net: encx24j600: Correct spelling in comments

Correct spelling in comments, as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-3-f0480542e39f@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/microchip/encx24j600-regmap.c

@@ -75,7 +75,7 @@ static int regmap_encx24j600_sfr_read(void *context, u8 reg, u8 *val,
 		if (unlikely(ret))
 			return ret;
 	} else {
-		/* Translate registers that are more effecient using
+		/* Translate registers that are more efficient using
 		 * 3-byte SPI commands
 		 */
 		switch (reg) {
@@ -129,7 +129,7 @@ static int regmap_encx24j600_sfr_update(struct encx24j600_context *ctx,
 		if (unlikely(ret))
 			return ret;
 	} else {
-		/* Translate registers that are more effecient using
+		/* Translate registers that are more efficient using
 		 * 3-byte SPI commands
 		 */
 		switch (reg) {

drivers/net/ethernet/microchip/encx24j600.c

@@ -569,7 +569,7 @@ static void encx24j600_dump_config(struct encx24j600_priv *priv,
 	pr_info(DRV_NAME " MABBIPG: %04X\n", encx24j600_read_reg(priv,
 								 MABBIPG));
 
-	/* PHY configuation */
+	/* PHY configuration */
 	pr_info(DRV_NAME " PHCON1:  %04X\n", encx24j600_read_phy(priv, PHCON1));
 	pr_info(DRV_NAME " PHCON2:  %04X\n", encx24j600_read_phy(priv, PHCON2));
 	pr_info(DRV_NAME " PHANA:   %04X\n", encx24j600_read_phy(priv, PHANA));
@@ -837,7 +837,9 @@ static void encx24j600_hw_tx(struct encx24j600_priv *priv)
 		dump_packet("TX", priv->tx_skb->len, priv->tx_skb->data);
 
 	if (encx24j600_read_reg(priv, EIR) & TXABTIF)
-		/* Last transmition aborted due to error. Reset TX interface */
+		/* Last transmission aborted due to error.
+		 * Reset TX interface
+		 */
 		encx24j600_reset_hw_tx(priv);
 
 	/* Clear the TXIF flag if were previously set */

drivers/net/ethernet/microchip/encx24j600_hw.h

@@ -243,7 +243,7 @@ int devm_regmap_init_encx24j600(struct device *dev,
 
 /* MAIPG */
 /* value of the high byte is given by the reserved bits,
- * value of the low byte is recomended setting of the
+ * value of the low byte is recommended setting of the
  * IPG parameter.
  */
 #define MAIPGH_VAL 0x0C