_priv(clkevt);
/* disable LPTIMER to be able to write into IER register*/
regmap_write(priv->reg, STM32_LPTIM_CR, 0);
/* enable ARR interrupt */
regmap_write(priv->reg, STM32_LPTIM_IER, STM32_LPTIM_ARRMIE);
/* enable LPTIMER to be able to write into ARR register */
regmap_write(priv->reg, STM32_LPTIM_CR, STM32_LPTIM_ENABLE);
/* set next event counter */
regmap_write(priv->reg, STM32_LPTIM_ARR, evt);
/* start counter */
if (is_periodic)
regmap_write(priv->reg, STM32_LPTIM_CR,
STM32_LPTIM_CNTSTRT | STM32_LPTIM_ENABLE);
else
regmap_write(priv->reg, STM32_LPTIM_CR,
STM32_LPTIM_SNGSTRT | STM32_LPTIM_ENABLE);
return 0;
}
static int stm32_clkevent_lp_set_next_event(unsigned long evt,
struct clock_event_device *clkevt)
{
return stm32_clkevent_lp_set_timer(evt, clkevt,
clockevent_state_periodic(clkevt));
}
static int stm32_clkevent_lp_set_periodic(struct clock_event_device *clkevt)
{
struct stm32_lp_private *priv = to_priv(clkevt);
return stm32_clkevent_lp_set_timer(priv->period, clkevt, true);
}
static int stm32_clkevent_lp_set_oneshot(struct clock_event_device *clkevt)
{
struct stm32_lp_private *priv = to_priv(clkevt);
return stm32_clkevent_lp_set_timer(priv->period, clkevt, false);
}
static irqreturn_t stm32_clkevent_lp_irq_handler(int irq, void *dev_id)
{
struct clock_event_device *clkevt = (struct clock_event_device *)dev_id;
struct stm32_lp_private *priv = to_priv(clkevt);
regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
if (clkevt->event_handler)
clkevt->event_handler(clkevt);
return IRQ_HANDLED;
}
static void stm32_clkevent_lp_set_prescaler(struct stm32_lp_private *priv,
unsigned long *rate)
{
int i;
for (i = 0; i <= STM32_LP_MAX_PSC; i++) {
if (DIV_ROUND_CLOSEST(*rate, 1 << i) < STM32_TARGET_CLKRATE)
break;
}
regmap_write(priv->reg, STM32_LPTIM_CFGR, i << CFGR_PSC_OFFSET);
/* Adjust rate and period given the prescaler value */
*rate = DIV_ROUND_CLOSEST(*rate, (1 << i));
priv->period = DIV_ROUND_UP(*rate, HZ);
}
static void stm32_clkevent_lp_init(struct stm32_lp_private *priv,
struct device_node *np, unsigned long rate)
{
priv->clkevt.name = np->full_name;
priv->clkevt.cpumask = cpu_possible_mask;
priv->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT;
priv->clkevt.set_state_shutdown = stm32_clkevent_lp_shutdown;
priv->clkevt.set_state_periodic = stm32_clkevent_lp_set_periodic;
priv->clkevt.set_state_oneshot = stm32_clkevent_lp_set_oneshot;
priv->clkevt.set_next_event = stm32_clkevent_lp_set_next_event;
priv->clkevt.rating = STM32_LP_RATING;
clockevents_config_and_register(&priv->clkevt, rate, 0x1,
STM32_LPTIM_MAX_ARR);
}
static int stm32_clkevent_lp_probe(struct platform_device *pdev)
{
struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
struct stm32_lp_private *priv;
unsigned long rate;
int ret, irq;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->reg = ddata->regmap;
ret = clk_prepare_enable(ddata->clk);
if (ret)
return -EINVAL;
rate = clk_get_rate(ddata->clk);
if (!rate) {
ret = -EINVAL;
goto out_clk_disable;
}
irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
if (irq <= 0) {
ret = irq;
goto out_clk_disable;
}
if (of_property_read_bool(pdev->dev.parent->of_node, "wakeup-source")) {
ret = device_init_wakeup(&pdev->dev, true);
if (ret)
goto out_clk_disable;
ret = dev_pm_set_wake_irq(&pdev->dev, irq);
if (ret)
goto out_clk_disable;
}
ret = devm_request_irq(&pdev->dev, irq, stm32_clkevent_lp_irq_handler,
IRQF_TIMER, pdev->name, &priv->clkevt);
if (ret)
goto out_clk_disable;
stm32_clkevent_lp_set_prescaler(priv, &rate);
stm32_clkevent_lp_init(priv, pdev->dev.parent->of_node, rate);
priv->dev = &pdev->dev;
return 0;
out_clk_disable:
clk_disable_unprepare(ddata->clk);
return ret;
}
static int stm32_clkevent_lp_remove(struct platform_device *pdev)
{
return -EBUSY; /* cannot unregister clockevent */
}
static const struct of_device_id stm32_clkevent_lp_of_match[] = {
{ .compatible = "st,stm32-lptimer-timer", },
{},
};
MODULE_DEVICE_TABLE(of, stm32_clkevent_lp_of_match);
static struct platform_driver stm32_clkevent_lp_driver = {
.probe = stm32_clkevent_lp_probe,
.remove = stm32_clkevent_lp_remove,
.driver = {
.name = "stm32-lptimer-timer",
.of_match_table = of_match_ptr(stm32_clkevent_lp_of_match),
},
};
module_platform_driver(stm32_clkevent_lp_driver);
MODULE_ALIAS("platform:stm32-lptimer-timer");
MODULE_DESCRIPTION("STMicroelectronics STM32 clockevent low power driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment