Commit 48e08d0f authored by Andy Lutomirski's avatar Andy Lutomirski

x86, entry: Switch stacks on a paranoid entry from userspace

This causes all non-NMI, non-double-fault kernel entries from
userspace to run on the normal kernel stack.  Double-fault is
exempt to minimize confusion if we double-fault directly from
userspace due to a bad kernel stack.

This is, suprisingly, simpler and shorter than the current code.  It
removes the IMO rather frightening paranoid_userspace path, and it
make sync_regs much simpler.

There is no risk of stack overflow due to this change -- the kernel
stack that we switch to is empty.

This will also enable us to create non-atomic sections within
machine checks from userspace, which will simplify memory failure
handling.  It will also allow the upcoming fsgsbase code to be
simplified, because it doesn't need to worry about usergs when
scheduling in paranoid_exit, as that code no longer exists.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: default avatarBorislav Petkov <bp@alien8.de>
Signed-off-by: default avatarAndy Lutomirski <luto@amacapital.net>
parent 734d1680
...@@ -78,9 +78,6 @@ The expensive (paranoid) way is to read back the MSR_GS_BASE value ...@@ -78,9 +78,6 @@ The expensive (paranoid) way is to read back the MSR_GS_BASE value
xorl %ebx,%ebx xorl %ebx,%ebx
1: ret 1: ret
and the whole paranoid non-paranoid macro complexity is about whether
to suffer that RDMSR cost.
If we are at an interrupt or user-trap/gate-alike boundary then we can If we are at an interrupt or user-trap/gate-alike boundary then we can
use the faster check: the stack will be a reliable indicator of use the faster check: the stack will be a reliable indicator of
whether SWAPGS was already done: if we see that we are a secondary whether SWAPGS was already done: if we see that we are a secondary
...@@ -93,6 +90,15 @@ which might have triggered right after a normal entry wrote CS to the ...@@ -93,6 +90,15 @@ which might have triggered right after a normal entry wrote CS to the
stack but before we executed SWAPGS, then the only safe way to check stack but before we executed SWAPGS, then the only safe way to check
for GS is the slower method: the RDMSR. for GS is the slower method: the RDMSR.
So we try only to mark those entry methods 'paranoid' that absolutely Therefore, super-atomic entries (except NMI, which is handled separately)
need the more expensive check for the GS base - and we generate all must use idtentry with paranoid=1 to handle gsbase correctly. This
'normal' entry points with the regular (faster) entry macros. triggers three main behavior changes:
- Interrupt entry will use the slower gsbase check.
- Interrupt entry from user mode will switch off the IST stack.
- Interrupt exit to kernel mode will not attempt to reschedule.
We try to only use IST entries and the paranoid entry code for vectors
that absolutely need the more expensive check for the GS base - and we
generate all 'normal' entry points with the regular (faster) paranoid=0
variant.
...@@ -40,9 +40,11 @@ An IST is selected by a non-zero value in the IST field of an ...@@ -40,9 +40,11 @@ An IST is selected by a non-zero value in the IST field of an
interrupt-gate descriptor. When an interrupt occurs and the hardware interrupt-gate descriptor. When an interrupt occurs and the hardware
loads such a descriptor, the hardware automatically sets the new stack loads such a descriptor, the hardware automatically sets the new stack
pointer based on the IST value, then invokes the interrupt handler. If pointer based on the IST value, then invokes the interrupt handler. If
software wants to allow nested IST interrupts then the handler must the interrupt came from user mode, then the interrupt handler prologue
adjust the IST values on entry to and exit from the interrupt handler. will switch back to the per-thread stack. If software wants to allow
(This is occasionally done, e.g. for debug exceptions.) nested IST interrupts then the handler must adjust the IST values on
entry to and exit from the interrupt handler. (This is occasionally
done, e.g. for debug exceptions.)
Events with different IST codes (i.e. with different stacks) can be Events with different IST codes (i.e. with different stacks) can be
nested. For example, a debug interrupt can safely be interrupted by an nested. For example, a debug interrupt can safely be interrupted by an
......
...@@ -1048,6 +1048,11 @@ ENTRY(\sym) ...@@ -1048,6 +1048,11 @@ ENTRY(\sym)
CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
.if \paranoid .if \paranoid
.if \paranoid == 1
CFI_REMEMBER_STATE
testl $3, CS(%rsp) /* If coming from userspace, switch */
jnz 1f /* stacks. */
.endif
call save_paranoid call save_paranoid
.else .else
call error_entry call error_entry
...@@ -1088,6 +1093,36 @@ ENTRY(\sym) ...@@ -1088,6 +1093,36 @@ ENTRY(\sym)
jmp error_exit /* %ebx: no swapgs flag */ jmp error_exit /* %ebx: no swapgs flag */
.endif .endif
.if \paranoid == 1
CFI_RESTORE_STATE
/*
* Paranoid entry from userspace. Switch stacks and treat it
* as a normal entry. This means that paranoid handlers
