Commit 49427232 authored by Marek Vasut's avatar Marek Vasut Committed by Linus Walleij

gpio: pca953x: Perform basic regmap conversion

Convert the driver to use regmap to access the chips. Due to the convoluted
register mapping scheme, implement read/write/volatile check functions that
untangle the mess and perform check accordingly. This patch does not zap the
internal register cache of the PCA953x driver, nor does it push the regmap
access down into the gpiochip accessors to simplify the review. All that is
in subsequent patches.
Signed-off-by: default avatarMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent b32cecb4
...@@ -20,6 +20,7 @@ ...@@ -20,6 +20,7 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include <linux/platform_data/pca953x.h> #include <linux/platform_data/pca953x.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h> #include <linux/regulator/consumer.h>
#include <linux/slab.h> #include <linux/slab.h>
...@@ -30,6 +31,8 @@ ...@@ -30,6 +31,8 @@
#define PCA953X_INVERT 0x02 #define PCA953X_INVERT 0x02
#define PCA953X_DIRECTION 0x03 #define PCA953X_DIRECTION 0x03
#define REG_ADDR_MASK 0x3f
#define REG_ADDR_EXT 0x40
#define REG_ADDR_AI 0x80 #define REG_ADDR_AI 0x80
#define PCA957X_IN 0x00 #define PCA957X_IN 0x00
...@@ -141,6 +144,7 @@ struct pca953x_chip { ...@@ -141,6 +144,7 @@ struct pca953x_chip {
u8 reg_output[MAX_BANK]; u8 reg_output[MAX_BANK];
u8 reg_direction[MAX_BANK]; u8 reg_direction[MAX_BANK];
struct mutex i2c_lock; struct mutex i2c_lock;
struct regmap *regmap;
#ifdef CONFIG_GPIO_PCA953X_IRQ #ifdef CONFIG_GPIO_PCA953X_IRQ
struct mutex irq_lock; struct mutex irq_lock;
...@@ -164,6 +168,141 @@ static int pca953x_bank_shift(struct pca953x_chip *chip) ...@@ -164,6 +168,141 @@ static int pca953x_bank_shift(struct pca953x_chip *chip)
return fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); return fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
} }
#define PCA953x_BANK_INPUT BIT(0)
#define PCA953x_BANK_OUTPUT BIT(1)
#define PCA953x_BANK_POLARITY BIT(2)
#define PCA953x_BANK_CONFIG BIT(3)
#define PCA957x_BANK_INPUT BIT(0)
#define PCA957x_BANK_POLARITY BIT(1)
#define PCA957x_BANK_BUSHOLD BIT(2)
#define PCA957x_BANK_CONFIG BIT(4)
#define PCA957x_BANK_OUTPUT BIT(5)
#define PCAL9xxx_BANK_IN_LATCH BIT(8 + 2)
#define PCAL9xxx_BANK_IRQ_MASK BIT(8 + 5)
#define PCAL9xxx_BANK_IRQ_STAT BIT(8 + 6)
/*
* We care about the following registers:
* - Standard set, below 0x40, each port can be replicated up to 8 times
* - PCA953x standard
* Input port 0x00 + 0 * bank_size R
* Output port 0x00 + 1 * bank_size RW
* Polarity Inversion port 0x00 + 2 * bank_size RW
* Configuration port 0x00 + 3 * bank_size RW
* - PCA957x with mixed up registers
* Input port 0x00 + 0 * bank_size R
* Polarity Inversion port 0x00 + 1 * bank_size RW
* Bus hold port 0x00 + 2 * bank_size RW
* Configuration port 0x00 + 4 * bank_size RW
* Output port 0x00 + 5 * bank_size RW
*
* - Extended set, above 0x40, often chip specific.
* - PCAL6524/PCAL9555A with custom PCAL IRQ handling:
* Input latch register 0x40 + 2 * bank_size RW
* Interrupt mask register 0x40 + 5 * bank_size RW
* Interrupt status register 0x40 + 6 * bank_size R
*
* - Registers with bit 0x80 set, the AI bit
* The bit is cleared and the registers fall into one of the
* categories above.
*/
static bool pca953x_check_register(struct pca953x_chip *chip, unsigned int reg,
u32 checkbank)
{
int bank_shift = pca953x_bank_shift(chip);
int bank = (reg & REG_ADDR_MASK) >> bank_shift;
int offset = reg & (BIT(bank_shift) - 1);
/* Special PCAL extended register check. */
if (reg & REG_ADDR_EXT) {
if (!(chip->driver_data & PCA_PCAL))
return false;
bank += 8;
}
/* Register is not in the matching bank. */
if (!(BIT(bank) & checkbank))
return false;
/* Register is not within allowed range of bank. */
if (offset >= NBANK(chip))
return false;
return true;
}
static bool pca953x_readable_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
bank = PCA953x_BANK_INPUT | PCA953x_BANK_OUTPUT |
PCA953x_BANK_POLARITY | PCA953x_BANK_CONFIG;
} else {
bank = PCA957x_BANK_INPUT | PCA957x_BANK_OUTPUT |
PCA957x_BANK_POLARITY | PCA957x_BANK_CONFIG |
PCA957x_BANK_BUSHOLD;
}
if (chip->driver_data & PCA_PCAL) {
bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_IRQ_MASK |
PCAL9xxx_BANK_IRQ_STAT;
}
return pca953x_check_register(chip, reg, bank);
}
static bool pca953x_writeable_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE) {
bank = PCA953x_BANK_OUTPUT | PCA953x_BANK_POLARITY |
PCA953x_BANK_CONFIG;
} else {
bank = PCA957x_BANK_OUTPUT | PCA957x_BANK_POLARITY |
PCA957x_BANK_CONFIG | PCA957x_BANK_BUSHOLD;
}
if (chip->driver_data & PCA_PCAL)
bank |= PCAL9xxx_BANK_IN_LATCH | PCAL9xxx_BANK_IRQ_MASK;
return pca953x_check_register(chip, reg, bank);
}
static bool pca953x_volatile_register(struct device *dev, unsigned int reg)
{
struct pca953x_chip *chip = dev_get_drvdata(dev);
u32 bank;
if (PCA_CHIP_TYPE(chip->driver_data) == PCA953X_TYPE)
bank = PCA953x_BANK_INPUT;
else
bank = PCA957x_BANK_INPUT;
if (chip->driver_data & PCA_PCAL)
bank |= PCAL9xxx_BANK_IRQ_STAT;
return pca953x_check_register(chip, reg, bank);
}
const struct regmap_config pca953x_i2c_regmap = {
.reg_bits = 8,
.val_bits = 8,
.readable_reg = pca953x_readable_register,
.writeable_reg = pca953x_writeable_register,
.volatile_reg = pca953x_volatile_register,
.cache_type = REGCACHE_RBTREE,
.max_register = 0x7f,
};
static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off, static u8 pca953x_recalc_addr(struct pca953x_chip *chip, int reg, int off,
bool write, bool addrinc) bool write, bool addrinc)
{ {
...@@ -193,8 +332,7 @@ static int pca953x_read_single(struct pca953x_chip *chip, int reg, u32 *val, ...@@ -193,8 +332,7 @@ static int pca953x_read_single(struct pca953x_chip *chip, int reg, u32 *val,
u8 regaddr = pca953x_recalc_addr(chip, reg, off, false, false); u8 regaddr = pca953x_recalc_addr(chip, reg, off, false, false);
int ret; int ret;
ret = i2c_smbus_read_byte_data(chip->client, regaddr); ret = regmap_read(chip->regmap, regaddr, val);
*val = ret;
if (ret < 0) { if (ret < 0) {
dev_err(&chip->client->dev, "failed reading register\n"); dev_err(&chip->client->dev, "failed reading register\n");
return ret; return ret;
...@@ -209,7 +347,7 @@ static int pca953x_write_single(struct pca953x_chip *chip, int reg, u32 val, ...@@ -209,7 +347,7 @@ static int pca953x_write_single(struct pca953x_chip *chip, int reg, u32 val,
u8 regaddr = pca953x_recalc_addr(chip, reg, off, true, false); u8 regaddr = pca953x_recalc_addr(chip, reg, off, true, false);
int ret; int ret;
ret = i2c_smbus_write_byte_data(chip->client, regaddr, val); ret = regmap_write(chip->regmap, regaddr, val);
if (ret < 0) { if (ret < 0) {
dev_err(&chip->client->dev, "failed writing register\n"); dev_err(&chip->client->dev, "failed writing register\n");
return ret; return ret;
...@@ -223,8 +361,7 @@ static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val) ...@@ -223,8 +361,7 @@ static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val)
u8 regaddr = pca953x_recalc_addr(chip, reg, 0, true, true); u8 regaddr = pca953x_recalc_addr(chip, reg, 0, true, true);
int ret; int ret;
ret = i2c_smbus_write_i2c_block_data(chip->client, regaddr, ret = regmap_bulk_write(chip->regmap, regaddr, val, NBANK(chip));
NBANK(chip), val);
if (ret < 0) { if (ret < 0) {
dev_err(&chip->client->dev, "failed writing register\n"); dev_err(&chip->client->dev, "failed writing register\n");
return ret; return ret;
...@@ -238,8 +375,7 @@ static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val) ...@@ -238,8 +375,7 @@ static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val)
u8 regaddr = pca953x_recalc_addr(chip, reg, 0, false, true); u8 regaddr = pca953x_recalc_addr(chip, reg, 0, false, true);
int ret; int ret;
ret = i2c_smbus_read_i2c_block_data(chip->client, regaddr, ret = regmap_bulk_read(chip->regmap, regaddr, val, NBANK(chip));
NBANK(chip), val);
if (ret < 0) { if (ret < 0) {
dev_err(&chip->client->dev, "failed reading register\n"); dev_err(&chip->client->dev, "failed reading register\n");
return ret; return ret;
...@@ -793,6 +929,14 @@ static int pca953x_probe(struct i2c_client *client, ...@@ -793,6 +929,14 @@ static int pca953x_probe(struct i2c_client *client,
} }
} }
i2c_set_clientdata(client, chip);
chip->regmap = devm_regmap_init_i2c(client, &pca953x_i2c_regmap);
if (IS_ERR(chip->regmap)) {
ret = PTR_ERR(chip->regmap);
goto err_exit;
}
mutex_init(&chip->i2c_lock); mutex_init(&chip->i2c_lock);
/* /*
* In case we have an i2c-mux controlled by a GPIO provided by an * In case we have an i2c-mux controlled by a GPIO provided by an
...@@ -843,7 +987,6 @@ static int pca953x_probe(struct i2c_client *client, ...@@ -843,7 +987,6 @@ static int pca953x_probe(struct i2c_client *client,
dev_warn(&client->dev, "setup failed, %d\n", ret); dev_warn(&client->dev, "setup failed, %d\n", ret);
} }
i2c_set_clientdata(client, chip);
return 0; return 0;
err_exit: err_exit:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment