bus: mhi: ep: Add support for processing channel rings

Add support for processing the channel rings from host. For the channel
ring associated with DL channel, the xfer callback will simply invoked.
For the case of UL channel, the ring elements will be read in a buffer
till the write pointer and later passed to the client driver using the
xfer callback.

The client drivers should provide the callbacks for both UL and DL
channels during registration.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

drivers/bus/mhi/ep/main.c

@@ -383,6 +383,57 @@ static int mhi_ep_read_channel(struct mhi_ep_cntrl *mhi_cntrl,
 	return 0;
 }
 
+static int mhi_ep_process_ch_ring(struct mhi_ep_ring *ring, struct mhi_ring_element *el)
+{
+	struct mhi_ep_cntrl *mhi_cntrl = ring->mhi_cntrl;
+	struct mhi_result result = {};
+	u32 len = MHI_EP_DEFAULT_MTU;
+	struct mhi_ep_chan *mhi_chan;
+	int ret;
+
+	mhi_chan = &mhi_cntrl->mhi_chan[ring->ch_id];
+
+	/*
+	 * Bail out if transfer callback is not registered for the channel.
+	 * This is most likely due to the client driver not loaded at this point.
+	 */
+	if (!mhi_chan->xfer_cb) {
+		dev_err(&mhi_chan->mhi_dev->dev, "Client driver not available\n");
+		return -ENODEV;
+	}
+
+	if (ring->ch_id % 2) {
+		/* DL channel */
+		result.dir = mhi_chan->dir;
+		mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+	} else {
+		/* UL channel */
+		result.buf_addr = kzalloc(len, GFP_KERNEL);
+		if (!result.buf_addr)
+			return -ENOMEM;
+
+		do {
+			ret = mhi_ep_read_channel(mhi_cntrl, ring, &result, len);
+			if (ret < 0) {
+				dev_err(&mhi_chan->mhi_dev->dev, "Failed to read channel\n");
+				kfree(result.buf_addr);
+				return ret;
+			}
+
+			result.dir = mhi_chan->dir;
+			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+			result.bytes_xferd = 0;
+			memset(result.buf_addr, 0, len);
+
+			/* Read until the ring becomes empty */
+		} while (!mhi_ep_queue_is_empty(mhi_chan->mhi_dev, DMA_TO_DEVICE));
+
+		kfree(result.buf_addr);
+	}
+
+	return 0;
+}
+
 static int mhi_ep_cache_host_cfg(struct mhi_ep_cntrl *mhi_cntrl)
 {
 	size_t cmd_ctx_host_size, ch_ctx_host_size, ev_ctx_host_size;
@@ -565,6 +616,60 @@ static void mhi_ep_cmd_ring_worker(struct work_struct *work)
 	}
 }
 
+static void mhi_ep_ch_ring_worker(struct work_struct *work)
+{
+	struct mhi_ep_cntrl *mhi_cntrl = container_of(work, struct mhi_ep_cntrl, ch_ring_work);
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	struct mhi_ep_ring_item *itr, *tmp;
+	struct mhi_ring_element *el;
+	struct mhi_ep_ring *ring;
+	struct mhi_ep_chan *chan;
+	unsigned long flags;
+	LIST_HEAD(head);
+	int ret;
+
+	spin_lock_irqsave(&mhi_cntrl->list_lock, flags);
+	list_splice_tail_init(&mhi_cntrl->ch_db_list, &head);
+	spin_unlock_irqrestore(&mhi_cntrl->list_lock, flags);
+
+	/* Process each queued channel ring. In case of an error, just process next element. */
+	list_for_each_entry_safe(itr, tmp, &head, node) {
+		list_del(&itr->node);
+		ring = itr->ring;
+
+		/* Update the write offset for the ring */
+		ret = mhi_ep_update_wr_offset(ring);
+		if (ret) {
+			dev_err(dev, "Error updating write offset for ring\n");
+			kfree(itr);
+			continue;
+		}
+
+		/* Sanity check to make sure there are elements in the ring */
+		if (ring->rd_offset == ring->wr_offset) {
+			kfree(itr);
+			continue;
+		}
+
+		el = &ring->ring_cache[ring->rd_offset];
+		chan = &mhi_cntrl->mhi_chan[ring->ch_id];
+
+		mutex_lock(&chan->lock);
+		dev_dbg(dev, "Processing the ring for channel (%u)\n", ring->ch_id);
+		ret = mhi_ep_process_ch_ring(ring, el);
+		if (ret) {
+			dev_err(dev, "Error processing ring for channel (%u): %d\n",
+				ring->ch_id, ret);
+			mutex_unlock(&chan->lock);
+			kfree(itr);
+			continue;
+		}
+
+		mutex_unlock(&chan->lock);
+		kfree(itr);
+	}
+}
+
 static void mhi_ep_state_worker(struct work_struct *work)
 {
 	struct mhi_ep_cntrl *mhi_cntrl = container_of(work, struct mhi_ep_cntrl, state_work);
@@ -630,6 +735,8 @@ static void mhi_ep_queue_channel_db(struct mhi_ep_cntrl *mhi_cntrl, unsigned lon
 		spin_lock(&mhi_cntrl->list_lock);
 		list_splice_tail_init(&head, &mhi_cntrl->ch_db_list);
 		spin_unlock(&mhi_cntrl->list_lock);
+
+		queue_work(mhi_cntrl->wq, &mhi_cntrl->ch_ring_work);
 	}
 }
 
@@ -1120,6 +1227,7 @@ int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl,
 	INIT_WORK(&mhi_cntrl->state_work, mhi_ep_state_worker);
 	INIT_WORK(&mhi_cntrl->reset_work, mhi_ep_reset_worker);
 	INIT_WORK(&mhi_cntrl->cmd_ring_work, mhi_ep_cmd_ring_worker);
+	INIT_WORK(&mhi_cntrl->ch_ring_work, mhi_ep_ch_ring_worker);
 
 	mhi_cntrl->wq = alloc_workqueue("mhi_ep_wq", 0, 0);
 	if (!mhi_cntrl->wq) {

include/linux/mhi_ep.h

@@ -78,6 +78,7 @@ struct mhi_ep_db_info {
  * @state_work: State transition worker
  * @reset_work: Worker for MHI Endpoint reset
  * @cmd_ring_work: Worker for processing command rings
+ * @ch_ring_work: Worker for processing channel rings
  * @raise_irq: CB function for raising IRQ to the host
  * @alloc_map: CB function for allocating memory in endpoint for storing host context and mapping it
  * @unmap_free: CB function to unmap and free the allocated memory in endpoint for storing host context
@@ -126,6 +127,7 @@ struct mhi_ep_cntrl {
 	struct work_struct state_work;
 	struct work_struct reset_work;
 	struct work_struct cmd_ring_work;
+	struct work_struct ch_ring_work;
 
 	void (*raise_irq)(struct mhi_ep_cntrl *mhi_cntrl, u32 vector);
 	int (*alloc_map)(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t *phys_ptr,