* run in real process context if user_mode(regs).
*/
1:
call error_entry
DEFAULT_FRAME 0
movq %rsp,%rdi /* pt_regs pointer */
call sync_regs
movq %rax,%rsp /* switch stack */
movq %rsp,%rdi /* pt_regs pointer */
.if \has_error_code
movq ORIG_RAX(%rsp),%rsi /* get error code */
movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */
.else
xorl %esi,%esi /* no error code */
.endif
call \do_sym
jmp error_exit /* %ebx: no swapgs flag */
.endif
CFI_ENDPROC CFI_ENDPROC
END(\sym) END(\sym)
.endm .endm
...@@ -1108,7 +1143,7 @@ idtentry overflow do_overflow has_error_code=0 ...@@ -1108,7 +1143,7 @@ idtentry overflow do_overflow has_error_code=0
idtentry bounds do_bounds has_error_code=0 idtentry bounds do_bounds has_error_code=0
idtentry invalid_op do_invalid_op has_error_code=0 idtentry invalid_op do_invalid_op has_error_code=0
idtentry device_not_available do_device_not_available has_error_code=0 idtentry device_not_available do_device_not_available has_error_code=0
idtentry double_fault do_double_fault has_error_code=1 paranoid=1 idtentry double_fault do_double_fault has_error_code=1 paranoid=2
idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0 idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0
idtentry invalid_TSS do_invalid_TSS has_error_code=1 idtentry invalid_TSS do_invalid_TSS has_error_code=1
idtentry segment_not_present do_segment_not_present has_error_code=1 idtentry segment_not_present do_segment_not_present has_error_code=1
...@@ -1289,16 +1324,14 @@ idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector( ...@@ -1289,16 +1324,14 @@ idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(
#endif #endif
/* /*
* "Paranoid" exit path from exception stack. * "Paranoid" exit path from exception stack. This is invoked
* Paranoid because this is used by NMIs and cannot take * only on return from non-NMI IST interrupts that came
* any kernel state for granted. * from kernel space.
* We don't do kernel preemption checks here, because only
* NMI should be common and it does not enable IRQs and
* cannot get reschedule ticks.
* *
* "trace" is 0 for the NMI handler only, because irq-tracing * We may be returning to very strange contexts (e.g. very early
* is fundamentally NMI-unsafe. (we cannot change the soft and * in syscall entry), so checking for preemption here would
* hard flags at once, atomically) * be complicated. Fortunately, we there's no good reason
* to try to handle preemption here.
*/ */
/* ebx: no swapgs flag */ /* ebx: no swapgs flag */
...@@ -1308,43 +1341,14 @@ ENTRY(paranoid_exit) ...@@ -1308,43 +1341,14 @@ ENTRY(paranoid_exit)
TRACE_IRQS_OFF_DEBUG TRACE_IRQS_OFF_DEBUG
testl %ebx,%ebx /* swapgs needed? */ testl %ebx,%ebx /* swapgs needed? */
jnz paranoid_restore jnz paranoid_restore
testl $3,CS(%rsp)
jnz paranoid_userspace
paranoid_swapgs:
TRACE_IRQS_IRETQ 0 TRACE_IRQS_IRETQ 0
SWAPGS_UNSAFE_STACK SWAPGS_UNSAFE_STACK
RESTORE_ALL 8 RESTORE_ALL 8
jmp irq_return INTERRUPT_RETURN
paranoid_restore: paranoid_restore:
TRACE_IRQS_IRETQ_DEBUG 0 TRACE_IRQS_IRETQ_DEBUG 0
RESTORE_ALL 8 RESTORE_ALL 8
jmp irq_return INTERRUPT_RETURN
paranoid_userspace:
GET_THREAD_INFO(%rcx)
movl TI_flags(%rcx),%ebx
andl $_TIF_WORK_MASK,%ebx
jz paranoid_swapgs
movq %rsp,%rdi /* &pt_regs */
call sync_regs
movq %rax,%rsp /* switch stack for scheduling */
testl $_TIF_NEED_RESCHED,%ebx
jnz paranoid_schedule
movl %ebx,%edx /* arg3: thread flags */
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
xorl %esi,%esi /* arg2: oldset */
movq %rsp,%rdi /* arg1: &pt_regs */
call do_notify_resume
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
jmp paranoid_userspace
paranoid_schedule:
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_ANY)
SCHEDULE_USER
DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_OFF
jmp paranoid_userspace
CFI_ENDPROC CFI_ENDPROC
END(paranoid_exit) END(paranoid_exit)
......
...@@ -466,27 +466,14 @@ NOKPROBE_SYMBOL(do_int3); ...@@ -466,27 +466,14 @@ NOKPROBE_SYMBOL(do_int3);
#ifdef CONFIG_X86_64 #ifdef CONFIG_X86_64
/* /*
* Help handler running on IST stack to switch back to user stack * Help handler running on IST stack to switch off the IST stack if the
* for scheduling or signal handling. The actual stack switch is done in * interrupted code was in user mode. The actual stack switch is done in
* entry.S * entry_64.S
*/ */
asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs) asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs)
{ {
struct pt_regs *regs = eregs; struct pt_regs *regs = task_pt_regs(current);
/* Did already sync */ *regs = *eregs;
if (eregs == (struct pt_regs *)eregs->sp)
;
/* Exception from user space */
else if (user_mode(eregs))
regs = task_pt_regs(current);
/*
* Exception from kernel and interrupts are enabled. Move to
* kernel process stack.
*/
else if (eregs->flags & X86_EFLAGS_IF)
regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
if (eregs != regs)
*regs = *eregs;
return regs; return regs;
} }
NOKPROBE_SYMBOL(sync_regs); NOKPROBE_SYMBOL(sync_regs);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment